VFJ-UNIK-001

Holly Development CO., LTD

Bluetooth Vibrator

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Nov 12, 2007
Application Purpose: Original Equipment
Date of Application: Nov 12, 2007
Equipment Note: Bluetooth Vibrator
Frequency Range: 2402.00000000 - 2480.00000000
Company: Holly Development CO., LTD
Country: Taiwan

Documents & Files

Select a file to view

Users Manual

Attestation Statements

Cover Letter(s)

External Photos

ID Label/Location Info

Internal Photos

Parts List/Tune Up Info

Test Report

Test Setup Photos

Document Text Content (9 documents)

Attestation Statements

Spider-Man Monster Truck OWNER'S MANUAL Please read before using this equipment Radioshack Spider-Man truck is built to handle the road in style and dazzle your friends with sonic speeds! Built to 1114 scale. Your truck is available in two frequencies (27 and 49 MHz) and 3 selectable bands to let you race against other 5 radio-controlled racers. Check the truck's box to see which frequency your Spider-Man truck uses. Set the band A, B or C on the chassis inside the battery compartment to match with the band (Preset is A] setting on the transmitter. If you need to change the band setting, make sure to match both the truck and the transmitter band settings. NOTE: Make sure you're not pressing a transmitter control when you adjust the Selector switch. "H" & "1" Gear Select "H" or "L" Gear by adjusting the Gear switch on the back of Truck. "H" Gear is suitable for running on flat and wide places and your Truck runs faster on "H" Gear. "L" Gear is suitable for running on rough and narrow places. If the Gear switch does not change smoothly, turn the rear wheels slightly by hand to facilitate the gear change. FCC DECLARTION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. THE FCC WANTS YOU TO KNOW This equipment has tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation; this equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Cover Letter(s)

Andrew Corporation 108 Rand Park Drive Garner, NC U.S.A. 27529 Tel: (919) 771-2570 Fax: (919) 771-2360 www.andrew.com 2 July 2007 Equipment Authorization Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: BCR-RPT-853D5 Product Name: MR853D miniRepeater Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: • Schematic: MRx03D Schematics.pdf • Manual: MRx03D Manual.pdf • Datasheet: MRx03D Datasheet.pdf • Block Diagram: MRx03D Block Diagram.pdf These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. The manual is only provided for use by trained technicians and is not available to the general user from Andrew’s website. Dated this 2 Day of July 20 07 By: Michael Williamson Signature Printed Title: Product Manager On behalf of : Andrew Corporation Telephone: (919) 329 8941

Contact Information

Applicant

John Huang(Manager)

[email protected]886-3-5508919Fax: 886-3-6587437

Test Firm

Compliance Certification Services Inc.Kurt Chen

[email protected]886-3-3240332Fax: 886-3-3245235

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	1.30 mW

Confidentiality

Long Term

Grant Notes

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Cover Letter(s)

Andrew Corporation 108 Rand Park Drive Garner NC 27529 Tel: (919) 329-8941 Fax: (919) 329-8950 www.andrew.com 17 October, 2006 Attn: Director of Certification Authority to Act as Agent I appoint Tom Tidwell, National Technical Systems to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by American TCB, still resides with Andrew Corporation, 108 Rand Park Drive, Garner, NC 27529. Dated this _17 th _day of _October_, 2006__. Agency Agreement Expiration Date: 17 October, 2007 By: __________________________ Michael Williamson (Signature) (Print name) Title: Product Manager On behalf of: Andrew Corporation Telephone: 919-329-8941

External Photos

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 31, 2007 RE: FCC ID: BCR-853D5_ATCB005236 Attention: Tom Tidwell I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that the above FCC ID requests grant of certification in the Part 22 cell bands. Please note that the operational description indicates that the device is band selectable and that other than the above mentioned bands may be selected. It appears that the particular band selected determines the model number. The operational description is not clear on this issue. As this is a part 22 only application, the user cannot make the device operate on other than the frequency bands requested. Please explain how this is prevented for this particular model device. 2. Please note that as this is a booster/amplifier operating under the license of a base station and can be used in other than a licensed station location (i.e. in buildings etc) rf exposure must be addressed at the time of certification as it cannot be addressed at the time of licensing. Please provide an MPE report for the device. Please also show in the manual rf exposure information. 3. Please note that the report calls this device a repeater while other documentation (i.e. 731) calls the device a booster. Please explain, is this device a repeater or a booster? 4. Please provide separate internal photos of the device as required by the FCC. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In ...

ID Label/Location Info

July 31, 2007 RE: FCC ID: BCR-853D5_ATCB005236 Attention: Tom Tidwell I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that the above FCC ID requests grant of certification in the Part 22 cell bands. Please note that the operational description indicates that the device is band selectable and that other than the above mentioned bands may be selected. It appears that the particular band selected determines the model number. The operational description is not clear on this issue. As this is a part 22 only application, the user cannot make the device operate on other than the frequency bands requested. Please explain how this is prevented for this particular model device. The band of operation is set by the model number the model 853D5 operates only in the Cellular band (824 – 849 MHz / 869 – 894 MHz). This is denoted by the model number 853D, The number 5 in the model designation indicates that the booster has a 5 MHz filter width. The filter can be tuned across the cellular band but the user cannot configure the booster to operate outside the cellular band. 2. Please note that as this is a booster/amplifier operating under the license of a base station and can be used in other than a licensed station location (i.e. in buildings etc) rf exposure must be addressed at the time of certification as it cannot be addressed at the time of licensing. Please provide an MPE report for the device. Please also show in the manual rf exposure information. Please find the requested MPE report. The user manual includes a statement on page 1 warning the installer/user to maintain a 20 cm. separation distance between the antenna and nearby persons. The maximum antenna gain stated in the manual is 12 dBi 3. Please note that the report calls this device a repeater while other documentation (i.e. 731) calls the device a booster. Please explain, is this device a repeater or a booste...

Users Manual

This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full. NTS Plano, 1701 E. Plano Pkwy., Plano, TX 75074 Tel: (972) 509-2566, Fax: (972) 509-0073 Page 1 of 114 Certification Test Report CFR 47 FCC Part 2 and Part 22, Subpart C Model: MR853D FCC ID No.: BCR-853D5 Project Code: W7220-4 Revision: 0 Prepared for: Andrew Corporation 108 Rand Park Drive Garner, North Carolina 27529 Author: Tom Tidwell, Manager of Wireless Services Issued: 11 July, 2007 1701 E. Plano Parkway, Suite 150 Plano, Texas 75074 Phone: (972) 509-2566 Fax: (972) 509-0073 Model: MR853D Compliance Test Report FCC ID.: BCR-853D5 This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar ...