VJC-E9T210UKinetic Switch Module

© 2026 Ad Hoc Electronics | Page 1 USER MANUAL E9T-210U Kinetic Switch Module 902 MHz Frequency January 2026 Published by: Ad Hoc Electronics Lindon, Utah, United States www.adhocelectronics.com © Ad Hoc Electronics All Rights Reserved Important! This information describes the type of component and shall not be considered as assured characteristics. © 2026 Ad Hoc Electronics | Page 2 No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Ad Hoc Electronics website: http://www.adhocelectronics.com. As far as patents or other rights of third parties are concerned, liability is only assumed for devices, not for the described applications, processes and circuits. Ad Hoc Electronics does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. Devices or systems containing RF components must meet the essential requirements of the local legal authorities. © 2026 Ad Hoc Electronics | Page 3 © 2026 Ad Hoc Electronics | Page 4 1. GENERAL DESCRIPTION The E9T-210U pushbutton transmitter from Ad Hoc Electronics is a drop-in replacement for the EnOcean PTM 210U module. This module enables the implementation of wireless switches and remote controls without batteries. The E9T-210U is self-powered (no batteries) and therefore maintenance-free. The power is provided by a built-in electro-dynamic power generator. The main application is wireless switches in smart buildings. Products based on E9T-210U modules can also be used in hermetically sealed systems or in remote (not easily accessible) locations. The E9T-210U operates at 902.875 MHz and is compliant with FCC and Industry Canada regulatory requirements for the North American market. 1.1 Product Specifications Parameter Specification Model E9T-210U Frequency 902.875 MHz (FSK) Power Supply Electro-dynamic power generator Antenna Integrated PCB antenna Data Rate 125 kbps Conducted Output Power +10 dBm Transmission Range Typical 300 m free field, typical 30 m indoor Channels Two channels with two pushbuttons per channel Device Identifier Individual 32-bit ID (factory programmed) Redundant Sub-telegrams 3 per transmission Radio Standard ERP2 based on ISO/IEC 14543-3-11 Equipment Profile F6-02-04, F6-04-02 1.2 Mechanical Interface Parameter Specification Device Dimensions 40.0 x 40.0 x 11.2 mm Device Weight 20 g ± 1 g © 2026 Ad Hoc Electronics | Page 5 Energy Bow Travel 1.8 mm Operating Force Typical 9 N at room temperature Restoring Force Typical 0.7 N to 4 N (min 0.5 N required) Number of Operations Typical 100,000 actuations at 25°C Cover Material Hostaform (POM) Energy Bow Material PBT (50% GV) 1.3 Environmental Conditions Parameter Specification Operating Temperature -25°C to +65°C Storage Temperature -25°C to +65°C Humidity 0% to 95% r.h. © 2026 Ad Hoc Electronics | Page 6 2. FUNCTIONAL DESCRIPTION The E9T-210U contains an electro-dynamic energy transducer which is actuated by a bow. This bow is pushed by an appropriate push button, switch rocker or a similar construction mounted onto the device. An internal spring will release the energy bow as soon as it is not pushed down anymore. When the energy bow is pushed down, electrical energy is harvested and a radio telegram is transmitted. Releasing the energy bow similarly generates energy which is used to transmit another radio telegram. 2.1 Contact Nipples Assignment The E9T-210U provides four contact nipples. They are grouped into two channels (Channel A and Channel B) each containing two contact nipples (State O and State I). The nipples are therefore referred to as: AO, AI, BO and BI. The state of all four contact nipples is transmitted together with a unique device identification whenever the energy bow is pressed or released as a part of an EnOcean radio telegram. 2.2 EnOcean Equipment Profiles The EnOcean Equipment Profile (EEP) defines how the data within an EnOcean telegram is encoded. The E9T-210U supports the following ERP2 profiles: • F6-02-04 - Rocker switch, 2 rockers • F6-04-02 - Key card switch Note: There is no EEP Teach-in message sent by the E9T-210U. The receiver must be configured to recognize these profile types. © 2026 Ad Hoc Electronics | Page 7 3. PRODUCT LABEL SPECIFICATIONS The product label is a critical component for product identification, traceability, and regulatory compliance. This section provides comprehensive specifications for the label design, content, and QR code structure. 3.1 Label Layout and Content The product label must contain the following information: Field Content / Example Model E9T-210U Frequency 902.875 MHz Company Name Ad Hoc Electronics EnOcean ID Unique 32-bit ID in hexadecimal format (8 hex digits) Example: 0x00500100 FCC ID FCC: [Your FCC ID] IC ID IC: [Your IC ID] Production Date Week / Year format Example: 03 / 26 (3rd week of 2026) QR Code Machine-readable code containing product tracking information (See Section 3.2 for detailed QR code structure) © 2026 Ad Hoc Electronics | Page 8 3.2 QR Code Structure The QR code is CRITICAL for product traceability and must encode information according to the EnOcean Alliance Labeling standard (ANSI MH10.8.2 format). The QR code contains a text string with multiple information containers separated by the "+" character. 3.2.1 QR Code Example Example QR code string: 30S00500100+1P000800000023+30PE9T-210U+2PA01 3.2.2 QR Code Field Definitions Identifier Description Length Example Value 30S EnOcean Radio ID (32-bit format) 11 characters (3 + 8 hex digits) 30S00500100 + Field Separator 1 character + 1P EnOcean Alliance Product ID 14 characters (2 + 12 hex digits) 1P000800000023 + Field Separator 1 character + 30P Product Model Number 13 characters (3 + 10 alphanumeric) 30PE9T-210U + Field Separator 1 character + 2P Step Code and Revision 6 characters (2 + 4 alphanumeric) 2PA01 Exampl…

Text truncated - open the document above for the full version.

Appendix-E9T-210U-Photos Page 3 of 8 2. Photographs –Constructional Details 2.1. EUT – External View Model E9T-210U FCC ID: VJC-E9T210U Appendix-E9T-210U-Photos Page 4 of 8 Appendix-E9T-210U-Photos Page 5 of 8

Appendix-E9T-210U-Photos Page 6 of 8 2.2. EUT – Internal View Model E9T-210U FCC ID: VJC-E9T210U Appendix-E9T-210U-Photos Page 7 of 8 ANT Appendix-E9T-210U-Photos Page 8 of 8 ======End======

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 7 TEST REPORT Reference No. .................... : WTN26D01008356W003 FCC ID ................................ : VJC-E9T210U Applicant ............................ : Ad Hoc Electronics, LLC Address .............................. : 115 S State St B, Lindon, UT84042, United States Manufacturer .................... : Ad Hoc Electronics, LLC Address ............................. : 115 S State St B, Lindon, UT84042, United States Factory ............................... : Wuhan Linptech Co., Ltd Address ............................. : Rm 305, R&D Center, No. 8, Fortune Second Road, Donger Industrial Park, East Lake New Technology Development Zone, Wuhan, Hubei, China Product ............................... : Kinetic Switch Module Model(s). ............................ : E9T-210U Standards........................... : 47CFR FCC Part 2 Subpart J Section 2.1093 Date of Receipt Sample .... : 2026-01-15 Date of Test ....................... : 2026-01-20 to 2026-01-30 Date of Issue ...................... : 2026-03-27 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTN26D01008356W003 Page 2 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2. CONTENTS ............................................................................................................................................... 2 3. REVISION HISTORY ................................................................................................................................. 3 4. GENERAL INFORMATION ....................................................................................................................... 4 4.1. GENERAL DESCRIPTION OF E.U.T.................................................................................................... 4 4.2. DETAILS OF E.U.T. ......................................................................................................................... 4 4.3. TEST FACILITY ................................................................................................................................ 5 4.4. SUBCONTRACTED ........................................................................................................................... 5 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 5. TEST SUMMARY ...................................................................................................................................... 6 6. RF EXPOSURE ......................................................................................................................................... 7 6.1. PROCEDURES AND REQUIREMENTS ................................................................................................. 7 6.2. CALCULATION METHOD ................................................................................................................... 7 6.3. TEST RESULT ................................................................................................................................. 7 Reference No.: WTN26D01008356W003 Page 3 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3. Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose Comment Approved WTN26D01008356W003 2026-01-15 2026-01-20 to 2026-01-30 2026-03-27Original - Valid Reference No.: WTN26D01008356W003 Page 4 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: Kinetic Switch Module Model(s): E9T-210U Model Description: N/A Test Sample No.: 1-1/1 Hardware Version: V1.3 Software Version: V1.1 4.2. Details of E.U.T. Operation Frequency: 902.875±0.5MHz Max. RF output power: 8.15dBm Type of Modulation: FSK Antenna installation: PCB Antenna Antenna Gain: -6.87dBi Note: #: The antenna gain is provided by the applicant, and the applicant should be responsible for its authenticity, WALTEK lab has not verified the authenticity of its information. Ratings: Self -power generation Reference No.: WTN26D01008356W003 Page 5 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Testing Group Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Testing Group Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. 4.4. Subcontracted Whether parts of tests for the product have been subcontracted to other labs: Yes No If Yes, list the related test items and lab information: Test Lab: N/A Lab address: N/A Test items: N/A 4.5. Abnormalities from Standard Conditions None. Reference No.: WTN26D01008356W003 Page 6 of 7 Waltek Testing Gro…

Text truncated - open the document above for the full version.

MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page1of 6 REPORTNo.：SZ26010473E01 AnnexDEUTPhotos 1.Testenvironment MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page2of6 REPORTNo.：SZ26010473E01 2.EUT MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page3of6 REPORTNo.：SZ26010473E01 MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page4of6 REPORTNo.：SZ26010473E01 MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page5of6 REPORTNo.：SZ26010473E01 MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page6of6 REPORTNo.：SZ26010473E01

NOTE:ThisdocumentisissuedbyShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,thetestreportshallnotbereproducedexceptin fullwithoutpriorwrittenpermissionofthecompany.Thetestresultsapplyonlytotheparticularsample(s)testedandtothespecifictestscarried outwhichisavailableonrequestforvalidationandinformationconfirmedatourwebsite. MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page1of 11 REPORTNo.：SZ26010473E01 TESTREPORT APPLICANT:WuhanLinptechCo.,Ltd PRODUCTNAME:PCBPrintedAntenna MODELNAME:N/A TRADENAME:N/A BRANDNAME:N/A STANDARD(S):IEEEStd149-2021 RECEIPTDATE:2026-01-30 TESTDATE:2026-02-02 ISSUEDATE:2026-02-10 Editedby: MaoRujie(Rapporteur) Approvedby: ChiShide(Supervisor) MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page2of11 REPORTNo.：SZ26010473E01 DIRECTORY 1.TechnicalInformation ........................................................................................................3 1.1.ApplicantandManufacturerInformation ....................................................................3 1.2.EquipmentUnderTest(EUT)Description...................................................................3 2.TestResults........................................................................................................................4 2.1.AppliedReferenceDocuments.....................................................................................4 2.2.TestConditions...............................................................................................................4 2.3.MeasurementUncertainty.............................................................................................4 2.4.TestResultslists.............................................................................................................5 AnnexATestSetupPhotos..................................................................................................6 AnnexBFigures .....................................................................................................................7 1.2DRadiationPattern .........................................................................................................7 2.3DRadiationPattern .........................................................................................................8 AnnexCTestingLaboratoryInformation .........................................................................10 1.IdentificationoftheResponsibleTestingLaboratory ................................................10 2.IdentificationoftheResponsibleTestingLocation....................................................10 3.TestEquipmentUtilized..................................................................................................10 3.1TestEquipments............................................................................................................10 3.2TestSoftware..................................................................................................................10 Notes......................................................................................................................................11 AnnexDEUTPhotos ChangeHistory VersionDateReasonforchange 1.02026-02-10Firstedition Note:thelatestrevisionofthereportsupersedesallpreviousversion. MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page3of11 REPORTNo.：SZ26010473E01 1.TechnicalInformation Note:Providebyapplicant. 1.1.ApplicantandManufacturerInformation Applicant: WuhanLinptechCo.,Ltd ApplicantAddress: Rm305,R&DCenter,No.8,FortuneSecondRoad,Donger IndustrialPark,EastLakeNewTechnologyDevelopmentZone, Wuhan,Hubei,China Manufacturer: WuhanLinptechCo.,Ltd ManufacturerAddress:Rm305,R&DCenter,No.8,FortuneSecondRoad,Donger IndustrialPark,EastLakeNewTechnologyDevelopmentZone, Wuhan,Hubei,China 1.2.EquipmentUnderTest(EUT)Description WirelessTypeN/A Frequency902MHz-928MHz AntennaTypePCBAntenna ProductHWVersionN/A ProductSWVersionN/A SerialNumberN/A SampleNo.1# MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page4of11 REPORTNo.：SZ26010473E01 2.TestResults 2.1.AppliedReferenceDocuments Leadingreferencedocumentsfortesting: No.IdentityDocumentTitle 1IEEEStd149-2021 IEEERecommendedPracticeforAntenna Measurements Notes:Anyadditions,deviation,orexclusionsfromthemethodshallbenotedinthe"Remark". 2.2.TestConditions TestEnvironmentConditions ： RelativeHumidity(%):25-75 Temperature(°C):10-30 2.3.MeasurementUncertainty Theuncertaintyiscalculatedusingthemethodssuggestedinthe“GuidetotheExpressionof UncertaintyinMeasurement”(GUM)publishedbyISO. MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page5of11 REPORTNo.：SZ26010473E01 2.4.TestResultslists 2.4.1.Gain Frequency (MHz) Gain(dBi) 902-6.95 904-6.87 906-6.75 908-6.64 910-6.54 912-6.46 914-6.32 916-6.17 918-6.05 920-6.02 922-5.95 924-5.89 926-5.81 928-5.77 MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http:/…

Text truncated - open the document above for the full version.

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 23 TEST REPORT Referen ce No. .................... : WTN26D01008356W002 FCC ID ................................ : VJC-E9T210U Applicant ............................ : Ad Hoc Electronics, LLC Address .............................. : 115 S State St B, Lindon, UT84042, United States Manufacturer .................... : Ad Hoc Electronics, LLC Address ............................. : 115 S State St B, Lindon, UT84042, United States Factory ............................... : Wuhan Linptech Co., Ltd Address ............................. : Rm 305, R&D Center, No. 8, Fortune Second Road, Donger Industrial Park, East Lake New Technology Development Zone, Wuhan, Hubei, China Product ............................... : Kinetic Switch Module Model(s). ............................ : E9T-210U Standards........................... : FCC 47CFR Part 15.247 Date of Receipt Sample .... : 2026-01-15 Date of Test ....................... : 2026-01-20 to 2026-01-30 Date of Issue ...................... : 2026-03-27 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTN26D01008356W002 Page 2 of 23 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 3 4 GENERAL INFORMATION ....................................................................................................................... 4 4.1 General Description of E.U.T. ....................................................................................................... 4 4.2 Details of E.U.T. ............................................................................................................................ 4 4.3 Channel List .................................................................................................................................. 4 4.4 Test Facility ................................................................................................................................... 5 4.5 Subcontracted ............................................................................................................................... 5 4.6 Abnormalities from Standard Conditions ...................................................................................... 5 4.7 Test Mode ..................................................................................................................................... 5 5 TEST SUMMARY ...................................................................................................................................... 6 6 EQUIPMENT USED DURING TEST ......................................................................................................... 7 6.1 Equipments List ............................................................................................................................ 7 6.2 Description of Support Units ......................................................................................................... 8 6.3 Measurement Uncertainty ............................................................................................................ 8 6.4 Test Equipment Calibration .......................................................................................................... 8 7 DUTY CYCLE ............................................................................................................................................ 9 8 RADIATED EMISSIONS ......................................................................................................................... 10 8.1 EUT Operation ............................................................................................................................ 10 8.2 Test Setup .................................................................................................................................. 11 8.3 Spectrum Analyzer Setup ........................................................................................................... 12 8.4 Test Procedure ........................................................................................................................... 13 8.5 Corrected Amplitude & Margin Calculation ................................................................................ 13 8.6 Summary of Test Results ........................................................................................................... 14 9 CONDUCTED SPURIOUS EMISSIONS ................................................................................................. 15 9.1 Test Procedure ........................................................................................................................... 15 9.2 Test Result .................................................................................................................................. 16 10 BAND EDGE MEASUREMENT .............................................................................................................. …

Text truncated - open the document above for the full version.

Appendix-E9T-210U-Photos Page 1 of 8 1. Test Setup photos Model E9T-210U FCC ID: VJC-E9T210U 1.1 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# For 30MHz-1000MHz Test Site 2# Appendix-E9T-210U-Photos Page 2 of 8 For Above 1GHz Test Site 1#