VKO-FX855PGSM Fixed Wireless Phone

FX855P Dual Band GSM Fixed Wireless Phone USER’S GUIDE (Back cover) Motorola, the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo are registered in the U.S. Patent & Trademark Office. All other products or service names are the property of their respective owners. © Motorola, Inc. 2007. All rights reserved. The information contained in the FX855P user guide is believed to be correct at the time of printing. We reserve the right to change or modify any information, product specifications, features or functionality without notice. The contents of the FX855P user guide are provided “as is.” Certain features may not be activated by your service provider, and/or their network settings may limit the feature’s functionality. Additionally, certain features may require a subscription. Contact your service provider for details. FX855P User Guide version 1.0 08/14/2007 © Copyright 2007, Motorola Inc., All rights reserved This page is intentionally left blank WELCOME Congratulations on the purchase of your Motorola FX855P product! Please retain your original dated sales receipt for your records. For warranty service of your Motorola FX855P product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Thank you for choosing a Motorola product. Please read important safety instructions before use. Read and understand all instructions before use. Please retain this guide for future reference. 1 1. PREPARING YOUR PHONE FOR USE Before using your phone, the phone must be setup according to the following instructions. 1.1. Installing the coiled cord xConnect the coiled cord to both the handset and the base. 1.2. Plugging the AC/DC adaptor zConnect the adaptor to the AC Wall outlet. 2 1.3. Backup Battery xRemove the battery door. xInsert the rechargeable battery pack into the battery compartment. xReplace the battery door. Note: The battery pack is a backup for emergencies in case of a power failure. Do not operate the phone without having the AC/DC adaptor connected. Be sure to carefully match the positive and negative terminals as shown on the battery. Caution: xIt is prohibited to use the SIM card for this Fixed Wireless Phone in other GSM mobile phones. Once the SIM pin number is entered, the SIM pin is automatically changed so the initial PIN is no longer valid. Therefore, it is highly recommended NOT to take out the SIM card once it is installed in this product. xDO NOT bend or scratch your SIM card, and avoid exposing it to static electricity, water, or dirt. 3 2. FEATURE HIGHLIGHTS zVoice mail zShort Message Service zEmergency call zCall logs zCall restriction zCaller ID zClock with alarm zCalculator zCordless function zBlue back light zMultiple ring tones zAdjustable ring tone zProfile setting zGraphic display zMulti language z100 phone book memories and 250 phone book memory additionally suppo rted by SIM card. zKeypad lock zDial tone generation zLong Message Service up to 450 characters zAntenna bar zBattery bar zEar phone / microphone jack 4 3. ABOUT THE PHONE This phone can operate in different bands (depending on the service provider). It supports dual band (850MHz / 1900MHz or 900MHz / 1800MHz). 3.1. Part of the Phone 5 3.2. Identifiers On your phone, you have two types of identifiers: indicators and icons. Icons are graphic representations of a specific item or situation. For example, an icon appears when you have a voice message waiting. Indicators show the status of something. The phone uses three types of indicators: zSignal strength indicator: This indicator shows the signal strength of the wireless network at your current location. The higher the bar, the stronger the signal. zRinger volume indicator: When you press , the upper key once during standby, you are able to enter the ringer volume adjustment. Scrolling up and down using the key adjusts the ringer volume higher or lower. The list below shows what each icon means. Tells you the strength of the network signal. Battery indicator You have one or more unread text messages waiting. The alarm has been set and is on. 6 4. BASIC OPERATIONS 4.1. Switching the phone ON and OFF Case 1: zTo turn the phone ON, plug the power cable into the phone. zTo reset the phone, press and hold the key. 4.2. Making a call Case 1: xDeactivate the Key guard, if it is ON. xPick up the handset, and dial tone is generated. xEnter the phone number, including the area code, and press .( if you don't p ress , the phone will call the number which you had input after 6 s econd.) . xPress to end the call or to cancel the call attempt. If handset is placed in its base, call is automatically terminated. Case 2: xEnter the phone number with the handset on the base. xPress . The phone enters speaker mode. 7 xPress to end the call or to cancel the call attempt. If speaker button is pressed, the call is automatically terminated. 4.3. Answering a call. Case 1: xWhen the phone rings, press the Send button. The phone will be in speaker mode. 4.4. Speaker mode. You can make or answer a phone call by pressing when the handset is on the base. To make a call: xPress to turn ON the speaker phone mode. xIf you hear the dial tone, press the number you want to connect to. xPress .( if you don't press , the phone will call the number whi ch you had input after 6 second.) To answer a call: xWhen the phone rings, press to turn ON the speaker phone mode. Note: You can mute the microphone during a call by pressing the key. The handset can be unmuted by pressing the . When the handset is muted, the caller cannot hear you, but you ca n still hear them. 4.5. Adjusting the Volume 4.5.1. Adjusting the ringer volume 8 You can adjust the ring tone volume. 1. Press up to enter the ring volume control screen. 2. Press right to increase the volume. 3.Press left to decrease the volume. 4.5.2. Adjusting earpiece volume You can adjust the earp…

Text truncated - open the document above for the full version.

Date: 06 Sep, 2007 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Brightstar Corporate , the undersigned, hereby authorizes Morlab, to act on the behalf of the Brightstar Corporate solely in matters relating to the application for an FCC equipment authorization for FCC ID # VKO-FX855P including the signing of documents in connection with this Application. Necessary acts carried out by Brightstar Corporate on our behalf of the Brightstar Corporate in connection with the Application shall have the same effect as acts of the Brightstar Corporate. The Brightstar Corporate also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely,

Date: 06 Sep, 2007 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Brightstar Corporate FCC ID: VKO-FX855P FCC Part 22&24 Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Brightstar Corporate requests that the following documents regarding this submission for FCC ID: VKO-FX855P be kept confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Circuit Diagram.pdf Operational Description Operational Description.pdf Part list BOM.pdf Tune-Up-Procedure Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which Brightstar Corporate considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Brightstar Corporate considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market.

External Photos 1. Front View of EUT 2. Inside View of EUT 3. Back View of EUT 4. Side View of EUT

Label Label Location

Internal Photos

Calculation and sample for Confirmation The maximum measured power output is： GSM 850MHz: (ERP) is 33.17 dBm, GSM 1900MHz: (EIRP) is 31.61 dBm, the maximum antenna gain is 2 dBi. The maximum permissible exposure is defined in 47 CFR 1.1310 with 1 mW/cm 2 for GSM1900MHz and f/1500 mW/cm 2 for GSM850MHz. The transmitter is using indoor antennas that operate at 25 cm or more from nearby persons. The maximum permitted level is calculated using the general equation: S = P*G/4πR 2 For 850MHz: P*G=EIRP =33.17+2.15=35.32dBm=3404 mW For 1900MHz: P*G=EIRP =31.61dBm=1448 mW R = 25 cm π = 3.1416 Solving for S, the power density at 25 cm is 0.433 mW/cm 2 for GSM850MHz and 0.184 mW/cm 2 for GSM1900MHz So The power density limit for GSM850Hz and 1900MHz is kept.

2 <Drawn By> <Checked By> <QC By> <Released By> 2007-5-29 <Checked Date> <QC Date> <Release Date> PuTian YiTong Mainboard of GSM Desktop <Code> A2 V0.1 <Scale> 1 2 REV: SIZE: CODE: DRAWN: DATED: DATED: CHECKED: QUALITY CONTROL: DATED: DATED: RELEASED: COMPANY: TITLE: DRAWING NO: SHEET: OF SCALE: REVISION RECORD A B C D DATE: 1 2 3 4 5 6 D C B A LTR ECO NO: APPROVED: D3 5.5V 1 EARP 2 EARN 3 MICP 4 MICN J2 EARPHONE_1 R21 1.5KOhm_5% C39 10uF_X5R C57 10pF_5%_NM R18 10KOhm_5%_NM C72 100nF_20% C88 100nF_20% C89 33pF_5% C90 33pF_5% C91 33pF_5% R20 1.5KOhm_5% D15 5.5V D16 5.5V R12 2.2KOhm_5% C9 4.7uF_X5R 1 2 MIC1 C13 cap0402_nm C23 100nF_20% C60 100nF_20% C77 10pF_5%_NM R48 10KOhm_5%_NM R49 0Ohm_5%_NM C78 10PF_NM C79 10PF_NM C80 10PF_NM C81 33PF C82 33PF C83 33PF R52 1KOhm_5% D20 5.5V R46 4.7Ohm_ 5% R47 4.7Ohm_ 5% C92 33pF_5% C93 33pF_5% C94 33pF_5% R53 100KOhm _5% press un_press 1 2 3 6 5 4 HK1 HOOK R54 47KOhm _5% D26 5.5V 1 2 J6 SPEAKER_DESK R3 10KOhm _5% C6 33pF_5% C5 33pF_5% D21 5.5V D25 5.5V C8 100nF_10% R4 ́ÅÖé R19 ́ÅÖé R36 ́ÅÖé R37 ́ÅÖé D22 18V C20 33pF_5% C22 33pF_5% C42 33pF_5% D23 18V R26 ́ÅÖé R24 ́ÅÖé C12 100nF_20% R51 ́ÅÖé R55 ́ÅÖé GND ANT 1 GND 37 VIO 35 RXD 36 TXD 28 KB_BL/GPO6 45 SIM_IO 43 SIM_CLK 47 SIM_RST 38 VSIM 39 VRTC 31 KBOUT4 42 ON/OFF 21 KBOUT3 24 KBOUT2 30 KBOUT1 20 KBOUT0 34 GND 58 EPP1 18 LCD_BL/GPO3 48 GND 12 D0 11 D1 10 D2 9 D3 8 D4 7 D5 6 D6 5 D7 13 GPO2/MTSR0 14 LCD_WRN 16 LCD_RSTN/GPO4 15 LCD_CSN/GPO5 17 LCD_RS 27 RESET 59 EPN1 55 MICP2 54 MICN2 57 MICP1 56 MICN1 52 VMIC 63 VANA 53 EXT_MIC 60 EPPA1 44 HS_DET 25 GPO1/SCLK0 26 GND 29 KBIN0 22 KBIN1 32 KBIN2 33 KBIN3 23 KBIN4 61 LOUT1 62 LOUT2 40 GND 50 CHG_DETECT 49 CHG_SWITCH 2 VBAT 3 VBAT 46 TBAT 51 GND 19 GND 41 GPO0/MRST0 66 GND 64 GND 65 GND 4 GND MODULE1 GSM001A_OK C3 100nF_10% C4 100nF_10% C14 4.7uF_X5R EPPA1 VANA MICP2 MICN2 VMIC MICP1 MICN1 EPN1 EPP1 LOUT1 LOUT2 VIO RXD TXD KEYPAD_LED SIM_IO SIM_CLK SIM_RST VSIM VRTC KEYOUT4 ON KEYOUT3 KEYOUT2 KEYOUT1 KEYOUT0 KEYIN4 KEYIN3 KEYIN2 KEYIN1 KEYIN0 HS_DET EPPA1 EXT_MIC VANA VMIC MICN1 MICP1 MICN2 MICP2 EPN1 EPP1 LOUT1 LOUT2 D1 D0 D2 D3 D4 D5 D6 D7 WRN CS3N LCD_RSTN LCD_RS LCD_BL_PWM CHARGE_DETECT CHARGE_SWITCH VBAT TBAT CHG_OVER HS_DET VBAT SPK+ SPK- EXT_MIC VANA EARP LOUT1 LOUT2 SPK+ SPK- CHG_IN RESET RESET Mainboard of GSM Desktop 2 V0.1 APPROVED: ECO NO: LTR A B C D 6 5 4 3 2 1 DATE: D C B A REVISION RECORD SCALE: SHEET: OF DRAWING NO: TITLE: COMPANY: RELEASED: DATED: DATED: QUALITY CONTROL: CHECKED: DATED: DATED: DRAWN: CODE: SIZE: REV: 2 <Scale> 2 A2 <Code> PuTian YiTong <Release Date> <QC Date> <Checked Date> 2007-5-29 <Released By> <QC By> <Checked By> <Drawn By> LCD_INTERFACE KEYBOARD_INTERFACE SIM_INTERFACE UART_INTERFACE CHARGE_IN BATTERY_IN C40 1uF_10%_16V R56 4.7KO hm_5% C76 100nF_10% 1 2 3 T6 PDTC143ZE 1 2 D52 5.5V 1 2 D48 5.5V 1 2 D44 5.5V 1 2 D40 5.5V 1 2 D38 5.5V 1 2 D30 5.5V 1 2 D57 5.5V 1 2 D9 5.5V 1 2 D24 5.5V 1 2 D28 5.5V 1 2 D19 5.5V 1 2 D33 5.5V 1 2 D46 5.5V 1 2 D47 5.5V 1 2 D49 5.5V 1 2 D50 5.5V 1 2 D51 5.5V 1 2 D53 5.5V 1 2 D54 5.5V 1 2 D55 5.5V 1 2 D56 5.5V 1 2 D58 5.5V 1 2 D59 5.5V R38 100Ohm R39 47Ohm R40 100Ohm 1 2 D2 5.5V 1 2 D60 5.5V 1 2 D61 5.5V C16 1uF_10%_16V C49 33nF_10% R6 1.8KOhm_1% R5 res0603_nm 1 2 D18 BAT60B 2 1 3 T2 BC847BW 3 1 2 T1 FMMTL718 C7 100nF_10%_NM D1 ESD_18V_NM + C29 47uF_6.3V + C45 47uF_6.3V 5 EXPOW 4 3 2 1 GND J1 USB_CON D63 5.5V D64 5.5V 1 2 3 T3 PDTC143ZE C73 1uF_10%_16V 1 2 D5 5.5V 1 2 D6 5.5V 1 2 D7 5.5V 1 2 3 J4 POWER_IN + C74 100uF D8 1N5819 1 2 L7 220uH C85 470pF_5% R11 0 Ohm_5%_nm 8 D_COLLECTOR 7 I_SENSE 6 VCC 5 CI_INPUT 1 S_COLLECTOR 2 S_EMITTER 3 T_CAP 4 GND U1 MC34063A R22 0.15 Ohm R25 3.6KOhm_5% R29 1.2K Ohm_5% + C86 470uF C87 1uF_10%_16V R43 47Ohm R44 47Ohm R45 47Ohm 1 2 D10 5.5V 1 2 D11 5.5V 1 2 D12 5.5V 1 2 D13 5.5V 1 2 D14 5.5V D17 1N5819_NM R15 330Ohm 2 VCC 3 VPP 5 DATA 6 CLK 4 RST 1 GND SIM1 1 2 3 J5 BAT_DIP3 1 2 3 SW1 SW-SS12F23A 1 2 3 J3 BAT_2PIN 1 H1 HOLE2.8MM 1 H2 HOLE2.8MM 1 H5 HOLE2.8MM 1 H3 HOLE2.8MM 1 MK1 MARK-2MM 1 MK2 MARK-2MM 1 MK3 MARK-2MM 1 MK4 MARK-2MM 1 H4 HOLE2.8MM R1 0Ohm_5% R2 0Ohm_5% R13 0hm_5% R14 0hm_5% R16 0hm_5% R17 0hm_5% R23 0hm_5% R27 0hm_5% R28 0hm_5% R30 0hm_5% R31 0hm_5% R32 0hm_5% R33 0hm_5% R35 0hm_5% 1 2 D4 5.5V C10 10pF_5% C11 10pF_5% R41 0Ohm_5% D27 1N5819 R42 ÈÈÃôμç×è R50 ÈÈÃôμç×è R57 22Ohm 1 LCD_CS 2 RESET 3 D/C 4 R/W 5 D0 6 D1 7 D2 8 D3 9 D4 10 D5 11 D6 12 D7 13 VDD 14 BACKLIGHT 15 VHP-PWR 16 GND LCD1 HEM12864_16 1 VBAT2 2 /IN_USE 3 ON/OFF 4 VRTC2 5 KP0/KO0 6 KP4/KO4 7 KP2/KO2 8 KP3/KO3 9 KP1/KO1 10 KP5/KIN4 11 KP7/KIN1 12 KP8/KIN2 13 KP9/KIN3 14 /BL_ON 15 KP6/KIN0 16 GND 17 SPKOUT+ 18 SPKOUT- KEYPAD1 CONN_KP18 8 BAT 7 IREF 6 IMIN 3 CHG 2 PPR 1 VIN 4 EN 5 GND 0 GND0 U2 ISL6294 R7 27KOhm_1% R8 270KOhm_1% R9 100KOhm_5% R10 100KOhm_5% R34 100KOhm_5% C1 1uF_10%_16V C2 1uF_10%_16V R58 0 Ohm_5%_nm WR RS RST VSIM SIM_IO SIM_CLK SIM_RST KEYPAD_LED KEYOUT0 KEYOUT1 KEYOUT2 KEYOUT4 KEYOUT3 KEYIN4 KEYIN0 KEYIN1 KEYIN2 KEYIN3 DATA[0:15] DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 VIO TBAT VCHARGE CHARGE_SWITCH CHARGE_DETECT RXD TXD VCHARGE VBAT GND CS VBAT LCD_BL_PWM SPK+ SPK- VRTC ON VBAT KEYIN3 KEYIN2 KEYIN1 KEYIN0 KEYIN4 KEYOUT4 KEYOUT3 KEYOUT2 KEYOUT1 KEYOUT0 /IN_USE BL_ON /IN_USE BL_ON D[0:15] CS3N LCD_RSTN LCD_RS WRN D0 D1 D2 D3 D4 D5 D6 D7 DATA[0:15] DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 CS RST RS WR GND2 VCHARGE BAT_VDD CHG_OVER CHG_IN VIO BAT_VDD BAT_VDD VBAT OFF OFF

Report No.: SZ070050045E1 Page 2 of 39 TABLE OF CONTENTS 1.TEST CERTIFICATION ...........................................................................................................4 2.GENERAL INFORMATION ....................................................................................................5 2.1EUT Description .........................................................................................................................5 2.2Test Standards and Results ........................................................................................................6 2.3Facilities and Accreditations ......................................................................................................7 2.3.1Facilities ....................................................................................................................................7 2.3.2Test Equipments ........................................................................................................................7 2.3.3Test Environment Conditions....................................................................................................8 3.47 CFR PART 15B REQUIREMENTS ....................................................................................9 3.1General Information...................................................................................................................9 3.1.1Test Mode..................................................................................................................................9 3.1.2Test Setup: ...............................................................................................................................10 3.1.2.1Conducted Emission Test: ...................................................................................................10 3.1.2.2Radiated Emission Test Setup: ............................................................................................11 3.2Conducted Emission .................................................................................................................11 3.2.1Requirement ............................................................................................................................11 3.2.2Test Description ......................................................................................................................12 3.2.3Test Result ...............................................................................................................................12 3.3Radiated Emission ....................................................................................................................14 3.3.1Requirement ............................................................................................................................14 3.3.2Test Description ......................................................................................................................14 3.3.3Test Result ...............................................................................................................................14 4.47 CFR PART 2, PART 22H REQUIREMENTS ..................................................................16 4.1Frequencies................................................................................................................................16 4.1.1Requirement ............................................................................................................................16 4.1.2Test Description ......................................................................................................................16 4.1.3Test Result ...............................................................................................................................17 4.2Conducted RF Output Power ..................................................................................................19 4.2.1Requirement ............................................................................................................................19 4.2.2Test Description ......................................................................................................................19 Report No.: SZ070050045E1 Page 3 of 39 4.2.3Test Result ...............................................................................................................................19 4.320dB Occupied Bandwidth ......................................................................................................22 4.3.1Definition ................................................................................................................................22 4.3.2Test Description ......................................................................................................................22 4.3.3Test Verdict..............................................................................................................................22 4.4Frequency Stability ...................................................................................................................25 4.4.1Requirement ............................................................................................................................25 4.4.2Test Description ......................................................................................................................25 4.4.3Test Verdict..............................................................................................................................25 4.5Conducted Out of Band Emissions .........................................................................................27 4.5.1Requirement ............................................................................................................................27 4.5.2Test Description ......................................................................................................................27 4.5.3Test Result .......................…

Text truncated - open the document above for the full version.

Report No.: SZ07050045E2 Page 2 of 39 TABLE OF CONTENTS 2.1EUT Description .........................................................................................................................5 2.2Test Standards and Results ........................................................................................................6 NOTE:.....................................................................................................................................................6 2.3Facilities and Accreditations ......................................................................................................7 2.3.1Facilities ....................................................................................................................................7 2.3.2Test Equipments ........................................................................................................................7 2.3.3Test Environment Conditions....................................................................................................8 3.1General Information...................................................................................................................9 3.1.1Test Mode..................................................................................................................................9 3.1.2Test Setup: ...............................................................................................................................10 3.1.2.1Conducted Emission Test: ...................................................................................................10 3.1.2.2Radiated Emission Test Setup: ............................................................................................11 3.2Conducted Emission .................................................................................................................11 3.2.1Requirement ............................................................................................................................11 3.2.2Test Description ......................................................................................................................12 3.2.3Test Result ...............................................................................................................................12 3.3Radiated Emission ....................................................................................................................14 3.3.1Requirement ............................................................................................................................14 3.3.2Test Description ......................................................................................................................14 3.3.3Test Result ...............................................................................................................................14 4.1Frequencies................................................................................................................................16 4.1.1Requirement ............................................................................................................................16 4.1.2Test Description ......................................................................................................................16 4.1.3Test Result ...............................................................................................................................17 4.2Conducted RF Output Power ..................................................................................................19 4.2.1Requirement ............................................................................................................................19 4.2.2Test Description ......................................................................................................................19 4.2.3Test Result ...............................................................................................................................19 4.320dB Occupied Bandwidth ......................................................................................................22 4.3.1Definition ................................................................................................................................22 4.3.2Test Description ......................................................................................................................22 Report No.: SZ07050045E2 Page 3 of 39 4.3.3Test Verdict..............................................................................................................................22 4.4Frequency Stability ...................................................................................................................25 4.4.1Requirement ............................................................................................................................25 4.4.2Test Description ......................................................................................................................25 4.4.3Test Verdict..............................................................................................................................25 4.5Conducted Out of Band Emissions .........................................................................................27 4.5.1Requirement ............................................................................................................................27 4.5.2Test Description ......................................................................................................................27 4.5.3Test Result ...............................................................................................................................27 4.6Band Edge .................................................................................................................................31 4.6.1Requirement ........................................................…

Text truncated - open the document above for the full version.

Test Setup Photos 1. CE 2. CSE 3. RE 4. RSE