VRI-B134PDA with WiFi 802.11 b/g

1 DT430 Quick Start Guide 2 Copyright Copyright©2010 Group Sense Mobile-Tech Limited. All rights reserved. Product specifications and features are for reference only and are subject to change without prior notice. Declaration This Quick Start Guide is published by Group Sense Mobile-Tech Limited without any warranty. Improvement and changes to this Quick Start Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Group Sense Mobile-Tech Limited any time and without notice. Such changes will, however, be incorporated into new editions of this Quick Start Guide. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not 3 cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide aseparation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Important safety information PLEASE READ THIS CAREFULLY BEFORE USING DT430! Always treat your product with care and keep it in a clean and dust-free place. Do not expose DT430 to moisture or humility. Do not expose DT430 to extreme high or low temperatures. 4 Do not attempt to disassemble your product. Use only the chargers and batteries approved by Group Sense Mobile-Tech Limited. The use of any other type may invalidate any approval and warranty. No reserve changing with other chargers, they may have inverse polarity. Never use the charger if the plug is damaged. Never touch the charger if your hands/feet are wet. Do not expose the charger to water, if may cause electrical fires. Do not repair the charger yourself for your safety. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water. Do not let the metal contacts on the battery touch and other metal object, it could lead to short-circuit and damage the battery. Important safety information For DT430 model, only approved batteries, chargers that are 5 designed for the model can be used with DT430 unit. Do not exchange with wrong model battery, it may occur to explosion. Please dispose battery following instruction. 6 Contents Getting to know DT430................. ........................ 7 DT430 overview .................................................7 Battery.............................................................7 Loading/removing battery................................7 Charging battery .........................................7 Getting started.....................................................7 Turn on/offDT430 ............................................... 7 Connect / mount hand strap to DT430........................7 Wi-Fi connection settings....................................... 7 Using Bluetooth.................................................. 7 To enable Bluetooth.........................................7 Bluetooth settings............................................7 Searching for Bluetooth...................................7 DT430 settings......................................................7 Screen rotation..................................................... 7 7 Backlight settings.................................................. 7 System backup...................................................... 7 Getting to know DT430 DT430 overview Name Description 1 Left button 2 Mini SD cover Mini USB cover 8 3 SD card slot Insert external card 4 USB socket Connect to PC for data synchronization 5 ON/OFF button Press to turn on DT430; press and hold to turn off; if DT430 is on, press to suspend 6 Bottom cabinet 7 LED light Show the status for Wi-Fi and battery 8 LED light Programmable LED 9 LED light Light sensor 10 Navigation keyMove the pointer around on the screen. 11 Function key Perform certain actions 12 I/O connector Connect cradle to charge 13 Reset key Reset / reboot device 14 Speaker 15 Battery latch Open / close the battery cover 16 Battery cover 17 Stylus Battery Installing / removing battery To install battery 9 1. Turn over the handheld terminal. 2. Slide the battery latch to the left slightly, and then lift the battery pack cover up in the direction indicated by the arrow. 3. Insert the battery into the battery compartment. Make sure the end of the battery pack removal tape is put on the above the battery pack. 4. Put back the battery pack cover to the compartment as showed, and then slide the battery latch to the right to double lock it. To remove battery 1. Make sure that the Handheld Terminal is turned off. If the power is on, press and hold the power button to turn off. 2. Slide the battery latch to the left slightly, and then lift the battery pack cover up. 3. Grasp the battery and lift by pulling up the battery pack removal tape gently. Charging battery To charge the battery 10 Single-slot charge cradle 1. Connect the charger to the charging slot (as below). 2. Put DT430 terminal and / or spare battery into the charger cradle. 3. Plug the charger to the main electrical outlet. 4. The “Be be” sound rings and the LED light turns amber. 5. When charging is complete, the LED light turns green. Cascade Charge Cradle 1. Connect 2 or 3 (max) charge cradles through charge cable as showed. It may cause DT430 damage if over 3 charge cradles are connected. 2. Put DT430 terminal and / or spare battery into the charger cradle. 3. Plug the charger to the main electrical outlet. 4. The LED light turns amber. LED light descr…

Text truncated - open the document above for the full version.

Federal Communication Commission Equipment Authorization Division, Application Processing Branch, 7435 Oakland Mills Road, Columbia, MD 21046, USA. 22 Nov 2010 TO WHOM IT MAY CONCERN Pursuant to Paragraphs $0.457 and 0.459 at the Commission's Rules (47 C.F.R.) and Section $552(b)(4) of the Freedom of Information Act. Group Sense Mobile-Tech Limited requests confidentiality for the following products: FCC ID Number Produc t Title / Model VRI – B134 Title: PDA with WiFi 802.11b/g Model: DT430 and X-430 For the product stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Technical Description Required for section 2.1003 - Operational Description No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Group Sense Mobile-Tech Limited trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Jackie Wong Technical Manager R&D Electronic Section

Construction Equality Declaration We, the undersigned hereby declare, that the following radio equipment: Group Sense Mobile-Tech Limited Product name: PDA with WiFi 802.11b/g Model No: X-430 (Name of product,company, type or model, brandname whichever is applicable) is electrically equivalent to: Group Sense Mobile-Tech Limited Product name: PDA with WiFi 802.11b/g Model No: DT430 (Name of product, company, type or model, brandname whichever is applicable) − Point of contact: Group Sense Mobile-Tech Limited (Company name) 6 th Floor, Enterprise Place, Hong Kong Science Park, Shatin, Hong Kong (Company address) Jackie Wong (Name, telephone and fax number) 6 th Floor, Enterprise Place, Hong Kong Science Park, Shatin, Hong Kong (Place, date of issue) (Signature / stamp) Nov 22, 2010 Jackie Wong, Technical Manager (Name and title in block letters)

Outside View

Label Location

42.50 28.00 4.00 4.00 R 1.00 Update date: 2010/08/30 Marerial : Raflatac PET film with adhesive 16-: 1:( . . 0= '-, 1=) 2-8:7-( . . 0000021) 9-10:( . .28 = 01,35=02, 350 = 03 ) 11-14: 106 15:( . .= 0,= 1,) 16:( . .: 0 = 300, 1= 400,) ,/350,, 0000000103 10601 digit serial number DigitCountry version e gInt l or other non China versionCN ver Digitdigital incremental number for the units e g DigitProduct model e g WFWFDT DigitB DigitWinCE version e g WinCE professionalWin CE coreothersreserved DigitHardware version e g SamsungMHzMHz other reserved Therefore the S N of DTwill be let sayB P/N: 80-B134-001101 Size: 42.5*28.0-C4.0-3R1.0+0.00/-0.20mm S/N: 0100000103B13401 S/N label for gift box P/N: 80-B134-002101 !"#50 15+/-0.5 $%#&'()*。 ,-./*。 mmX mm-4R1.25mm Model no.:DT430 Marerial : Raflatac PET film with adhesive P/N: 80-B134-001101 Size: 42.5*28.0-C4.0-3R1.0+0.00/-0.20mm S/N: 0100000103B13401 10 Rechargeable Li-Ion battery DT430 Rating: 3.7V 1880mAh FCC ID: VRI-B134 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: 0100000103B13401 10 Rechargeable Li-Ion battery X-430 Rating: 3.7V 1880mAh FCC ID: VRI-B134 S/N: 0100000103B13401 Model no.:X-430

Antenna

ISO/IEC17025Accredited Lab. Report No: FCC/IC 1009244-02 File reference No: 2010-12-16 Applicant: Group Sense Mobile-Tech Limited Product: PDA with WiFi 802.11b/g Model No: DT430 Trademark: Xplore Test Standards: FCC Part 15 Subpart C, Paragraph 15.247 and FCC Part 15 Subpart B Test result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4&FCC Part 15 Subpart C, Paragraph 15.247 regulations and RSS-210 for the evaluation of electromagnetic compatibility Approved By Jack Chung Manager Dated: Dec. 16.2010 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TECHNOLOGY CONSULTING CO LTD 5/F,Block 4, Anhua Industrial Zone.,No.8 TaiRan Rd.CheGongMiao,FuTian District, Shenzhen,CHINA. Tel (755) 83448688 Fax (755) 83442996 Report No: 1009244-02 Page 2 of 59 Date: 2010-12-16 TEST REPORT The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shenzhen Timeway Technology Consulting Co .,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen Timeway Technology Consulting co .,Ltd to his customer. Supplier or others persons directly concerned. Shenzhen Timeway Technology Consulting co .,Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen Timeway Technology Consulting co .,Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement： The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19. The testing quality system of our laboratory meets with ISO/IEC-17025 requirements, which is approved by CNAS. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: CNAS-LAB Code: L2292 The EMC Laboratory has been assessed and in compliance with CNAS-CL01 accreditation criteria for testing Laboratories (identical to ISO/IEC 17025:1999 General Requirements) for the Competence of testing Laboratories. FCC-Registration No.: 899988 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.:899988. IC- Registration No.: IC5205A-02 The EMC Laboratory has been registered and fully described in a report filed with the (IC) Industry Canada. The acceptance letter from the IC is maintained in our files. Registration No.: IC 5205A-01. Report No: 1009244-02 Page 3 of 59 Date: 2010-12-16 TEST REPORT The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shenzhen Timeway Technology Consulting Co .,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen Timeway Technology Consulting co .,Ltd to his customer. Supplier or others persons directly concerned. Shenzhen Timeway Technology Consulting co .,Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen Timeway Technology Consulting co .,Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 3 1.1 Test Lab Details................................................................................................ 3 1.2 Applicant Details.............................................................................................. 3 1.3 Description of EUT .......................................................................................... 3 1.4 Submitted Sample............................................................................................. 3 1.5 Test Duration.................................................................................................... 4 1.6 Test Uncertainty.................................................................................................4 1.7 Test By.......................................................................................................... 4 2.0 List of Measurement Equipment......................................................................... 4 3.0 Technical Details............................................................................................. 7 3.1 Summary of Test Results..................................................................................... 7 3.2 Test Standards.................................................................................................. 7 4.0 EUT Modification............................................................................................. 7 5.0 Power Line Conducted Emission Test...................................................................... 8 5.1 Schematics of the Test........................................................................................ 8 5.2 Test Method and Test Procedure............................................................................ 8 5.3 Configuration of the EUT.................................................................................... 8 5.4 EUT Operat…

Text truncated - open the document above for the full version.

Conducted Emissions Radiated Emissions