VSFCT8X2Cedar CT8X2

1 User Manual User Guide CT8X2 Preface Thank you for choosing CT8X2 tablet! CT8X2 is an Android intelligent tablet, it has the ultra-thin fashion appearance, it supports application software installation and unloading from Android electronic market, WLAN network connection, touch capacitive screen, high-pixels cameras, high-quality audio and ultra HD video, etc. These will lead you into an entirely new and fascinating mobile internet world. This manual systematically introduces many functions of CT8X2 tablet, tips and notes. Please carefully read it before using CT8X2. The illustrations in this manual are only for reference, and their functions are based on the real product. The company reserves the right of final interpretation. 2 Basic Information 1. Safety Notice If your phone is lost or stolen, please immediately inform the telecom department or commission agents of forbidding the use of SIM card, so that avoid the economic loss caused by false calling of others. When you contact with telecom department or commission agents, they need to know your phone IMEI number (printed on the label on the back of the phone and can be found after taking down the battery). Please copy the number and keep it safe for future use. In order to use the phone more safely, please adopt preventive measures, for example: set up the PIN code of SIM card, PIN code can prevent your SIM card from being used by others without permission. When leaving the car, please don’t place the phone in a place easy to be seen, you had better to carry with you or lock in the suitcase. 2. Safety Alert and Cautions Before using the phone, please read these cautions carefully so that make sure to use the phone correctly. 3.1 General Cautions On the plane, in the hospital and other places that forbidden to use the tablet, please turn off the phone; otherwise it may affect the normal operation of electronic equipments and medical instruments. Please comply with the relevant regulations if using the phone in these places, Please strictly comply with the laws and regulations about the phone use in the driving place. If you use the phone while you are driving, please comply with the following rules: concentrate on driving, pay attention to the road conditions; if the phone has hands-free function, please make a phone call hands-free; if the driving conditions are not good, please stop the car, and then dial or receive a call. When approaching the places that storing fuel, chemicals or explosives, and etc., please comply with the laws, regulations and the relevant signs. Please place the phone, battery and charger in the place out of children’s reach, for fear that the children use them as tools and cause personal injury. Your phone only can use the batteries, chargers and other accessories specified by the company for fear that the phone is damaged. If using other batteries and chargers, it may cause liquid leaking, overheat, explosion, fire breakout and other failures of batteries. Please don’t use the phone close to weak signal or high precision electronic equipments. Wireless wave interference may cause the mis-operation of these electronic equipments. The phone has the function of timely auto power-on, please check the auto power-on and shut down settings of the phone, so that confirm that the phone will not power on automatically during the flight. Please don’t strike, shake or sling the phone violently for fear that the phone is failed or fire breakout. Please don’t place the battery, the phone and the charger in the micro-wave oven or high-voltage equipment; otherwise may cause circuit damage or fire breakout and other accidents. Please don’t use the phone in the places with inflammable and explosive gas; otherwise may cause phone failure or fire hazard. 3 Please don’t place the phone in the places with high temperature, high humidity or a large amount of dust; otherwise it may cause phone failure. Please don’t place the phone in the uneven or unstable place, prevent the phone from falling off and then cause failure or damage. Please only use the original antenna or the antenna being approved by the company. Unapproved and modified antenna or the antenna with additional accessories may damage the phone. Please don’t touch the antenna during a call. Touching the antenna may affect the call quality and make the phone power higher than the required power in normal use. In addition, using the unapproved antenna may violate the regulations in your country. 3.2 Cautions of Using the Phone Don’t take down or modify the phone; otherwise it may cause the damage, leakage and circuit failure of the phone. Please don’t knock the LCD by force or use the LCD to knock other things; otherwise may cause the damage of liquid crystal plate and the leaking of liquid crystal. If liquid crystal enters the eyes, it may damage eyesight. At this time, please rinse the eyes immediately with clean water (don’t rub the eyes), and see a doctor immediately. In very rare cases, if the phone is used in some types of vehicles, it may have bad effect on the electronic equipments in the vehicle. At this time, please don’t use the phone for fear of losing the safety guarantee. If your vehicle is equipped with the air bag, please don’t place the phone above the air bag or the area that can be touched after the air bag is swelled, for fear that the phone is applied very strong external force and cause serious damage on the vehicle owner when the air bag is swelled. Please don’t touch the key-stoke using needles, pen nibs and other sharp objects; otherwise it may damage the phone or cause mis-operation. If the antenna is damaged, please don’t use the phone; otherwise it may cause the personal injury. Don’t make the phone approach to the magnetic card and other magnetic objects too closely; radiation wave of the phone may clean out the information stored in the floppy disks, stored value cards and credit cards. Please place the drawing pin and other small metal ob…

Text truncated - open the document above for the full version.

Company: Juniper Systems, Inc. Add: 1132 W 1700 N Logan, Utah ,84321 United States Tel: 435-753-1881 Fax: 435-774-8990 E-mail: [email protected] Attestation Letter Please contact me if there is need for any additional clarification or information. Best Regards, Sincerely Yours, Date: 2020-08-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Di vision 7435 Oakland Mills Road Columbia, MD 21046 The chip WCN3680B installed in our product Cedar CT8X2(model na me: CT8X2, FCC ID: VSFCT8X2), which support 5G Wi-Fi Band1(5150-5250MHz), Band2(5250-5350MHz), Band3(5470-5725MHz), Band4(5725-5850MHz). But for this product, it only activates Band1 and Band4, the other bands are disabled by using the software. For 2G/3G/4G, The chip WTR2965 can support GSM/WCDMA/CDMA/LTE, but the product only activates GSM/GPRS/EGPRS 850/1900, WCDMA Band 2/5, LTE Band 2/4/5/7/17/41, the other bands are disabled by using the software. Signature: Typed or Printed Name: Gary D Spence Title: Chief Technology Officer

Company: Juniper Systems, Inc. Add: 1132 W 1700 N Logan, Utah ,84321 United States Tel: 435-753-1881 Fax: 435-774-8990 E-mail: [email protected] FCC Confidential Authorization Date:2020-08-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization an d Evaluation Division 7435 Oakland Mill s Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: VSFCT8X2 To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Juniper Systems, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Sch ematics Operation Description BOM Tune-up U-NII Device Security Declaratio n The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Typed or Printed Name: Gary D Spence Title: Chief Techno logy Officer

EXHIBIT A- EUT EXTERNAL PHOTOGRAPHS

Cedar CT8X2 Model: CT8X2 CE芘：三 IN PUT:SVDC=-=--=2.0A FCC ID:VSFCT8X2 Juniper Systems, Inc. 1132 W 1700 N Logan, Utah,84321 United States

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS NFC Antenna Wi-Fi/BT Antenna GSM/WCDMA/LTE Main Antenna GPS Antenna GSM/WCDMA/LTE Diversity Antenna

SAR EVALUATION REPORT For Juniper Systems, Inc. 1132 W 1700 N Logan, Utah ,84321 United States FCC ID: VSFCT8X2 Report Type: Original Report Product Type: Cedar CT8X2 Project Engineer: Bard Liu Re port Number: RSHD200817003-20B Re port Date: 2021-04-02 Reviewed By: Oscar Ye EMC Mana ger Test Laboratory: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road,Kunshan,Jiangsu province,China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan ) Report No.: RSHD200817003-20B SAR Evaluation Report 2 of 83 Attestation of Test Results EUT Information EUT Description Cedar CT8X2 Tested Model CT8X2 FCC ID VSFCT8X2 Serial Number RSHD200817003 Test Date 2021-02-21~ 2021-02-26 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) Body supported Mode GSM 850 0.24 W/kg 1g SAR 1.6 PCS 1900 0.20 W/kg 1g SAR WCDMA 2 0.49 W/kg 1g SAR WCDMA 5 0.21 W/kg 1g SAR LTE Band 2 0.45 W/kg 1g SAR LTE Band 4 0.69 W/kg 1g SAR LTE Band 5 0.28 W/kg 1g SAR LTE Band 7 0.31 W/kg 1g SAR LTE Band 17 0.14 W/kg 1g SAR LTE Band 41 0.24 W/kg 1g SAR 2.4GHz WLAN 0.82 W/kg 1g SAR 5.2GHz WLAN 0.71 W/kg 1g SAR 5.8GHz WLAN 0.55 W/kg 1g SAR Hotspot 1.51 W/kg 1g SAR Simultaneous 1.51 W/kg 1g SAR Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Kunshan ) Report No.: RSHD200817003-20B SAR Evaluation Report 3 of 83 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 6 SAR LIMITS ................................................................................................................................................................. 6 FACILITIES .................................................................................................................................................................. 7 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 8 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 16 LIQUID VERIFICATION ............................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 18 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 19 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 27 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 27 CHEEK/TOUCH POSITION ........................................................................................................................................... 28 EAR/TILT POSITION ................................................................................................................................................... 28 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 29 TEST DISTANCE FOR SAR EVALUATION .................................................................................................................... 29 SAR EVALUATION PROCEDURE .…

Text truncated - open the document above for the full version.

Liquid depth ≥ 15cm Test Photo Body-Bac k Body-Fr o nt Body-Left Body-Rig ht Body-Top Body-Bottom

FCC PART 27 FCC PART 22H, PART 24E TEST REPORT For Juniper Systems, Inc. 1132 W 1700 N, Logan, Utah 84321, United States FCC ID: VSFCT8X2 Report Type: Original Report Product Type: Cedar CT8X2 Test Engineer: Jack Jiao Re port Number: RSHD200817003-00E Re port Date: 2021-04-26 Reviewed B y: Oscar Ye EMC Manager Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 2 of 467 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 JUSTIFICATION ............................................................................................................................................................. 6 CHANNEL LIST ............................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 8 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 8 EXTERNAL I/O CABLE .................................................................................................................................................. 8 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 9 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 TEST EQUIPMENT LIST ......................................................................................................................................... 11 FCC §1.1307(B) & §2.1093 - RF EXPOSURE INFORMATION ............................................................................ 13 TEST RESULT ............................................................................................................................................................. 13 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................ 14 FCC §2.1046; § 22.913 (A); § 24.232 (C); §27.50 (C) (D) (H) (2)- RF OUTPUT POWER .................................... 15 APPLICABLE STANDARDS........................................................................................................................................... 15 TEST PROCEDURE ...................................................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 16 FCC §2.1049, §22.917, §22.905 & §24.238; §27.53 - OCCUPIED BANDWIDTH ................................................. 63 APPLICABLE STANDARDS........................................................................................................................................... 63 TEST PROCEDURE ...................................................................................................................................................... 63 TEST DATA ................................................................................................................................................................ 63 FCC § 2.1051; § 22.917 (A); § 24.238 (A); §27.53(M) (H)- SPURIOUS EMISSIONS AT ANTENNA TERMINALS ............................................................................................................................................................. 174 APPLICABLE STANDARDS......................................................................................................................................... 174 TEST PROCEDURE .................................................................................................................................................... 174 TEST DATA .............................................................................................................................................................. 174 FCC § 2.1053; § 22.917 (A); § 24.238 (A); §27.53 (H) (M) - SPURIOUS RADIATED EMISSIONS ................. 373 APPLICABLE STANDARDS......................................................................................................................................... 373 TEST PROCEDURE ......................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 303 of 467 30 MHz - 1 GHz (QPSK, 10.0 MHz, Middle Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -39.22 dBm 914.46893788 MHz 1 [T1] -39.22 dBm 914.46893788 MHz D1 -13 dBm Date: 26.OCT.2020 12:26:33 1 GHz – 10 GHz (QPSK, 10.0 MHz, Middle Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -22.98 dBm 3.34468938 GHz 1 [T1] -22.98 dBm 3.34468938 GHz D1 -13 dBm Date: 26.OCT.2020 14:11:11 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 304 of 467 30 MHz - 1 GHz (16QAM, 10.0 MHz, Middle Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -38.84 dBm 986.39278557 MHz 1 [T1] -38.84 dBm 986.39278557 MHz D1 -13 dBm Date: 26.OCT.2020 12:27:39 1 GHz – 10 GHz (16QAM, 10.0 MHz, Middle Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -23.58 dBm 3.32665331 GHz 1 [T1] -23.58 dBm 3.32665331 GHz D1 -13 dBm Date: 26.OCT.2020 14:10:35 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 305 of 467 30 MHz - 1 GHz (QPSK, 1.4 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -35.53 dBm 828.93787575 MHz 1 [T1] -35.53 dBm 828.93787575 MHz D1 -13 dBm Date: 26.OCT.2020 13:11:13 1 GHz – 10 GHz (QPSK, 1.4 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -16.94 dBm 3.38076152 GHz 1 [T1] -16.94 dBm 3.38076152 GHz D1 -13 dBm Date: 26.OCT.2020 13:54:47 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 306 of 467 30 MHz - 1 GHz (16QAM, 1.4 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -32.31 dBm 830.88176353 MHz 1 [T1] -32.31 dBm 830.88176353 MHz D1 -13 dBm Date: 26.OCT.2020 13:09:40 1 GHz – 10 GHz (16QAM, 1.4 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -17.15 dBm 3.38076152 GHz 1 [T1] -17.15 dBm 3.38076152 GHz D1 -13 dBm Date: 26.OCT.2020 13:54:04 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 307 of 467 30 MHz - 1 GHz (QPSK, 3.0 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -34.14 dBm 828.93787575 MHz 1 [T1] -34.14 dBm 828.93787575 MHz D1 -13 dBm Date: 26.OCT.2020 13:37:55 1 GHz – 10 GHz (QPSK, 3.0 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -21.35 dBm 3.38076152 GHz 1 [T1] -21.35 dBm 3.38076152 GHz D1 -13 dBm Date: 26.OCT.2020 13:51:27 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 308 of 467 30 MHz - 1 GHz (16QAM, 3.0 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -36.76 dBm 828.93787575 MHz 1 [T1] -36.76 dBm 828.93787575 MHz D1 -13 dBm Date: 26.OCT.2020 13:37:02 1 GHz – 10 GHz (16QAM, 3.0 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -20.95 dBm 3.38076152 GHz 1 [T1] -20.95 dBm 3.38076152 GHz D1 -13 dBm Date: 26.OCT.2020 13:50:47 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 309 of 467 30 MHz - 1 GHz (QPSK, 5.0 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kHz VBW 300 kHz SWT 245 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 30 MHzStop 1 GHz97 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -38.32 dBm 826.99398798 MHz 1 [T1] -38.32 dBm 826.99398798 MHz D1 -13 dBm Date: 26.OCT.2020 13:41:59 1 GHz – 10 GHz (QPSK, 5.0MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 1 MHz VBW 3 MHz SWT 52 ms RF Att 40 dB 7 dB Offset A IN1 1MA Unit dBm Start 1 GHzStop 10 GHz900 MHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -21.76 dBm 3.38076152 GHz 1 [T1] -21.76 dBm 3.38076152 GHz D1 -13 dBm Date: 26.OCT.2020 13:49:36 Fundamental Bay Area Compliance Laboratories Corp.(Kunshan) Report No.: RSHD200817003-00E FCC Part 27, FCC Part 22H/24E Page 310 of 467 30 MHz - 1 GHz (16QAM, 5.0 MHz, High Channel) 1MAX Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 100 kH…

Text truncated - open the document above for the full version.