
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Micro Wireless Electricity Monitor 1 TABLE OF CONTENTS TABLE OF CONTENTS .........................................................................................................................................................................................1 GENERAL SAFETY & CARE GUIDELINES ....................................................................................................................................................... 2 HOW THE MICRO WORKS ......................................................................................................................................................................4 Overview .......................................................................................................................................................................................................4 Household Power Cables And Phase .........................................................................................................................................................4 Accuracy...........................................................................................................................................................................................4 DISPLAY FEATURES ...........................................................................................................................................................................................5 Display Key Functions ..................................................................................................................................................................................5 TRANSMITTER FEATURES .................................................................................................................................................................................6 Transmitter Key Functions ..........................................................................................................................................................................6 GETTING STARTED ..............................................................................................................................................................................................7 What’s in the box ..........................................................................................................................................................................................7 Synchronising the Display and Transmitter ................................................................................................................................................7 Connecting the Sensor .................................................................................................................................................................................8 SWITCHING BETWEEN DISPLAY MODES .........................................................................................................................................................9 SETTING THE COST ........................................................................................................................................................................................... 9 PLACE DISPLAY INTO POWER SAVE MODE ................................................................................................................................................ 10 RESET ACCUMULATED VALUES ...................................................................................................................................................................... 10 LOW BATTERY WARNING ..................................................................................................................................................................................11 HINTS, TIPS & TROUBLESHOOTING ......................................................................................................... ....................................................... 12 SPECIFICATIONS.............................................................................................................................. .......................................................12 COMPLIANCE .....................................................................................................................................................................................................13 WARRANTY ......................................................................................................................................................................................................... 14 Limited One Year Warranty ..........................................................................................................................................................................14 Warranty Conditions ...................................................................................................................................................................................14 RETURNS PROCESS ........................................................................................................................................................................................14 U S UK GENERAL SAFETY & CARE GUIDELINES To ensure that you use your product safely and correctly please read the Warnings & Safety Precautions, Caring for Your Product and the User Manual sections before using this Micro Wireless Electricity Monitor. WARNINGS-Please observe the following warning & safety precaution guidelines when setting up and using this product. • This product uses Type C current sensor, do not apply around or remove from HAZARDOUS LIVE conductors. • When fitting the sensor if in any doubt always contact a qualified electrician. • Do not immerse the unit in water or other liquids. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not use this product where the use of radio frequency products can cause m…
Text truncated - open the document above for the full version.
433MHz RF Block Amplifying Mixer Impedance Matching circuit L15, C29, L16, C34, C35 Data Q1 XT1 433.92MHz Clock 433.92MHz Antenna FCC ID: VVZ-CMR130A IC: 7498A-CMR130A
Intertek Testing Services Job Number: HK09090571-2 External Photo Model: CMR130A (Internal) External Photo Page 1 of 1
MODEL: CMR130A TITLE: COLOR SP. VERSION: REV.: 0 DATE: 24-Sep-2009 REMARK: PAGE 1 OF 1 PREPARED BY: QJWU FILE: APPROVED BY: PMGT MKTR CU DATE: RED LED TEXTURE AREA: HIGH GLOSSY FRONT CAB: -INJ. COLOR: WHITE COLOR(CW-01) -SPRAY COLOR : NIL -TEXTURE: HIGH GLOSSY/ YS20002C REAR CAB, BATTERY DOOR: -INJ. COLOR: WHITE COLOR(CW-01) -SPRAY COLOR : NIL -S/S COLOR: PMS431C -TEXTURE: YS20002C EMBOSSED GRAPHIC AND TEXT LOGO S/S GREY PMS431C & GREEN PMS 390C IC: 7498A-CMR130A IC: 7498A-CMR130A BOTTOM VIEW TOP VIEW FRONT CAFB / 270110338-11001-10 REAR CAB / 270100239-1100X-10 BATTERY DOOR / 270100241-11002-10
Intertek Testing Services Job Number: HK09090571-2 Internal Photo Model: CMR130A (Internal) Internal Photo Page 1 of 6 Intertek Testing Services Job Number: HK09090571-2 Internal Photo Model: CMR130A (Internal) Internal Photo Page 2 of 6 Intertek Testing Services Job Number: HK09090571-2 Internal Photo Model: CMR130A (Internal) Internal Photo Page 3 of 6 Intertek Testing Services Job Number: HK09090571-2 Internal Photo Model: CMR130A (Internal) Internal Photo Page 4 of 6 Intertek Testing Services Job Number: HK09090571-2 Internal Photo Model: CMR130A (Internal) Internal Photo Page 5 of 6 Intertek Testing Services Job Number: HK09090571-2 Internal Photo Model: CMR130A (Internal) Internal Photo Page 6 of 6
Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue Street, Hunghom, Kowloon, Hong Kong. Tel (852) 2764 7873 Fax (852) 2765 6620 Email: [email protected] Web Site: http://www.idthk.com Technical description of CMR130A CMR130A is a Wireless Electricity Monitor sensor and transmit data by using 433.92MHz . After every time of data measurement. The data will be transfer to the receiver unit through 433.92MHz. It composes a controller part and a transmitter part. The transmitter is basically a Colippttis oscillator, where C13, C18 and XT1 are used to determinate the resonant frequency that is 433.92MHz. Transistor Q501 whose f T is greater than 6GHz, provides a good frequency response to the circuit. There is a LC filtering circuitry, L1 and C31, that is used to suppress harmonics of the oscillator. Capacitances C35 is employed to match the impedance of the antenna. Antenna Used Internal Integral Antenna
Intertek Testing Services Report Number: HK09090571-2 FCC ID: VVZ-CMR130A IC: 7498A-CMR130A Page 1of 3 Bandwidth Plot: Bandwidth Limit: 433.92 MHz x 0.25% = 1.085 MHz Measured Bandwidth: 0.420 MHz Complied
- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: HK09090571-2 2 Save Energy Ltd. Application For Certification (Original Grant) (FCC ID: VVZ-CMR130A) (IC: 7498A-CMR130A) Transmitter Prepared and Checked by: Approved by: Norton Yuen/sl Lead Engineer Ho Wai Kin, Ben Senior Supervisor Date: December 08, 2009 INTERTEK TESTING SERVICES Report No.: HK09090571-2 FCC ID: VVZ-CMR130A IC: 7498A-CMR130A i GENERAL INFORMATION 2 Save Energy Ltd. BRAND NAME: OWL, MODEL: CMR130A FCC ID: VVZ-CMR130A IC: 7498A-CMR130A Grantee: 2 Save Energy Ltd. Grantee Address: 72/73 BARTHOLEMEW STREET NEWBURY BERKS, RG14 5DU United Kingdom Contact Person: Marc Bowden Tel: 44 (0) 01256 383433 Fax: 44 (0) 01256 321254 e-mail: [email protected] Manufacturer: IDT Technology Limited Manufacturer Address: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue Street, Hunghom, Kowloon, Hong Kong Brand Name: OWL Model: CMR130A Type of EUT: Transmitter Description of EUT: Wireless Energy Monitor (Transmitter) Serial Number: N/A FCC ID / IC: VVZ-CMR130A / 7498A-CMR130A Date of Sample Submitted: September 14, 2009 Date of Test: November 18, 2009 Report No.: HK09090571-2 Report Date: December 08, 2009 Environmental Conidtions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: HK09090571-2 FCC ID: VVZ-CMR130A IC: 7498A-CMR130A ii SUMMARY OF TEST RESULT 2 Save Energy Ltd. BRAND NAME: OWL, MODEL: CMR130A FCC ID: VVZ-CMR130A IC: 7498A-CMR130A TEST SPECIFICATION REFERENCE RESULTS Maximum Peak Output Power 15.247(b), (c) / RSS-210 A8.4 N/A Hopping Channel Carrier Frequencies Separation 15.247(e) / RSS-210 A8.1 (for 2.4GHz Digital) N/A 20dB Bandwidth of the Hopping Channel 15.247(a) / RSS-210 A8.1 N/A Number of Hopping Frequencies 15.247(e) / RSS-210 A8.1 N/A Average Time of Occupancy of Hopping Frequency 15.247(e) / RSS-210 A8.1 N/A Antenna Conducted Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A Radiated Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A RF Exposure Compliance 15.247(i) / RSS-Gen 5.5 N/A Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.2 N/A Transmitter Field Strength (for 27MHz) 15.227 / RSS-310 3.8 N/A Transmitter Field Strength (for 40MHz) 15.229 / RSS-210 A2.7 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(a) / RSS-210 A1.1.1 (for Remote Control) N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(e) / RSS-210 A1.1.5 (for 433MHz) Pass Transmitter Field Strength and Bandwidth Requirement 15.239 / RSS-210 A2.8 (for 88-108MHz) N/A Transmitter Field Strength and Bandwidth Requirement 15.249 / RSS-210 A2.9 (for 902-928MHz or 2.4GHz) N/A Transmitter Field Strength and Bandwidth Requirement 15.235 / RSS-310 3.9 (for 49MHz) N/A Receiver / Digital Device Radiated Emissions 15.109 / ICES-003 N/A Digital Device Conducted Emissions 15.107 / ICES-003 N/A Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: HK09090571-2 FCC ID: VVZ-CMR130A IC: 7498A-CMR130A iii Table of Contents 1.0 General Description........................................................................................ 1 1.1 Product Description ........................................................................................... 1 1.2 Related Submittal(s) Grants............................................................................... 1 1.3 Test Methodology.............................................................................................. 1 1.4 Test Facility ....................................................................................................... 1 2.0 System Test Configuration ............................................................................. 2 2.1 Justification ....................................................................................................... 2 2.2 EUT Exercising Software................................................................................... 2 2.3 Special Accessories .......................................................................................... 2 2.4 Equipment Modification ..................................................................................... 2 2.5 Measurement Uncertainty.................................................................................. 2 2.6 Support Equipment …
Text truncated - open the document above for the full version.
Intertek Testing Services Report Number: HK09090571-2 Periodic Operation: 15.231(e) Timing Request: Transmission interval: 60.445 seconds per transmission interval 30 Times transmitter duration 30 x 0.0703 =2.109 seconds Requirement: Transmission interval >10 seconds and 30 times of the duration Complied FCC ID: VVZ-CMR130A IC: 7498A-CMR130A Page 2of 3 Intertek Testing Services Report Number: HK09090571-2 Timing and Average Factor AF Calculation: No. of “Short” bit: 42 No. of “Long” bit: 15 Duration of “Short” bit: 480μS Duration of “Long” bit 940μS Time per transmission: 70.3ms Duty Cycle: 48734.0 10003.70 4804294015 = × ×+× Average Factor: )(2433.6 48734.0log20 dB−= ×= FCC ID: VVZ-CMR130A IC: 7498A-CMR130A Page 3of 3
Intertek Testing Services Job Number: HK09090571-2 Configuration Photo Page 1 of 2 Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: CMR130A Intertek Testing Services Job Number: HK09090571-2 Configuration Photo Page 2 of 2 Configuration Photographs Worst-Case Radiated Emissions (Rare View) Model: CMR130A
2/F Garment Centre · Kowloon · Hong Kong
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231(e) | 433.92 MHz - 433.92 MHz | - |

Wireless Electricity Monitor (433.92MHz Tx)
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter