VW3DCIW377DSet top Box

SAFETY, CERTIFICATIONS AND LICENSES IMPORTANT INFORMATION ABOUT THE DCIW377 DISH: INSTALLATION AND SAFE USAGE INSTRUCTIONS 1. Place the product on a flat surface. 2. Connect the manufacturer supplied AC power adapter. The DCIW377 DISH requires the use of a 12 VDC, 1A power adapter in compliance with PS2 or LPS according to annex Q of UL 62368-1. Only use a manufacturer supplied and approved power adapter. Always first plug the adapter lead into the DCIW377 DISH, then the AC adapter into the AC wall socket. If you do not follow this sequence for set-up, you may get an electric shock. 3. Connect the power adapter to the AC outlet in accordance with the markings on the identification label (voltage, current, and frequency of electricity network). 4. Optionally, connect the Ethernet cable to the RJ45/Ethernet ports. Then connect the other end of the Ethernet Cable to the Ethernet port of your internet service device. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following: 1. Do not use this product near water and avoid contact with moisture. For example, do not use it near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that liquids are not spilled on this equipment. 2. This equipment is for indoor use only, do not place or install it in an outdoor location. 3. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock. 4. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat- producing appliances and equipment. 5. Care should be taken to ensure that the power cord is routed so it is not likely to be walked on or pinched by items placed upon or next to it. 6. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning only. 7. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this equipment. If service is required, disconnect all power from the equipment and consult qualified service personnel. 8. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. 9. Make sure the power socket to which you connect the power cord is easily accessible and as close as possible to the equipment so that the appliance can be unplugged quickly in case of a problem. 10. When applicable , the coaxial connector is intended to be imperatively connected, either to an antenna or an indoor antenna outlet fully galvanically isolated (core and shielding) at 1.5 kV ~ at least, or to an antenna or an antenna outlet whose shielding of the coaxial cable is earthed, in accordance with 6.2 g) and 6.2 l) of standard EN / IEC 60728 11 dealing the safety of cable distribution networks, and according the national installation rules. RADIO FREQUENCY INTERFERENCE STATEMENT Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FCC RADIO FREQUENCY RADIATION EXPOSURE STATEMENT This equipment complies with “FCC1.1310 for radio frequency radiation exposure limits set forth for an uncontrolled environment”. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device produces radio frequency energy in the 2.4 GHz and 5 GHz spectrum. The antenna should be positioned to keep a minimum distance of 30cm (0.98ft) from the radiating element to any nearby person. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS FCC ID: VW3DCIW377D This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. MODIFICATIONS You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Responsible Party: Sagemcom USA 14651 N. Dallas Parkway Suite 900 Dallas, TX 75254 Phone: 972-674-4100 Model Name: DCIW377 DISH Product Name: DCIW377 DISH LICENSES AND TRADEMARKS The terms HDMI, HDMI High-Definition Multimedia Interface and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Atmos and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Wi-Fi ® and Wi-Fi logo are registered trademark of Wi-Fi Alliance. Bluetooth ® is a registered trademark of Bluetooth SIG, Inc. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, con…

Text truncated - open the document above for the full version.

2 AB DOCUMENT SAGEM COMMUNICA TIONS REPRODUCTION INTERDITESAL L RIGHTS RESER VED REPRODUCTIONAND DISCLOSURE PROHIBED DESCRIPTION: FR : R46 000 01 3000518532 Etiq constructeur DCIW377 DISH 13/11/23 F. WAIRY - FEUILLE / SHEET R.FAB / P.N. 254069883 1/1 EN : Manufacturer sticker DCIW377 DISH 22/11/23 J. BRIAND Fabriqué suivant étiquette vierge 253884145 (80x50mm) Manufactured according to the virgin label 253884145 (80x50mm) Contraintes du logo Sagemcom voir Spec. 3000474978 R18 000 xx « NOTA : Réfé rence : Norme EN IEC 62368-1 article F.3.10 Les marquages doivent rester vi sibles, lisibles et indél ébiles après fr ottement à la main pendant 15 s avec un chiffon imbibé d'eau, et pendant 15 s avec un chiffon imbibé d'es sence minér ale (n-hexane). Après apposition sur le produit, après les tests ci-des sus, l’étiquette ne doit pas se corner et ne doit pas être détachable à la main. NOTA : Refe rence : Standard EN IEC 62368-1 clause F.3.10 Markings shall remain vi sible, legible and indelible after rubbing by hand fo r 15 s with a piec e of cloth soaked with water and fo r 15 s with a piece of cloth soaked with the petroleum spirit (n-hexane). After affixing on the product, after the above tests, label shall show no curling and shall not be removable by hand. ». Code Barre type 128 Code Barre type 128 Code Barre type 128 QR Code “Country Of Production” est un champ à renseigner par l’usine de production. is a field to be informed by the production plant “Country Of Production” DCIW377 DISH (254063985) DN017872 CS 39000 92271 BOIS-COLOMBES CEDEX FRANCE Tested To Comply With FCC Standards FCC ID : VW3DCIW377D I.T.E. E308616 Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Atmos and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. S/N: 123456789012 MAC: XX:XX:XX:XX:XX:XX DISH S/N: 123456789012345 Made in Country of Production

© cetecom advanced GmbH Page 1 of 3 RF Exposure Evaluation according to KDB 447498 D01 v06 Report identification number: 1-7077_23-01-07_TR1-R01_MPE_FCC Certification numbers and labeling requirements FCC ID VW3DCIW377D This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Eric Tuettmann Lab Manager Testing Manager Radio Labs Radio Labs Report no.: 1-7077_23-01-07_TR1-R01 © cetecom advanced GmbH Page 2 of 3 1. MPE at given distance (KDB 447498 D01 General RF Exposure Guidance v06) Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG / 4 π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna PG = Output Power including antenna gain The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) 2. EUT technologies Declared minimum safety distance: 20 cm f Min f Max # P ERP P EIRP P RF Exp S Result S Limit % Bluetooth Classic 24022480CN/A6.06.00.0011.000.08% Bluetooth LE 24022480DN/A7.07.00.0011.000.10% WLAN 2.4 GHz 24122462AN/A27.027.00.1001.009.97% WLAN 5 GHz 51805240BN/A27.027.00.1001.009.97% WLAN 5 GHz 52605320BN/A26.026.00.0791.007.92% WLAN 5 GHz 55005700BN/A26.026.00.0791.007.92% WLAN 5 GHz 57455825BN/A28.028.00.1261.0012.55% Output Power [dBm] SRD Technology Frequency [MHz] Reference Power Density [mW/cm²] Share of Limit Notes: - Max rated conducted output power taken from customer’s tune up info Referenced Documents: # Results from: A Test Report 1-7077_23-01-04_TR1_R1 B Test Report 1-7077_23-01-05_TR1_R1 C Test Report 1-7077_23-01-02_TR1-R1 D Test Report 1-7077_23-01-03_TR1-R1 Report no.: 1-7077_23-01-07_TR1-R01 © cetecom advanced GmbH Page 3 of 3 3. Collocation overview: Technology Share of Limit [%] Bluetooth Classic 0.08% Bluetooth LE 0.10% WLAN 2.4 GHz 9.97% WLAN 5 GHz 12.55% Sum 22.70% 4. Conclusion This prediction demonstrates the following: The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations. Conclusion: RF exposure evaluation is not required.

08/01/2024 DCIW377DISH Antennaspresentation 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A Antennas summary 2 Measurement data WiFiMeasurement dataBT Measurement data Return loss S11 < -12dBS11 < -12dB Isolation ◼between 2.4G < -25dB ◼between 5G <-25dB ◼between 2.4G < -20dB Peak Gain ◼2.4Gpeak gain combination : 2.5dBi ◼5G peak gain combination : 3dBi ◼Gain : 2.9dBi Antenna efficiency ◼2.4G antenna > 70%. ◼5G antenna>60 % ◼2.4G antenna > 75% Antennas Wireless Function ◼Wi-Fi 2.4G+5G MiMo2X2 ◼Bluetooth ◼Wi-Fi 2.4G and Bluetooth working simultaneously Antenna type ◼1x on-board PCB : 2.4G antenna ◼2x on-board PCB : 2.4G/5G Dual-band antenna 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A RF Front-end schematic 3 FEM RTC7658 FEM RTC7658 Diplexer Diplexer RF Switch RTC6603U RF Switch RTC6617U BCM72127 Chipset 2.4/5GHz WiFi Antenna0 2.4/5GHz WiFi Antenna1 TX_BT RX_BT TX5G_0 RX5G_0 TX5G_1 RX5G_1 TX2G_1 RX2G_1 TX2G_0 RX2G_0 2.4 BT Antenna RF Switch RTC6603U Low-pass filter 191646854 DUPLEXEUR.RF CMS DOUBLE BANDE 2.4/5GHZ quantity 2X 191656800 IC.CMS RTC7658 5G WIFI FEM quantity 2X 191699412 IC.CMS RTC6617U SP3T SWITCH QFN8 quantity 1X 191699441 IC.CMS RTC6603U SPDT.SWITCH SC-70 quantity 2X 191497397 FILTRE CMS LOW PASS FILTER MULTILAYER – DEA162690LT-5014A5 quantity 1X 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A Antenna placement & polarization There are 3 antennas : ▪Two Wi-Fi dual bands antennas 2.4GHz and 5GHz used simultaneously (MiMomode) => ANT0 & ANT1 ▪One Bluetooth antenna => ANT_BT 4 AntennasANT0ANT1ANT-BT Polarization (type)Horizontal (monopole) Horizontal (monopole) Horizontal (monopole) 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A Antenna placement & cable routing 5 ANT1 microstrip line Distances between antennas ANT0 / ANT190mm ANT0 / ANT-BT122mm ANT1 / ANT-BT85mm ANT_BT ANT1 ANT0 ANT0 coaxial cable 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A Antenna placement & cable routing 6 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A WiFiAntenna peak gains –ANT0 7 Frequency band ANT0 Gains (dBi) ISM -1.1 UNII-1/2A 0.3 UNII-2C/UNII-3 -0.5 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT0 -2450 MHz Radiation patterns 8 1D 2D OxOyOz 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT0 -5250 MHz Radiation patterns 9 1D 2D OxOyOz 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT0 -5550 MHz Radiation patterns 10 1D 2D OxOyOz 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A WiFiAntenna peak gains –ANT1 11 Frequency (MHz) ANT0 Gains (dBi) ISM 0.1 UNII-1/2A -0.3 UNII-2C/UNII-3 1.6 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT1 -2450 MHz Radiation patterns 12 1D 2D OxOyOz 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT1 -5250 MHz Radiation patterns 13 1D 2D OxOyOz 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT1 -5550 MHz Radiation patterns 14 1D 2D OxOyOz 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A WiFiAntenna peak gains –Combined gains 15 •Peak gains combination [ANT0;ANT1] Frequency (MHz) Correlated Gains (dBi) ISM band (2.4GHz) 2.5 UNII-1/2A (5150- 5350MHZ) 3 UNII-2C/UNII-3 (5470- 5850MHZ) 2 Correlated combination gain formula ➔Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20) 2 /NANT] dBi From KDB 662911 D01 Multiple Transmitter Output v02r01 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A Bluetooth Antenna peak gains –ANT-BT 16 Frequency (MHz) ANT0 Gains (dBi) ISM band (2.4GHz) 2.9 2 -Information interne Sagemcom -Interdiction de communiquer en externe sans autorisation de la direction concernée -Ce document et les informations qu’il contient sont la propriété de Sagemcom 31 003 697 -A ANT-BT -…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-7077_23-01-0 4_TR1_R1 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 SAGEMCOM BROADBAND SAS 4 rue des Messageries 92270 Bois-Colombes / FRANCE Phone: -/- Contact: Benjamin Murindangabo e-mail: benjamin.murindangabo- [email protected] Manufacturer SAGEMCOM BROADBAND SAS 4 rue des Messageries 92270 Bois-Colombes / FRANCE Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Set-top Box Model name: DCIW377 DISH FCC ID: VW3DCIW377D Frequency: 2400 MHz to 2483.5 MHz Technology tested: WLAN Antenna: two integrated antennas Power supply: 115 V AC by mains adapter Temperature range: 0°C to +40°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Marco Bertolino David Lang Supervisor Radio Services Lab Manager Radio Labs Radio Labs Test report no.: 1-7077_23-01-04_TR1_R1 © cetecom advanced GmbH Page 2 of 72 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information ................................................................................................................................... 4 2.1 Notes and disclaimer ...................................................................................................................... 4 2.2 Application details .......................................................................................................................... 4 2.3 Test laboratories sub-contracted .................................................................................................... 4 3 Test standard/s, references and accreditations ......................................................................................... 5 4 Reporting statements of conformity – decision rule .................................................................................. 6 5 Test environment ....................................................................................................................................... 6 6 Test item ................................................................................................................................................... 7 6.1 General description ......................................................................................................................... 7 6.2 Additional information .................................................................................................................... 7 7 Description of the test setup ...................................................................................................................... 8 7.1 Shielded semi anechoic chamber .................................................................................................... 9 7.2 Shielded fully anechoic chamber ................................................................................................... 10 7.3 Radiated measurements > 18 GHz ................................................................................................ 11 7.4 Conducted measurements with peak power meter & spectrum analyzer ....................................... 12 7.5 AC conducted ................................................................................................................................ 13 8 Sequence of testing ................................................................................................................................. 14 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ............................................................... 14 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ............................................................... 15 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz................................................................ 16 8.4 Sequence of testing radiated spurious above 18 GHz .................................................................... 17 9 Measurement uncertainty ........................................................................................................................ 18 10 Summary of measurement results .................................................................................................... 19 11 Additional information and comments .............................................................................................. 20 12 Additional EUT parameter ................................................................................................................. 21 13 Measurement results ........................................................................................................................ 22 13.1 Antenna gain ............................................................................................................................. 22 13.2 Identify worst case data rate ...................................................................................................... 22 13.3 Maximum output powe…

Text truncated - open the document above for the full version.

Conducted test results No.1-7077/23-01-04_TR1-A201-R1 January 17, 2024 Test Standard(s) FCC 15.247 ISED RSS247 This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized David Lang Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-7077/23-01-04_TR1-A201-R1 Release 1 - Page 1 of 107 Table of Content NA # Message with SA scan ~ 3 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode4 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode6 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode9 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 b mode13 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 b mode16 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode19 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode21 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode24 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 b mode28 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 b mode31 FCC 15.247 # MIMO ∑ Avg output power SA DTS ~ WLAN2G4 b mode 2400-2483.5 MHz34 FCC 15.247 # MIMO ∑ Avg psd DTS ~ WLAN2G4 b mode 2400-2483.5 MHz36 NA # Message with SA scan ~ 38 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode39 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode41 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode44 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 b mode48 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 b mode51 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode54 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode56 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode59 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 b mode63 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 b mode66 FCC 15.247 # MIMO ∑ Avg output power SA DTS ~ WLAN2G4 b mode 2400-2483.5 MHz69 FCC 15.247 # MIMO ∑ Avg psd DTS ~ WLAN2G4 b mode 2400-2483.5 MHz71 NA # Message with SA scan ~ 73 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode74 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode76 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode79 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 b mode83 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 b mode86 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode89 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode91 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode94 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 b mode98 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 b mode101 FCC 15.247 # MIMO ∑ Avg output power SA DTS ~ WLAN2G4 b mode 2400-2483.5 MHz104 FCC 15.247 # MIMO ∑ Avg psd DTS ~ WLAN2G4 b mode 2400-2483.5 MHz106 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-7077/23-01-04_TR1-A201-R1 Release 1 - Page 2 of 107 NA # Message with SA scan ~ References TC start12.01.2024 13:13:28 Ambit temp [°C] | humidity [rel%] 22.9 | 26 System version4.7.1.5 Standard | Version NA | NI Method DescriptionMessage with SA Scan b mode Information Test Parameter Switched PathEUT - SignalingUnit - SpectrumAnalyzer Message start12.01.2024 13:13:28 Message set WLAN2G4 to b mode, Frequency [MHz] 2412 , Equipment Signal analyzer,Rohde&Schwarz,FSV-40,1307.9002K40/101042,3.70 Switch matrix,CTCadvanced,SPM-4 NI DAQ,28016133,NI Verdict INFO cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-7077/23-01-04_TR1-A201-R1 Release 1 - Page 3 of 107 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode References TC start12.01.2024 13:13:38 Ambit temp [°C] | humidity [rel%] 22.9 | 26 System version4.7.1.5 Standard | Version FCC 15.247 | NI Method DescriptionFCC 15.247 Bandwidth 6dB DTS - WLAN2G4 b mode Information EUT Common Settings WLAN2G4 Number of Antenna Ports2 User InteractionNo Test Parameter Technology to testWLAN2G4 b mode Antenna port used1 Temperaturenom Voltagenom Frequency low to testTrue | Freq [MHz] 2412 Frequency mid to testFalse | Freq [MHz] 2437 Frequency high to testFalse | Freq [MHz] 2462 Auto control enabled power supply | Climatic Box No | No Additional path loss [dB]0.7 Full path name | typeEUT - SignalingUnit - SpectrumAnalyzer Equipment Signal analyzer,Rohde&Schwarz,FSV-40,1307.9002K40/101042,3.70 Switch matrix,CTCadvanced,SPM-4 NI DAQ,28016133,NI cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-7077/23-01-04_TR1-A201-R1 Release 1 - Page 4 of 107 Test at TX 2412 MHz RESULT: Reference Power cond. DESCRIPTIONLOWER LIMITUPPER LIMITMEASUREDUNITVERDICT Ref. Power 1MHz/1MHz cond. ------15.74dBmINFO Ref. Frequency------2413.100MHzINFO READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]20.74 | 13.85 | 25 Start [MHz] | Stop [MHz]2392.000 | 2432.000 RBW [MHz] | VBW [MHz]0.100000 | 0.300000 Detector | TraceModePOS | MAXH Sweep: time [ms] | count | points per Section | type50 | 200 | 10001 | SWE 2395.002400.002405.002410.002415.002420.002425.002430.00 MHz Frequency 20.0 10.0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 -60.0 dBm Magnitude BW 6dB RESULT DESCRIPTIONLOWER LIMITUPPER LIMITMEASUREDUNITVERDICT DTS Bandwidth (6dB)500---7984kHzPASS Verdict PASS cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-7077/23-01-04_TR1-A201-R1 Release 1 - Page 5 of 107 FCC 15.247 # Avg psd DTS ~ WLAN2G4 b mode References TC start12.01.2024 13:14:12 Ambit temp [°C] | humidity [rel%] 22.9 | 26 System version4.7.1.5 Standard | Version FCC 15.247 | NI MethodANSI C63.10-2013 Chapter 11.10.5 or.3 DescriptionFCC 15.247 Avg psd DTS - WLAN2G4 b mode Information EUT Common Settings WLAN2G4 Number of Antenna Ports2 User InteractionNo Test Parameter Technology to testWLAN2G4 b mode Antenna port used1 Temperaturenom Voltagenom Frequency low to testTrue | Freq [MHz] 2412 Frequency mid to testFalse | Freq [MHz] 2437 Frequency high to testFalse | Freq [MHz] 2462 Auto control enabled power supply | Climatic Box No | No Additional path loss [dB]0.7 Full path name | typeEUT - Sig…

Text truncated - open the document above for the full version.

Conducted test results No.1-7077/23-01-04_TR1-A202-R1 January 16, 2024 Test Standard(s) FCC 15.247 ISED RSS247 This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized David Lang Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-7077/23-01-04_TR1-A202-R1 Release 1 - Page 1 of 178 Table of Content NA # Message with SA scan ~ 4 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode5 FCC 15.247 # Avg psd DTS ~ WLAN2G4 g mode7 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 g mode10 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 g mode14 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 g mode17 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode20 FCC 15.247 # Avg psd DTS ~ WLAN2G4 g mode22 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 g mode25 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 g mode29 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 g mode32 FCC 15.247 # MIMO ∑ Avg output power SA DTS ~ WLAN2G4 g mode 2400-2483.5 MHz35 FCC 15.247 # MIMO ∑ Avg psd DTS ~ WLAN2G4 g mode 2400-2483.5 MHz37 NA # Message with SA scan ~ 39 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode40 FCC 15.247 # Avg psd DTS ~ WLAN2G4 g mode42 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 g mode45 FCC 15.247 # TX spurious conducted 30dBc ~ WLAN2G4 g mode49 FCC 15.247 # Avg output power SA DTS ~ WLAN2G4 g mode52 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode55 FCC 15.247 # Avg psd DTS ~ WLAN2G4 g mode57 FCC 15.2…

Text truncated - open the document above for the full version.