VXF2007122901DTV Converter Box

DTV Converter Box USER’S MANUAL 1 The lightning flash with ar rowhead symbol, within an equilateral triangle, is intended to alert the user to the pres- ence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of im- portant operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION Please be aware that new software may change the functionality of the STB. The photo and the function explanation involved in this specification is for reference only. If there is any mistake, please refer to the entity. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE This device complies with Part15 of the FCC Rules. Operation is subject to the following two condition: (1)this device may not cause harmful interference,and (2) this device must accept any interference received,in- cluding interference that may cause undesired operation. FCC 2 DTV Converter Box USER’S MANUAL Be sure to read this user’s manual before starting your operation. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. When you don’t use this unit for a long time, please pull the power cord from the outlet. Also do not use a dam- aged power cord. Do not touch the power withwet hand. If there is liquid flowing into the unit, pull out the power cord immedi- ately because it may cause fire or electric shock. Place the unit in a well ventilated and no heat environment. Install the unit horizontally. Unbal- anced installation may cause the unit to be damaged by itself. When the unit is sud- denly moved to a hot area from a cold area, it may cause prob lems. In that case, turn off the power, and turn on after 1-2 hours. Install the unit in a place with: good ventilation suitable temperature no direct sunrays low humidity low vibration influence Do not put heavy ob- jects on the unit. SAFETY INSTRUCTIONS Please read these safety instructions through carefully, before operating the receiver. Please observe all warnings and instructions on the equipment and contained in these operating instructions. DTV Converter Box USER’S MANUAL 3 Table of Contents SAFETY INSTRUCTIONS 2 GENERAL INFORMATION 4 1. Main Features 4 2. Unpacking 4 OVERVIEW OF THE EQUIPMENT 5 1. Front Panel 5 2. Rear Panel 6 3. Remote Control Unit 7 4. Installation of STB 8 4.1 Connecting to TV using RCA Sup- port 8 4.2 Connecting to TV using RF Sup- port 8 FIRST STEPS 9 MENU INFORMATION 9 ON SCREEN MENUS SELECTION 10 1. Main Menu 10 2. Channel 11 1.1 Channel Scan 11 1.2 Channel Add 12 1.3 Channel Edit 12 1.4 Manual Scan 13 1.5 Smart Antenna 13 2. OPTION 14 2.1 Clock 14 2.2 Aspect Ratio 14 2.3 Language 15 2.4 Audio Language 15 2.5 Caption Select 15 2.6 DCC Setup 16 2.7 Sleep Mode 16 2.8 Output Channel 16 3. LOCK 17 3.1 Lock System 17 3.2 Set Password 17 3.3 Block Channel 18 3.4 TV Rating-Children 18 3.5 TV Rating-General 19 3.6 Movie Rating 20 3.7 Downloadable RRT 20 TECHNICAL SPECIFICATION 21 TROUBLE SHOOTING 21 4 DTV Converter Box USER’S MANUAL 2. Unpacking Unpack the receiver and check to make sure that all of the following items are included in the packaging. ™1 x Remote Control Unit ™1 x User’s Manual ™1 x Digital Terrestrial Re- ceiver Incorporating the highly integrated single chip, the receiver is a cost- effective and high performance digi- tal ATSC converter box. The receiver provides FTA (Free-To-Air) channels with user-friendly OSD (On Screen Display) 1. Main Features ™Fully ATSC / MPEG -2 HD compliant ™Receives HD ATSC Terres- trial broadcast Channels 2-69 ™Decodes all 18 ATSC DTV standard formats ™256 colors on screen display (OSD) supported ™7 days Electronic Program Guide (EPG) ™Teletext output through VBI and OSD GENERAL INFORMATION ™Multi-language OSD (English, French, Spanish) ™Multi-language audio supported ™Multi-language Subtitle output supported ™EIA 608 Closed Caption ™ Parent control (V-chip) DTV Converter Box USER’S MANUAL 5 OVERVIEW OF THE EQUIPMENT 1. Front Panel Remote Control Sensor change to the next channel change to the previous channel switch between operation and standby modes 6 DTV Converter Box USER’S MANUAL 2. Rear Panel Main power switch UHF RF output to TV set’s antenna in VIDEO Right audio Left audio Connect to terrestrial antenna DTV Converter Box USER’S MANUAL 7 3. Remote Control Unit Function Function 1 MUTE 13 Signal Strength 2 CC 14 Page+ 3 Numeric Key 15 Page- 4 Reserved for future use 16 GUIDE 5 Sleep Mode 17 INFO 6 AUDIO 18 Flash Back 7 MENU 19 RATIO 8 ARROW 20 EXIT 9 VOL+ 21 OK 10 VOL- 22 CH+/Page+ 11 DASH(-) 23 CH-/Page- 12 STANDBY 8 DTV Converter Box USER’S MANUAL 4. Installation of STB This section explains the installation of the STB. If you need any assistance for specific equipment connection, please contact your local dealer. 4.1 Connecting to TV using RCA Support 4.2 Connecting to TV using RF Support DTV Converter Box USER’S MANUAL 9 FIRST STEPS Insert the receiver’s plug in the power socket. the receiver starts up in Standby mode. On the display the current time is shown. Insert the plugs of the auxiliary equipments in the power socket and switch them on. Select the AV channel on the TV set. The receiver is delivered with pre-programmed TV channels and can be used immediately. To see if there are any new channels, then activate the channel search. Caution! Check the connections of all equipment and the antenna are in working order before connecting the receiver to the power source. MENU INFORMATION The user interface has various ways to navigate through the menus and functions. Some of the keys on the remote control unit give direct access to functions. The most important keys are identified as EPG, colored keys, MENU and OK. Other…

Text truncated - open the document above for the full version.

1 External Photos of EUT sample Front View Back View 2 Top View Bottom View 3 Remote Controll

FCC PRODUCT LABELING AND WARNIGN STATEMENT Proposed FCC Label format: Specifcations: Text is black or white in color and is left justified, Label are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Dimension : 50mm* 28mm Proposed FCC Label Location: Label location FCC Warning statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).

1 Internal Photos of EUT sample Inside View #1 Main board View #1 2 Main board View #2 Power board View #1 3 Power board View #2 Tuner View #1 4 Tuner View #2

684 West Maude Avenue Sunnyvale, CA 94085 Tel. 650-988-0900 Fax: (650-988-6647 www.ecmg-global.com EMI Test Report On Model Name: DTV Converter Box Model Number: N9900T FCC ID Number: VXF2007122901 Prepared for COSHIP ELECTRONICS CO., LTD According to FCC Part 15 Class B Test Report #: SHE-0712-0572-FCCID Prepared by: Eddy Chen Reviewed by: Ivan Wen QC Manager: Paul Chen Test Report Released by: 2007, Dec 29 ⎯⎯⎯⎯⎯⎯⎯⎯⎯ ⎯⎯⎯⎯⎯⎯⎯⎯⎯ Paul Chen Date Test Location Tests performed in a Certified ANSI Semi-Anechoic Chamber and Shielded Room. Test Site Location: Shenzhen Academy of Metrology and Quality inspection Longzhu Road, Nanshan District,Shenzhen, Guangdong,China Tel : 86-755-26941617 Fax : 86-755-26941615 FCC Registrantion Number : 274801 CNAS Number : L0579 Table of Contents GOVERNMENT DISCLAIMER NOTICE _______________________________________________ 1 REPRODUCTION CLAUSE __________________________________________________________ 1 OPINIONS AND INTERPRETATIONS ________________________________________________ 1 STATEMENT OF MEASUREMENT UNCERTAINTY ____________________________________ 1 ADMINISTRATIVE DATA ___________________________________________________________ 2 EUT DESCRIPTION _________________________________________________________________ 2 TEST SUMMARY ___________________________________________________________________ 3 TEST MODE JUSTIFICATION _______________________________________________________ 4 EQUIPMENT MODIFICATION _______________________________________________________ 4 EUT SAMPLE PHOTOS – N9900T ___________________________________________________ 5 TEST SYSTEM DETAILS ___________________________________________________________ 10 CONFIGURATION OF TESTED SYSTEM ____________________________________________ 11 ATTACHMENT 1 – CONDUCTED EMISSION MEASUREMENT ________________________ 13 ATTACHMENT 2 – RADIATED EMISSION MEASUREMENT __________________________ 18 ATTACHMENT 3 – ANTENNA-CONDUCTED POWER MEASUREMENT________________ 23 ATTACHMENT 4 – OUTPUT AND SPURIOUS LEVEL MEASUREMENT ________________ 28 ATTACHMENT 5 – INCORPORATE CIRCUITRY TO AUTOMATICALLY PREVENT EMANATIONS ____________________________________________________________________ 35 FCC Test Report #: SHE-0712-0572-FCCID Prepared for COSHIP ELECTRONICS CO., LTD Prepared by ECMG Worldwide Certification Solution Inc. Page 1 of 36 Government Disclaimer Notice When government drawing, specification, or other data are used for any purpose other than in connection with a definitely related government procurement operation, the United States Government thereby incurs no responsibility nor any obligation whatsoever; and the fact that the Government may have formulated, furnished, or in any way supplied the said drawing, specifications, or other data, is not to be regarded by implication or otherwise in any manner licensing the holder or any other person or corporation, or conveying any rights or permission to manufacture, use, or sell patented invention that may in any way be related thereto. This report must not be used to claim product endorsement by NVLAP or any agency of the U.S. Government. Reproduction Clause Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from ECMG Worldwide Certification Solution Inc., 684 West Maude Avenue Sunnyvale, CA 94085 Opinions and Interpretations This test report relates to the abovementioned equipment under test (EUT). Without the permission of ECMG Worldwide Certification Solution Inc. Test Lab this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark on this or similar products. The manufacturer has sole responsibility of continued compliance of the device. Statement of Measurement Uncertainty The data and results referenced in the document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities that can account for a nominal measurement error. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. FCC Test Report #: SHE-0712-0572-FCCID Prepared for COSHIP ELECTRONICS CO., LTD Prepared by ECMG Worldwide Certification Solution Inc. Page 2 of 36 Administrative Data Test Sample : DTV Converter Box Model Number : N9900T Model Tested : N9900T Date Tested : 2007, Dec 28 to 2008, Jan 08 Applicant : COSHIP ELECTRONICS CO., LTD 7/F , Block A , W2 Bldg , Hi-Tech Industrial Park , Shenzhen , China Telephone : 86-755-26990000-8699 Fax : 86-755-26733777 Manufacturer : COSHIP ELECTRONICS CO., LTD 7/F , Block A , W2 Bldg , Hi-Tech Industrial Park , Shenzhen , China EUT Description COSHIP ELECTRONICS CO., LTD model tested N9900T (referred to as the EUT in this report) is a DTV Converter Box. FCC Test Report #: SHE-0712-0572-FCCID Prepared for COSHIP ELECTRONICS CO., LTD Prepared by ECMG Worldwide Certification Solution Inc. Page 3 of 36 Test Summary The Electromagnetic Compatibility requirements on model N9900T for this test are stated below. All results listed in this report relate exclusively to this above-mentioned model as the Equipment Under Test. This report confers no approval or endorsement upon any other component, host or subsystem used in the test set-up. Emission Tests Specifications Description Test Results Test Point Remark Part 15. 107 ANSI C63.4 2003 Conducted Emission Passed AC Input Port Attachment 1 Part 15.109 ANSI C63.4 2003 Radiated Emission Passed Enclosure Attachment 2 Part 15.111(a) ANSI C63.4 2003 Antenna Power Conduction Passed RF input Attachment 3 Part 15.115(b) ANSI C63.4 2003 Output and spurious conducted level Passed RF Output Attachment 4 Part 15.115(d) ANSI C63.4 2003 Incorporate circuitry to automatically prevent emanations Passed RF Input Attachment 5 FCC Test Report #: SHE-0712-0572-FCCID Prepared for COSHIP ELECTRONICS CO., LTD Prepared by ECMG Worldwide Certification Solution Inc. Page 4 of …

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS 1. Conducted Emission Measurement 2. Radiated Emission Measurement(30-1000MHz) 3. Radiated Emission Measurement(1000-5000MHz) 4. Antenna Conducted Power Measurement 5. Output and Spurious level test set up photo 6 ．Incorporate circuitry to automatically prevent emanations