W6L-EAS01Bluetooth Speaker

EAS01 User’s Manual Quick Start Guide Overview - 1 - Control Panel 3 3 4 4 8 8 7 7 6 6 9 9 10 10 11 11 12 12 13 13 1 1 2 2 5 5 Previous / volume down Next / volume up Bluetooth indicatorplay / pause / mute / call answering Mode switch Play indicator Charging indicator NFC Micro SD card port Microphone Audio input Charging port on/ off EAS01 - 2 - AUX in Bluetooth 2.1 + EDR micro SD Hook and suction cups included: Place it as you wish, even on wall. 3 interfaces to play with: Support Bluetooth, Micro SD card and AUX-in audio input/media. - 3 - 1 2 EAS01 Integrated tablet holder: Perfectly match with your tablets or smart phones - 4 - 1. Power On / Off Turn on/off the power by switch the button to ON / OFF position. When turn on the power, a short welcome message (You enter the Bluetooth/ play mode) will be played. 2. Bluetooth Pairing Enable your smart phone/tablet Bluetooth, search “EAS01” device, and add this device. If paring is successful, a voice message of “Connection is ok” will be played, and the Bluetooth signal will change from flashing to light on. ** Note: EAS01 can memorize up to 8 Bluetooth connected devices, and it can be automatically connected to the nearest one. 3. NFC (Near Field Communication Technology) pairing To pair the EAS01 via NFC, please enable your phone/tablet Bluetooch and NFC, and tab your device with the NFC logo on EAS01. Your device should detect EAS01 in seconds, and please add the EAS01 to complete the pairing. 4. AUX-in Input EAS01 also accept the 3.5mm jack AUX-in for audio input. Please use the provided 3.5mm audio cable to connect audio devices to EAS01 AUX-in port , then it’s done. Note: under AUX-in mode, press is for mute. 5. TF Card Play Insert TF card to EAS01 TF (Micro SD) card slot , EAS01 will automatically play music from TF card. 6. Volume To adjust EAS01’s volume, long press through volume + or volume – to adjust the volume. 7. Music play and pause Short press through button to play or pause the music. Under the AUX-in mode, button is for mute function. Function 7 9 9 9 3 4 1 2 5 - 5 - 8. Call Answering EAS01 has the call answering function under the Bluetooth connection mode. Press the call answering button to answer the incoming call, and press it again to end the call. If you want to ignore the incoming call, long press the call answering button to ignore the incoming call. Note: Call answering function is only available on the Bluetooth mode 9. Song Switch Short press through previous / next button to switch the songs. Note: Songs switch function is unavailable under AUX-in mode. 10. Audio input source Switch To switch input source, press button for 3 seconds. Sequences for cycle modes are TF card mode → AUX-in mode → Bluetooth mode. 9 9 3 10 1 EAS01 - 6 - Features 1. Bluetooth 2.1+ EDR wireless technology Offer up to 10 meters/ 30 feet of wireless connection, fast pairing and secured encryption. 2. Tap to link with NFC Simply tap with active NFC device to link 3. Built-in rechargeable battery Rechargeable battery with 8 hours of playtime. Battery capacity indicator with iOS device. 4. Built-in microphone Provide hands-free call answering or conference-call application. 5. Integrated tablet holder: Perfectly match with your tablets or smart phones 6. Hook and suction cups included: Place it as you wish, even on wall. 7. 3 interfaces to play with: Support Bluetooth, Micro SD card and AUX-in audio input/media. - 7 - Specifications EAS01 Audio Specifications Amplifier Power Frequency Response Maximum Sound Level Signal-to-Noise Ratio Dimensions of Speaker unit 2 x 3 watts 120Hz – 20kHz 88 dBA >60 dB Φ4cm full range General Specifications Battery Type Battery Charge Time Color Dimensions Weights Li-ion rechargeable (1100mAh , 3.7V) About 4~5 hours Red / Blue Ø60 mm * 181 mm 280 g Battery Life (Approx.) Audio Playback: Approximately 6~8 hours (under 50% volume) Connectivity Specifications Bluetooth Technology Bluetooth Frequency Range Profile Support Modulation Mode Transmitting Power Line of Signal Range Ver 2.1 + EDR 2.402 GHz - 2.480 GHz A2DP, AVRCP, HFP, HSP,OPP PSK 3Mbps, π/4-DQPSK ,8DPSK Specification Power Class 2 30 ft (10 m) - 8 - Safety Instructions WARNING! ELECTRIC SHOCK HAZARD: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO WATER. Read and follow these instructions, heed all warnings, and keep this document for future reference. Your product is suitable for use in semi-tropical and moderate climates only. Set up your product in a stable location so it will not fall and cause product damage or bodily harm. Do not use your product near water, including dripping or splashing sources (e.g., indoor fountains), or near objects filled with liquids, such as vases or fish tanks. Do not use your product near heat sources (e.g., radiators, heat registers, stoves, open flames, such as lighted candles, or other heat-producing devices, such as audio amplifiers or TVs). Do not block ventilation openings or push objects into product vents, ports or slots. Doing so may create an electric shock or fire hazard. Maintain a minimum distance of at least 15 cm (6 inches) around your product for sufficient ventilation. Covering ventilation openings with such items as newspapers, tablecloths, or curtains may impede ventilation and cause a fire. Do not, under any circumstance, modify your product’s power supply. Unplug your product during lightning storms or when unused for long periods of time. Only use approved attachments and accessories specified by ENERMAX audio. Clean your product using only a dry cloth. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as when liquid has been spilled or objects have fallen into the products, or the products has been exposed to rain or moisture, does not operate normally or has been dropped. FOR PRODUCTS THAT INCLUDE AUDIO OUT Prevention of hearing loss CAUTION: Permanent hearing loss may occur if earphones or…

Text truncated - open the document above for the full version.

Enermax Technology Corporation Date (30/08/2015) BABT TCB Octagon House , Concorde Way, Segensworth North, Fareham , Hampshire PO15 5RL , United Kingdom Dear Sir or Madam, We, Enermax Technology Corporation 15F-2, No.888, Jing-Guo Road, Taoyuan City(330),Taiwan R.O.C. hereby authorize TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Miiler Dan Phone: +86-755-3332 3289 e-mail: Dan.Miiler @tuv-sud.cn to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Type of equipment: Bluetooth Speaker Model name: EAS01 FCC ID: W6L-EAS01 This authorization expires one year from the current date. Sincerely, Company Officer: Claire Chuang Telephone Number: +886-3-316 1675 Fax Number: +886-3-346 6626 E-mail: [email protected]

Enermax Technology Corporation Date (30/08/2015) TUV SUD BABT TCB&FCB&NB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, Enermax Technology Corporation 15F-2, No.888, Jing-Guo Road, Taoyuan City(330), Taiwan R.O.C , hereby authorize ( Ben Huang [ Nowd Testing Services Co.,Ltd. / No. 606, FuerYuanjian Business Centre, 25 Zone, Bao'an District, Shenzhen, Guandong (86) 755-27830065 ) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Type of equipment: Bluetooth Speaker Model name: EAS01 FCC ID: W6L-EAS01 This authorization expires on (31/12/2015) Sincerely, Company Officer: Telephone Number: +886-3-316 1675 Email: [email protected]

Enermax Technology Corporation Date (30/08/2015) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: W6L-EAS01 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Enermax Technology Corporation hereby requests permanent confidential treatment of information accompanying this application as outlined below: [Common exhibits for which confidentiality is requested are: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation] Shanghai Jiangxu trade Co., Ltd. also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (up to 180) days: [Common exhibits for which short-term confidentiality is requested are: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Claire Telephone Number: +886-3-316 1675 Email: [email protected]

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

R XXX-XXXXXXXXXXXXXXXXXX 82mm /制造年份2015年 /产品名称 /蓝牙喇叭/

Photo 7 Photo 8 Ant Photo 9

FCC ID: W6L-EAS01 RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Accordance to KDB 447498 D01 v05r02 , clause 4.3.1 Standalone SAR test exclusion considerations The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID: W6L-EAS01 Maximum measured transmitter power. 1Mbps Test Channel Frequency (MHz) Peak Output Power (dBm) LIMIT (dBm) CH00 2402 3.07 30 CH39 2441 4.38 30 CH78 2480 4.03 30 2Mbps CH00 2402 3.28 20.96 CH39 2441 3.47 20.96 CH78 2480 3.50 20.96 3Mbps CH00 2402 3.18 20.96 CH39 2441 3.45 20.96 CH78 2480 3.50 20.96 Remark: The best case gain of the antenna is 1.0 dBi. 1.0 dBi logarithmic terms convert to numeric result is nearly 1.26 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)] FCC ID: W6L-EAS01 Test Channel Range tune up max Peak power (dBm) [(max. power of channel, including tune-up tolerance, mW) (min. test separation distance,mm)] [f(GHz)] Result Limit 1Mbps CH00 2~5 5 3.16 50 2402 0.098 3 CH39 2~5 5 3.16 50 2441 0.099 3 CH78 2~5 5 3.16 50 2480 0.100 3 2Mbps CH00 2~4 4 2.51 50 2402 0.078 3 CH39 2~4 4 2.51 50 2441 0.078 3 CH78 2~4 4 2.51 50 2480 0.079 3 3Mbps CH00 2~4 4 2.51 50 2402 0.078 3 CH39 2~4 4 2.51 50 2441 0.078 3 CH78 2~4 4 2.51 50 2480 0.079 3 The test Result is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Conclusion: No SAR is required.

FCC RADIO TEST REPORT-BT FCC ID: W6L-EAS01 Product : Bluetooth Speaker Trade Name : ENERMAX Model No : EAS01 Serial Model : N/A Applicant’s name : Enermax Technology Corporation Address : 15F-2, No.888, Jing-Guo Road, Taoyuan City(330), Taiwan R.O.C Prepared By : Nowd Testing Services Co.,Ltd. No. 606, FuerYuanjian Business Centre, 25 Zone, Bao'an District, Shenzhen, Guandong Tel : (86) 755-27830065 Fax : (86) 755-27830095 Report No. : NTS-150721016F Date of Test : Jul.21, 2015 Date of Rep. : Jul.29, 2015 Page 2 of 66 Report No.: NTS-150721016F TEST RESULT CERTIFICATION Applicant’s name ................. : Enermax Technology Corporation Address ................................. : 15F-2, No.888, Jing-Guo Road, Taoyuan City(330), Taiwan R.O.C Manufacture's Name............ : H&Y Technology Co., Ltd. Address ................................. : No.24,Xialian Road, 4th Industrial Area,Xiagang,Changan Town,Dongguan City,Guangdong Product description Product name ............................ : Bluetooth Speaker Model and/or type reference : EAS01 Standards ............................. : FCC Part15.247 Test procedure ............................... ANSI C63.4-2003, Public Notice-DA 00-705 This device described above has been tested by Nowd Testing Services Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Nowd Testing Services Co., Ltd., this document may be altered or revised by ShenZhen Nowd Testing Services Co., Ltd., personal only, and shall be noted in the revision of the document. Date of Test ........................................... : Date (s) of performance of tests ............. : 21 Jul. 2015 ~29 Jul. 2015 Date of Issue .......................................... : 29 Jul. 2015 Test Result.............................................. : Pass Prepared by: Jack Wu Testing Engineer Reviewed by: Andy Xie Technical Manager Approved by: somnus Authorized Signatory Page 3 of 66 Report No.: NTS-150721016F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 9 2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 18 3.2.3 DEVIATION FROM TEST STANDARD 19 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BELOW 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30M – 1000 MHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 4 . NUMBER OF HOPPING CHANNEL 25 4.1 APPLIED PROCEDURES / LIMIT 25 4.1.1 TEST PROCEDURE 25 4.1.2 DEVIATION FROM STANDARD 25 4.1.3 TEST SETUP 25 4.1.4 EUT OPERATION CONDITIONS 25 4.1.5 TEST RESULTS 26 5 . AVERAGE TIME OF OCCUPANCY 27 5.1 APPLIED PROCEDURES / LIMIT 27 Page 4 of 66 Report No.: NTS-150721016F Table of Contents Page 5.1.1 TEST PROCEDURE 27 5.1.2 DEVIATION FROM STANDARD 27 5.1.3 TEST SETUP 28 5.1.4 EUT OPERATION CONDITIONS 28 5.1.5 TEST RESULTS 29 6 . HOPPING CHANNEL SEPARATION MEASUREMENT 35 6.1 APPLIED PROCEDURES / LIMIT 35 6.1.1 TEST PROCEDURE 35 6.1.2 DEVIATION FROM STANDARD 35 6.1.3 TEST SETUP 35 6.1.4 EUT OPERATION CONDITIONS 35 6.1.5 TEST RESULTS 36 7 . BANDWIDTH TEST 42 7.1 APPLIED PROCEDURES / LIMIT 42 7.1.1 TEST PROCEDURE 42 7.1.2 DEVIATION FROM STANDARD 42 7.1.3 TEST SETUP 42 7.1.4 EUT OPERATION CONDITIONS 42 7.1.5 TEST RESULTS 43 8 . PEAK OUTPUT POWER TEST 49 8.1 APPLIED PROCEDURES / LIMIT 49 8.1.1 TEST PROCEDURE 49 8.1.2 DEVIATION FROM STANDARD 49 8.1.3 TEST SETUP 49 8.1.4 EUT OPERATION CONDITIONS 49 8.1.5 TEST RESULTS 50 9 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 56 9.1 DEVIATION FROM STANDARD 56 9.2 TEST SETUP 56 9.3 EUT OPERATION CONDITIONS 56 9.4 TEST RESULTS 57 10 . ANTENNA REQUIREMENT 64 10.1 STANDARD REQUIREMENT 64 10.2 EUT ANTENNA 64 11 . EUT TEST PHOTO 65 Page 5 of 66 Report No.: NTS-150721016F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(a)(1) Hopping Channel Separation PASS 15.247(b)(1) Peak Output Power PASS 15.247(c) Radiated Spurious Emission PASS 15.247(a)(iii) Number of Hopping Frequency PASS 15.247(a)(iii) Dwell Time PASS 15.247(a)(1) Bandwidth PASS 15.205 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Page 6 of 66 Report No.: NTS-150721016F 1.1 TEST FACILITY Nowd Testing Services Co.,Ltd. Add. : No. 606, FuerYuanjian Business Centre, 25 Zone, Bao'an District, Shenzhen, Guandong FCC Registration No.:230614; 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 66 Report No.: NTS-150721016F 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Bluetooth Speaker Trade Name ENERMAX Model Name EAS01 Serial Model N/A Model Difference N/A Product Description The EUT is a Bluetooth Speaker BT Operation Frequency: 2402~2480 MHz Modulation Type: BT(1M…

Text truncated - open the document above for the full version.

Page 65 of 66 Report No.: NTS-150721016F 11. EUT TEST PHOTO Radiated Measurement Photos Page 66 of 66 Report No.: NTS-150721016F CONDUCTED EMISSION Photos