Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 3 | 9 | 851 MHz - 861 MHz | 5.061 W | W7W | Amp |
Grant NotesOutput power is conducted. Device supports LTE and iDEN modulations.
This filing contains compliance information and test data for incumbent/duly-authorized public safety narrowband operations in Public Safety Broadband (FirstNet) spectrum. The single unit RF Exposure compliance for the device was based on maximum antenna gain 17 dBi and minimum separation distance 300 cm. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems.
RF exposure of simultaneous transmission including multiple units in single enclosure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).