W6UNHA1900P-40W

SOLiD, Inc.

DAS

Click to zoom

Application Details

Equipment Class: B2I - Part 20 Industrial Booster (CMRS)
Date of Grant: May 20, 2020
Application Purpose: Original Equipment
Date of Application: May 20, 2020
Equipment Note: DAS
Frequency Range: 1930.00000000 - 1995.00000000
Company: SOLiD, Inc.
Country: South Korea

Documents & Files

Select a file to view

Users Manual

Attestation Statements

Cover Letter(s)

External Photos

ID Label/Location Info

Internal Photos

RF Exposure Info

Test Report

Test Setup Photos

Contact Information

Applicant

Yong Chul Kim(Team Manager)

[email protected]+82-31-627-6292Fax: +82-31-627-6009

Test Firm

HCT Co., Ltd.Lee Yoon-Jung

[email protected]82-31-645-6432Fax: 82-31-645-6401

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
5	24E	1.93 GHz - 2.00 GHz	42.56 W	G7W	Amp

Confidentiality

Long Term

Grant Notes

Output power is conducted. Device supports GSM, CDMA, WCDMA, and LTE 5/10MHz modulation in the downlink path. This device is authorized to operate only as part of a distributed-antenna booster system. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna(s) used for this transmitter must be fixed-mounted on outdoor/indoor permanent structures with a separation distance from all persons during normal operation as documented in this filing. The single unit RF Exposure compliance using a 16dBi antenna requires a minimum separation distance between persons and the antenna of 6 meters. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and licensing, and the use of higher gain antennas may require larger separation distances.