W6UNHRFM7L

SOLiD, Inc.

nGENESIS

Application Details

Equipment Class: B9B - Part 90 Class B Industrial Booster (non-SMR)
Date of Grant: Mar 12, 2026
Application Purpose: Original Equipment
Equipment Note: nGENESIS
Frequency Range: 758.00000000 - 768.00000000
Company: SOLiD, Inc.
Country: South Korea

Documents & Files

Select a file to view

Attestation Statements

Cover Letter(s)

ID Label/Location Info

RF Exposure Info

Test Report

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
1	9	758 MHz - 768 MHz	15.14 W	G7W	Amp
2	9	758 MHz - 768 MHz	15.14 W	D7W	Amp

Confidentiality

Long Term

Grant Notes

In-Building DAS Booster. Output power is conducted. Device supports LTE and 5GNR. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The single unit RF Exposure compliance for the device using an 17dBi antenna below 1GHz requires a minimum separation distance between person and the antenna of 530cm. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation, and the use of higher gain antennas may require larger separation distances.

W6UNHRFM7L

Application Details

Documents & Files

Attestation Statements

Cover Letter(s)

ID Label/Location Info

RF Exposure Info

Test Report

Contact Information

Applicant

Technical Contact

Test Firm

Technical Specifications

Other Applications from SOLiD, Inc.