W6UNHRFM8CnGENESIS

Date: 1/16/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: W6UNHRFM8C 1. SOLiD, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. SOLiD, Inc. (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. SOLiD, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.

1 Date: 2/11/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: W6UNHRFM8C Grantee FRN: 0018550988 To whom it may concern: FCC US Agent Agent Company Name: Solid Gear, Inc. FCC FRN: 0034264838 Agent Contact Name: Ryan Oliveira Agent US Address: 800 Klein Rd, Suite 200, Plano TX 75074 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of SOLiD, Inc. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, Ryan Oliveira Senior Product Line Manager Solid Gear, Inc.

Date: 1/22/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: W6UNHRFM8C SOLiD, Inc. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Contact Person: Ryan Oliveira Company Name: Solid Gear, Inc. Company Address: 800 Klein Rd, Suite 200, Plano TX 75044, U.S.A Email: [email protected] Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.

Date: 1/12/2026 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.

Declaration on KDB935210 D02 technical requirements applicability Hereafter analysis on technical requirements cited in KDB 935210 D02 (v04r03), section V, bullet points (j) and (k), to highlight which were considered and evaluated, because applicable, within Part 90 scope and which not. Bullet point (j): sub-point (1): In accordance with sub-point (j)(2)(i)(B), Section 20.21(B2I) is applicable. sub-point (2): considered and evaluated because EUT works also on 862-869 MHz band, please refer to RF report. sub-point (i)(A): In accordance with sub-point (j)(2)(i)(B), Section 20.21(B2I) is applicable. sub-point (i)(B): considered and evaluated because EUT works also on 862-869 MHz band, please refer to RF report. sub-point (3): neither considered nor evaluated because EUT does not work on 800 MHz NSPAC Public Safety Band (851-854 MHz downlink; 806-809 MHz uplink). sub-point (4): neither considered nor evaluated because EUT does not work on 900 MHz band. sub-point (5): In accordance with sub-point (j)(2)(i)(B), Section 20.21(B2I) is applicable. sub-point (6): neither considered nor evaluated because EUT does not work on 700 MHz Band. Bullet point (k): In accordance with sub-point (j)(2)(i)(B), Section 20.21(B2I) is applicable.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Jan, 12, 2026 To Whom It May Concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, ADT Co.,Ltd. requests confidentiality for the following products: FCC ID: W6UNHRFM8C The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request  Schematic  Block Diagram  Operational description  Part Location We request that the following information submitted be held short-term confidential treatment for 180 days. Short- term Confidential Request  Internal Photos  External Photos  Test-Setup Photos  User’s Manual If you have any questions, please feel free to contact me at the address shown below. Best regards, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.

Date: 2/10/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: W6UNHRFM8C ATTESTATION With respect to section IV (d) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages will be shown in online and point-of-sale marketing materials and on outside packaging of device.  For frequency bands under “Industrial (Part 20) Signal Booster”: With respect to section IV (d) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages will be shown in online and point-of-sale marketing materials and on outside packaging of device.  For frequency bands under “Part 90 Signal Booster”: With respect to section V (g) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages and Class A/B disclosure will be also shown in online and point-of-sale marketing materials and on outside packaging of device. Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.

SOLiD 본 문서의 저작권은SOLiD에 있으며, 허가없는무단전재와재배포 등 사외반출을금지합니다. Phoenix 개발팀 nGENESISFCC Label_Phoenix 본 문서의 저작권은SOLiD에 있으며, 허가없는무단전재와재배포 등 사외반출을금지합니다. 2 History Rev No.DataPage변경 내용비고 V0.126.01.13초안 V0.226.02.04Rainproof추가 및 오타 수정 본 문서의 저작권은SOLiD에 있으며, 허가없는무단전재와재배포 등 사외반출을금지합니다. 3 nHRFM명판통합건검토(1/2) 베트남 생산 한국 생산 NAME PLATE Product : SOLiD GENESIS ® Model : nHRFM_7L Made in KOREA Product : SOLiD GENESIS ® Model : nHRFM_8C Product : SOLiD GENESIS ® Model : nHRFM_17 Product : SOLiD GENESIS ® Model : nHRFM_19 Product : SOLiD GENESIS ® Model : nHRFM_23 Product : SOLiD GENESIS ® Model : nHRFM_25 FCC ID : W6UNHRFM7L Made in KOREA FCC ID : W6UNHRFM8C Made in KOREA FCC ID : W6UNHRFM17 Made in KOREA FCC ID : W6UNHRFM19 Made in KOREA FCC ID : W6UNHRFM23 Made in KOREA FCC ID : W6UNHRFM25 Product : SOLiD GENESIS ® Model : nHRFM_7L Made in Vietnam Product : SOLiD GENESIS ® Model : nHRFM_8C Product : SOLiD GENESIS ® Model : nHRFM_17 Product : SOLiD GENESIS ® Model : nHRFM_19 Product : SOLiD GENESIS ® Model : nHRFM_23 Product : SOLiD GENESIS ® Model : nHRFM_25 FCC ID : W6UNHRFM7L Made in Vietnam FCC ID : W6UNHRFM8C Made in Vietnam FCC ID : W6UNHRFM17 Made in Vietnam FCC ID : W6UNHRFM19 Made in Vietnam FCC ID : W6UNHRFM23 Made in Vietnam FCC ID : W6UNHRFM25 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 4 nHRFM명판 통합건 검토 (2/2) 베트남 생산 한국 생산 NAME PLATE Product : SOLiD GENESIS ® Model : nHRFM_34 Made in KOREA Product : SOLiD GENESIS ® Model : nHRFM_40-20W FCC ID : W6UNHRFM34 Made in KOREA FCC ID : W6UNHRFM40-20W Product : SOLiD GENESIS ® Model : nHRFM_34 Made in Vietnam Product : SOLiD GENESIS ® Model : nHRFM_40-20W FCC ID : W6UNHRFM34 Made in Vietnam FCC ID : W6UNHRFM40-20W Product : SOLiD GENESIS ® Model : nHRFM_40-40W Made in KOREA FCC ID : W6UNHRFM40-40W Product : SOLiD GENESIS ® Model : nHRFM_40-40W Made in Vietnam FCC ID : W6UNHRFM40-40W 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 5 nHRFM명판 부착 위치 예시 FCC 선언 문구 부착위치FCC WARNING 문구 nHRFM_ 17, 19, 23, 25, 34, 40 nHRFM_ 7L, 8C (nHRFM_17,19,23) (nHRFM_7L,8C,25,34,40) The label attachment using permanent adhesive. The label will neither peel off nor fade during the expected lifespan. 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 6 Sub-Band Model Name FCC WARNING 문구 (Band 구분 있음) 7L nLRFM_7L nMRFM_7L nHRFM_7L 8C nLRFM_8C nMRFM_8C nHRFM_8C 17 nLRFM_17 nMRFM_17 nHRFM_17 19 nLRFM_19 nMRFM_19 nHRFM_19 23 nLRFM_23 nMRFM_23 nHRFM_23 25 nLRFM_25 nMRFM_25 nHRFM_25 34 nLRFM_34 nMRFM_34 nHRFM_34 40 nLRFM_40 nMRFM_40 nHRFM_40 Sub-Band Model Name FCC WARNING 문구 (Band 구분 없음) 7L nLRFM_7L nMRFM_7L nHRFM_7L 8C nLRFM_8C nMRFM_8C nHRFM_8C 17 nLRFM_17 nMRFM_17 nHRFM_17 19 nLRFM_19 nMRFM_19 nHRFM_19 23 nLRFM_23 nMRFM_23 nHRFM_23 25 nLRFM_25 nMRFM_25 nHRFM_25 34 nLRFM_34 nMRFM_34 nHRFM_34 40 nLRFM_40 nMRFM_40 nHRFM_40 nXRFM명판 통합건 검토 FCC WARNING 문구FCC선언 문구 THANK YOU! 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다.

- Band = - Transmitting frequency =MHz~MHz mm dBi = Maximum power densityNumeric power gain of the antenna Maximum power with turn-up toleranceDistance from transmitting antenna 2 ( f/1500 ) FCC ID : W6UNHRFM8C Maximum Permissible Exposure(MPE) evaluation February 5, 2026 ESMR - Min. test separation distance =5300 862869 - Max. Antenna Gain = 17 - Max. power with turn-up tolerance =42.0015849.0mWdBm S = P G / ( 4 R 2 π ) , ㎽/㎝ 2 S =G = P =R = = 0.225030 ㎽/㎝ 2 Conclusion:The exposure condition of this device is compliant with FCC rules. The limit for maximum permissible exposure = 0.574666 ㎽/㎝ Copyright ⓒ 2026, UL Korea, Ltd. - Band = - Transmitting frequency =MHz~MHz mm dBi = Maximum power densityNumeric power gain of the antenna Maximum power with turn-up toleranceDistance from transmitting antenna 2 ( f/1500 ) FCC ID : W6UNHRFM8C Maximum Permissible Exposure(MPE) evaluation February 5, 2026 Cellular - Min. test separation distance =5300 869894 - Max. Antenna Gain = 17 - Max. power with turn-up tolerance =42.0015849.0mWdBm S = P G / ( 4 R 2 π ) , ㎽/㎝ 2 S =G = P =R = = 0.225030 ㎽/㎝ 2 Conclusion:The exposure condition of this device is compliant with FCC rules. The limit for maximum permissible exposure = 0.579333 ㎽/㎝ Copyright ⓒ 2026, UL Korea, Ltd.

CERTIFICATION TEST REPORT Report Number. : U-4792013161-FR10V2 Applicant : SOLiD, Inc. 10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Model : nHRFM_8C FCC ID : W6UNHRFM8C EUT Description : nGENESIS Test Standard(s) : FCC CFR47 PART 2 FCC CFR47 PART 22 FCC CFR47 PART 90 Date Of Issue: 2026-02-20 Prepared by: UL KOREA LTD. 26th floor, 152, Teheran-ro, Gangnam-gu Seoul, 06236, Korea Uiwang Test Site: UL Korea, Ltd. Uiwang Laboratory 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea, TEL: (031) 389-9603 FAX: (031) 462-8355 REPORT NO: U-4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 2 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Revision History Rev. Issue Date Revisions Revised By V1 2026-01-19 Initial issue Jaehyeok Bang V2 2026-02-20 Updated to address TCB`s question Jaehyeok Bang REPORT NO: U-4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 3 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 6 4.2. SAMPLE CALCULATION .............................................................................................. 6 4.3. MEASUREMENT UNCERTAINTY ................................................................................ 6 4.4. DECISION RULE .......................................................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT ................................................................................................ 7 5.2. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................... 7 5.3. WORST-CASE ORIENTATION ..................................................................................... 8 5.4. DESCRIPTION OF TEST SETUP ................................................................................. 9 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................10 7. SUMMARY TABLE ...........................................................................................................11 8. CONDUCTED RESULTS ..................................................................................................12 8.1. AGC THRESHOLD ......................................................................................................12 8.2. OUT-OF-BAND REJECTION .......................................................................................14 8.2.1. OUT-OF-BAND REJECTION TEST PLOT ...........................................................15 8.3. INPUT-VERSUS-OUTPUT SIGNAL COMPARISON ....................................................16 8.3.1. INPUT-VERSUS-OUTPUT SIGNAL COMPARISON TEST PLOT .......................18 8.4. INPUT/OUTPUT POWER AND AMPLIFIER/BOOSTER GAIN ....................................22 8.4.1. OUTPUT POWER AND PARR TEST PLOT ........................................................25 8.5. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS AND SPURIOUS EMISSIONS ............29 8.5.1. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS PLOT .........................................32 8.5.2. CONDUCTED SPURIOUS EMISSIONS PLOT ....................................................36 9. RADIATED RESULTS .......................................................................................................49 9.1. RADIATED SPURIOUS EMISSIONS ...........................................................................49 9.1.1. RADIATED SPURIOUS TEST RESULTS (ABOVE 1GHz) ..................................50 9.1.2. RADIATED SPURIOUS TEST RESULTS (BELOW 1GHz) ..................................53 9.1.3. RADIATED SPURIOUS TEST RESULTS (BELOW 30MHz) ................................55 REPORT NO: U-4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 4 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SOLiD, Inc. EUT DESCRIPTION: nGENESIS MODEL NUMBER: nHRFM_8C SERIAL NUMBER: Identical prototype DATE TESTED: 2025-10-01 - 2026-01-19 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 2 FCC PART 22 FCC PART 90 Complies Complies Complies UL KOREA LTD. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL KOREA LTD. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The r…

Text truncated - open the document above for the full version.

REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 34 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular Narrow band Low band Edge High band Edge 1 signal AGC threshold 1 signal 3 dB above AGC threshold 2 signal AGC threshold 2 signal 3 dB above AGC threshold REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 35 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular Broad band Low band Edge High band Edge 1 signal AGC threshold 1 signal 3 dB above AGC threshold 2 signal AGC threshold 2 signal 3 dB above AGC threshold REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 36 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 8.5.2. CONDUCTED SPURIOUS EMISSIONS PLOT ESMR / Narrowband / Low channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 37 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd ESMR / Narrowband / Mid channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 38 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd ESMR / Narrowband / High channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 39 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd ESMR / Broadband / Low channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 40 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd ESMR / Broadband / Mid channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 41 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd ESMR / Broadband / High channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 42 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd EA licensee's frequency block Low channel High channel Narrow band Broad band REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 43 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular / Narrowband / Low channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 44 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular / Narrowband / Mid channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 45 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular / Narrowband / High channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 46 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular / Broadband / Low channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 47 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Cellular / Broadband / Mid channel REPORT NO: U- 4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 4…

Text truncated - open the document above for the full version.

REPORT NO: U-4792013161-FR10V2 DATE: 2026-02-20 FCC ID: W6UNHRFM8C Page 49 of 56 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 9. RADIATED RESULTS 9.1. RADIATED SPURIOUS EMISSIONS RULE PART(S) FCC: §2.1053 LIMIT § 2.1053 Measurements required: Field strength of spurious radiation. (a) Measurements shall be made to detect spurious emissions that may be radiated directly from the cabinet, control circuits, power leads, or intermediate circuit elements under normal conditions of installation and operation. Curves or equivalent data shall be supplied showing the magnitude of each harmonic and other spurious emission. For this test, single sideband, independent sideband, and controlled carrier transmitters shall be modulated under the conditions specified in paragraph (c) of §2.1049, as appropriate. For equipment operating on frequencies below 890 MHz, an open field test is normally required, with the measuring instrument antenna located in the far-field at all test frequencies. In the event it is either impractical or impossible to make open field measurements (e.g. a broadcast transmitter installed in a building) measurements will be accepted of the equipment as installed. Such measurements must be accompanied by a description of the site where the measurements were made showing the location of any possible source of reflections which might distort the field strength measurements. Information submitted shall include the relative radiated power of each spurious emission with reference to the rated power output of the transmitter, assuming all emissions are radiated from halfwave dipole antennas. (b) The measurements specified in paragraph (a) of this section shall be made for the following equipment: (1) Those in which the spurious emissions are required to be 60 dB or more below the mean power of the transmitter. (2) All equipment operating on frequencies higher than 25 MHz. (3) All equipment where the antenna is an integral part of, and attached directly to the transmitter. (4) Other types of equipment as required, when deemed necessary by the Commission. TEST PROCEDURE Because KDB 935210 D05 procedure does not provide this requirement, measurements were in accordance with the test methods section 5.5 of ANSI C63.26-2015 a) Place the EUT in the center of the turntable. The EUT shall be configured to transmit into the standard non-radiating load (for measuring radiated spurious emissions), connected with cables of minimal length unless specified otherwise. If the EUT uses an adjustable antenna, the antenna shall be positioned to the length that produces the worst case emission at the fundamental operating frequency. b) Each emission under consideration shall be evaluated: 1) Raise and lower the measurement antenna in accordance 5.5.2, as necessary to enable detection of the maximum emission amplitude relative to measurement antenna height. 2) Rotate the EUT through 360° to determine the maximum emission level relative to the axial position. 3) Return the turntable to the azimuth where the highest emission amplitude level was observed. 4) Vary the measurement antenna height again through 1 m to 4 m again to find the height associated with the maximum emission amplitude. 5) Record the measured emission amplitude level and frequency using the appropriate RBW. c) Repeat step b) for each emission frequency with the measurement antenna oriented in both the horizontal and vertical polarizations to determine the orientation that gives the maximum emissions ampli…

Text truncated - open the document above for the full version.