Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Date: 2/11/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: W6UNMRFM17 Grantee FRN: 0018550988 SOLiD, Inc. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: FCC FRN: 0034264838 Contact Person: Ryan Oliveira Company Name: Solid Gear, Inc. Company Address: 800 Klein Rd, Suite 200, Plano TX 75044, U.S.A Email: [email protected] Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Date: 2/10/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: W6UNMRFM17 ATTESTATION With respect to section IV (d) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages will be shown in online and point-of-sale marketing materials and on outside packaging of device. ⚫ For frequency bands under “Industrial (Part 20) Signal Booster”: With respect to section IV (d) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages will be shown in online and point-of-sale marketing materials and on outside packaging of device. Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Date: 1/23/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: W6UNMRFM17 1. SOLiD, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. SOLiD, Inc. (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. SOLiD, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
1 Date: 2/11/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: W6UNMRFM17 Grantee FRN: 0018550988 To whom it may concern: FCC US Agent Agent Company Name: Solid Gear, Inc. FCC FRN: 0034264838 Agent Contact Name: Ryan Oliveira Agent US Address: 800 Klein Rd, Suite 200, Plano TX 75044, U.S.A Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of SOLiD, Inc. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, Ryan Oliveira Senior Product Line Manager Solid Gear, Inc.
W6UNMRFM17Date: 2/11/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: W6UNMRFM17 Grantee FRN: 0018550988 SOLiD, Inc. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: FCC FRN: 0034264838 Contact Person: Ryan Oliveira Company Name: Solid Gear, Inc. Company Address: 800 Klein Rd, Suite 200, Plano TX 75044, U.S.A Email: [email protected] Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 1/23/2026 To Whom It May Concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, SOLiD, Inc. requests confidentiality for the following products: FCC ID: W6UNMRFM17 The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request • Schematic • Block Diagram • Operational description • Part List We request that the following information submitted be held short-term confidential treatment for 180 days. Short- term Confidential Request • Internal Photos • External Photos • Test-Setup Photos • User’s Manual If you have any questions, please feel free to contact me at the address shown below. Best regards, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Date: 1/23/2026 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
SOLiD 본문서의저작권은SOLiD에있으며, 허가없는무단전재와재배포등사외반출을금지합니다. Phoenix 개발팀 nGENESISFCC Label_Phoenix 본문서의저작권은SOLiD에있으며, 허가없는무단전재와재배포등사외반출을금지합니다. 2 History Rev No.DataPage변경내용비고 V0.126.01.13초안 V0.226.02.04Rainproof추가및오타수정 본문서의저작권은SOLiD에있으며, 허가없는무단전재와재배포등사외반출을금지합니다. 3 nMRFM명판통합건검토(1/2) 베트남 생산 한국 생산 NAME PLATE Product : SOLiD GENESIS ® Model : nMRFM_7L Made in KOREA Product : SOLiD GENESIS ® Model : nMRFM_8C Product : SOLiD GENESIS ® Model : nMRFM_17 Product : SOLiD GENESIS ® Model : nMRFM_19 Product : SOLiD GENESIS ® Model : nMRFM_23 Product : SOLiD GENESIS ® Model : nMRFM_25 FCC ID : W6UNMRFM7L Made in KOREA FCC ID : W6UNMRFM8C Made in KOREA FCC ID : W6UNMRFM17 Made in KOREA FCC ID : W6UNMRFM19 Made in KOREA FCC ID : W6UNMRFM23 Made in KOREA FCC ID : W6UNMRFM25 Product : SOLiD GENESIS ® Model : nMRFM_7L Made in Vietnam Product : SOLiD GENESIS ® Model : nMRFM_8C Product : SOLiD GENESIS ® Model : nMRFM_17 Product : SOLiD GENESIS ® Model : nMRFM_19 Product : SOLiD GENESIS ® Model : nMRFM_23 Product : SOLiD GENESIS ® Model : nMRFM_25 FCC ID : W6UNMRFM7L Made in Vietnam FCC ID : W6UNMRFM8C Made in Vietnam FCC ID : W6UNMRFM17 Made in Vietnam FCC ID : W6UNMRFM19 Made in Vietnam FCC ID : W6UNMRFM23 Made in Vietnam FCC ID : W6UNMRFM25 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 4 nMRFM명판 통합건 검토 (2/2) 베트남 생산 한국 생산 NAME PLATE Product : SOLiD GENESIS ® Model : nMRFM_34 Made in KOREA Product : SOLiD GENESIS ® Model : nMRFM_40 FCC ID : W6UNMRFM34 Made in KOREA FCC ID : W6UNMRFM40 Product : SOLiD GENESIS ® Model : nMRFM_34 Made in Vietnam Product : SOLiD GENESIS ® Model : nMRFM_40 FCC ID : W6UNMRFM34 Made in Vietnam FCC ID : W6UNMRFM40 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 5 FCC 선언 문구 부착위치FCC WARNING 문구 nMRFM_ 17, 19, 23, 25, 34, 40 nMRFM_ 7L, 8C nMRFM명판 부착 위치 예시 (nMRFM_7L,8C,40) (nMRFM_17,19,23,25,34) The label attachment using permanent adhesive. The label will neither peel off nor fade during the expected lifespan. 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 6 Sub-Band Model Name FCC WARNING 문구 (Band 구분 있음) 7L nLRFM_7L nMRFM_7L nHRFM_7L 8C nLRFM_8C nMRFM_8C nHRFM_8C 17 nLRFM_17 nMRFM_17 nHRFM_17 19 nLRFM_19 nMRFM_19 nHRFM_19 23 nLRFM_23 nMRFM_23 nHRFM_23 25 nLRFM_25 nMRFM_25 nHRFM_25 34 nLRFM_34 nMRFM_34 nHRFM_34 40 nLRFM_40 nMRFM_40 nHRFM_40 Sub-Band Model Name FCC WARNING 문구 (Band 구분 없음) 7L nLRFM_7L nMRFM_7L nHRFM_7L 8C nLRFM_8C nMRFM_8C nHRFM_8C 17 nLRFM_17 nMRFM_17 nHRFM_17 19 nLRFM_19 nMRFM_19 nHRFM_19 23 nLRFM_23 nMRFM_23 nHRFM_23 25 nLRFM_25 nMRFM_25 nHRFM_25 34 nLRFM_34 nMRFM_34 nHRFM_34 40 nLRFM_40 nMRFM_40 nHRFM_40 nXRFM명판 통합건 검토 FCC WARNING 문구FCC선언 문구 THANK YOU! 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다.
- Band = - Transmitting frequency = MHz ~ MHz mm dBi =Maximum power density Numeric power gain of the antenna Maximum power with turn-up toler ance Distance from transmitting antenna 2 FCC ID : W6UNMRFM17 Maximum Permissible Ex posure(MPE) evaluation January 23, 2026 AWS13 - Min. test separation distance = 3600 2110 2190 - Max. Antenna Gain = 17 - Max. power with turn-up tolerance = 35.00 3162.3 mW dBm S = P G / ( 4 R 2 π) , ㎽/㎝ 2 S = G = P = R = = 0. 097317 ㎽/㎝ 2 Conclusion: The exposure condition of this device is compliant with FCC rul es. The limit for maximum permi ssible exposure = 1.000000 ㎽/㎝ Copyright ⓒ 2026, UL Korea, Ltd.
CERTIFICATION TEST REPORT Report Number. : U-4792013161-FR4V3 Applicant : SOLiD, Inc. 10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Model : nMRFM_17 FCC ID : W6UNMRFM17 EUT Description : nGENESIS Test Standard(s) : FCC CFR47 PART 2 FCC CFR47 PART 27 Date Of Issue: 2026-02-18 Prepared by: UL KOREA LTD. 26th floor, 152, Teheran-ro, Gangnam-gu Seoul, 06236, Korea Uiwang Test Site: UL Korea, Ltd. Uiwang Laboratory 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea, TEL: (031) 389-9603 FAX: (031) 462-8355 REPORT NO: U-4792013161-FR4V3 DATE: 2026-02-18 FCC ID: W6UNMRFM17 Page 2 of 40 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si , Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Revision History Rev. Issue Date Revisions Revised By V1 2026-01-05 Initial issue Jungi Shin V2 2026-02-12 Updated to address TCB`s question Jungi Shin V3 2026-02-18 Updated to address TCB`s question Jungi Shin REPORT NO: U-4792013161-FR4V3 DATE: 2026-02-18 FCC ID: W6UNMRFM17 Page 3 of 40 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si , Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION .................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .................................................................................. 6 4.1. MEASURING INSTRUMENT CALIBRATION .................................................................. 6 4.2. SAMPLE CALCULATION ................................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY .................................................................................. 6 4.4. DECISION RULE ............................................................................................................. 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT .................................................................................................. 7 5.2. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................. 7 5.3. WORST-CASE ORIENTATION ....................................................................................... 8 5.4. DESCRIPTION OF TEST SETUP ................................................................................... 9 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. SUMMARY TABLE ............................................................................................................. 10 8. CONDUCTED RESULTS .................................................................................................... 12 8.1. AGC THRESHOLD ........................................................................................................ 12 8.2. OUT-OF-BAND REJECTION ......................................................................................... 14 8.2.1. OUT-OF-BAND REJECTION TEST PLOT............................................................ 15 8.3. INPUT-VERSUS-OUTPUT SIGNAL COMPARISON .................................................... 16 8.3.1. INPUT-VERSUS-OUTPUT SIGNAL COMPARISON TEST PLOT ....................... 18 8.4. INPUT/OUTPUT POWER AND AMPLIFIER/BOOSTER GAIN ..................................... 20 8.4.1. OUTPUT POWER AND PARR TEST PLOT ......................................................... 23 8.5. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS AND SPURIOUS EMISSIONS ........... 25 8.5.1. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS PLOT .......................................... 28 8.5.2. CONDUCTED SPURIOUS EMISSIONS PLOT .................................................... 30 9. RADIATED RESULTS ........................................................................................................ 36 9.1. RADIATED SPURIOUS EMISSIONS ............................................................................ 36 9.1.1. RADIATED SPURIOUS TEST RESULTS (ABOVE 1GHz) ................................... 37 9.1.2. RADIATED SPURIOUS TEST RESULTS (BELOW 1GHz) .................................. 39 9.1.3. RADIATED SPURIOUS TEST RESULTS (BELOW 30MHz) ................................ 40 REPORT NO: U-4792013161-FR4V3 DATE: 2026-02-18 FCC ID: W6UNMRFM17 Page 4 of 40 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si , Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SOLiD, Inc. EUT DESCRIPTION: nGENESIS MODEL NUMBER: nMRFM_17 SERIAL NUMBER: Identical prototype DATE TESTED: 2025-10-03 - 2025-12-30 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 2 FCC PART 27 Complies Complies UL KOREA LTD. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL KOREA LTD. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating…
Text truncated - open the document above for the full version.
REPORT NO: U-4792013161-FR4V3 DATE: 2026-02-18 FCC ID: W6UNMRFM17 Page 20 of 40 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si , Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 8.4. INPUT/OUTPUT POWER AND AMPLIFIER/BOOSTER GAIN RULE PART(S) FCC: §2.1046, §27.50 LIMITS § 2.1046 Measurements required: RF power output. (a) For transmitters other than single sideband, independent sideband and controlled carrier radiotelephone, power output shall be measured at the RF output terminals when the transmitter is adjusted in accordance with the tune-up procedure to give the values of current and voltage on the circuit elements specified in §2.1033(c)(8). The electrical characteristics of the radio frequency load attached to the output terminals when this test is made shall be stated. (b) For single sideband, independent sideband, and single channel, controlled carrier radiotelephone transmitters the procedure specified in paragraph (a) of this section shall be employed and, in addition, the transmitter shall be modulated during the test as specified and applicable in § 2.1046 (b) (1-5). In all tests, the input level of the modulating signal shall be such as to develop rated peak envelope power or carrier power, as appropriate, for the transmitter. (c) For measurements conducted pursuant to paragraphs (a) and (b) of this section, all calculations and methods used by the applicant for determining carrier power or peak envelope power, as appropriate, on the basis of measured power in the radio frequency load attached to the transmitter output terminals shall be shown. Under the test conditions specified, no components of the emission spectrum shall exceed the limits specified in the applicable rule parts as necessary for meeting occupied bandwidth or emission limitations. § 27.50 Power limits and duty cycle. (d) The following power and antenna height requirements apply to stations transmitting in the 1695- 1710 MHz, 1710-1755 MHz, 1755-1780 MHz, 1915-1920 MHz, 1995-2000 MHz, 2000-2020 MHz, 2110-2155 MHz, 2155-2180 MHz and 2180-2200 MHz bands: (1) The power of each fixed or base station transmitting in the 1995-2000 MHz, 2110-2155 MHz, 2155-2180 MHz or 2180-2200 MHz band and located in any county with population density of 100 or fewer persons per square mile, based upon the most recently available population statistics from the Bureau of the Census, is limited to: (i) An equivalent isotropically radiated power (EIRP) of 3280 watts when transmitting with an emission bandwidth of 1 MHz or less; (ii) An EIRP of 3280 watts/MHz when transmitting with an emission bandwidth greater than 1 MHz. (2) The power of each fixed or base station transmitting in the 1995-2000 MHz, the 2110-2155 MHz 2155-2180 MHz band, or 2180-2200 MHz band and situated in any geographic location other than that described in paragraph (d)(1) of this section is limited to: (i) An equivalent isotropically radiated power (EIRP) of 1640 watts when transmitting with an emission bandwidth of 1 MHz or less; (ii) An EIRP of 1640 watts/MHz when transmitting with an emission bandwidth greater than 1 MHz. (3) A licensee operating a base or fixed station in the 2110-2155 MHz band utilizing a power greater than 1640 watts EIRP and greater than 1640 watts/MHz EIRP must coordinate such operations in advance with all Government and non-Government satellite entities in the 2025-2110 MHz band. A licensee operating a base or fixed station in the 2110-2180 MHz band utilizing power greater than 1640 watts EIRP and greater than 1640 watts/MHz EIRP must be coordinated in advance with the following licensees authorized to operate within 120 kilometers (75 miles) of the base or fixed station operating in this band: All Broadband Radio Service (BRS) licensees authorized under this part in the 2155-2160 MHz band and all advanced wireless services (AWS) licensees authorized to operate on adjacent frequency blocks in the 2110-2180 MHz band. (4) Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band and mobile and portable stations operating in the 1695-1710 MHz and 1755-1780 MHz bands are limited to 1 watt EIRP. Fixed stations operating in the 1710-1755 MHz band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in REPORT NO: U-4792013161-FR4V3 DATE: 2026-02-18 FCC ID: W6UNMRFM17 Page 21 of 40 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si , Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd these bands must employ a means for limiting power to the minimum necessary for successful communications. (5) Equipment employed must be authorized in accordance with the provisions of § 24.51. Power measurements for transmissions by stations authorized under this section may be made either in accordance with a Commission-approved average power technique or in compliance with paragraph (d)(6) of this section. In measuring transmissions in this band using an average power technique, the peak-to -average ratio (PAR) of the transmission may not exceed 13 dB. (6) Peak transmit power must be measured over any interval of continuous transmission using instrumentation calibrated in terms of an rms-equivalent voltage. The measurement results shall be properly adjusted for any instrument limitations, such as detector response times, limited resolution bandwidth capability when compared to the emission bandwidth, sensitivity, etc., so as to obtain a true peak measurement for the emission in question over the full bandwidth of the channel. (7) Fixed, mobile, and portable (hand-held) stations operating in the 2000-2020 MHz band are limited…
Text truncated - open the document above for the full version.
800 Klein Rd, Suite 200 · Plano, 75044 · United States
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 1 | 27 | 2.11 GHz - 2.19 GHz | 2.66 W | G7W | Amp |
| 2 | 27 | 2.11 GHz - 2.19 GHz | 2.66 W | D7W | Amp |
Equipment Class
B9B - Part 90 Class B Industrial Booster (non-SMR)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)