Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Date: 2/11/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: W6UNMRFM7L Grantee FRN: 0018550988 SOLiD, Inc. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: FCC FRN: 0034264838 Contact Person: Ryan Oliveira Company Name: Solid Gear, Inc. Company Address: 800 Klein Rd, Suite 200, Plano TX 75044, U.S.A Email: [email protected] Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Date: 2/10/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: W6UNMRFM7L ATTESTATION With respect to section IV (d) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages will be shown in online and point-of-sale marketing materials and on outside packaging of device. ⚫ For frequency bands under “Industrial (Part 20) Signal Booster”: With respect to section IV (d) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages will be shown in online and point-of-sale marketing materials and on outside packaging of device. ⚫ For frequency bands under “Part 90 Signal Booster”: With respect to section V (g) of 935210 D02 Signal Booster Certification v04r03, we confirm the signal booster warning label messages and Class A/B disclosure will be also shown in online and point-of-sale marketing materials and on outside packaging of device. Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Date: 1/23/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: W6UNMRFM7L 1. SOLiD, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. SOLiD, Inc. (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. SOLiD, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
1 Date: 2/11/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: W6UNMRFM7L Grantee FRN: 0018550988 To whom it may concern: FCC US Agent Agent Company Name: Solid Gear, Inc. FCC FRN: 0034264838 Agent Contact Name: Ryan Oliveira Agent US Address: 800 Klein Rd, Suite 200, Plano TX 75044, U.S.A Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of SOLiD, Inc. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, Ryan Oliveira Senior Product Line Manager Solid Gear, Inc.
CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 1/23/2026 To Whom It May Concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, SOLiD, Inc. requests confidentiality for the following products: FCC ID: W6UNMRFM7L The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request • Schematic • Block Diagram • Operational description • Part List We request that the following information submitted be held short-term confidential treatment for 180 days. Short- term Confidential Request • Internal Photos • External Photos • Test-Setup Photos • User’s Manual If you have any questions, please feel free to contact me at the address shown below. Best regards, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Date: 1/23/2026 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: Yong chul Kim Job Title: Manage Company Name: SOLiD, Inc.
Declaration on KDB935210 D02 technical requirements applicability Hereafter analysis on technical requirements cited in KDB 935210 D02 (v04r03), section V, bullet points (j) and (k), to highlight which were considered and evaluated, because applicable, within Part 90 scope and which not. Bullet point (j): sub-point (1): neither considered nor evaluated because it is not applicable because 5W ERP limit is to be verified at the time of installation, whereas output power evaluation in reports was carried out at antenna connector’s level. sub-point (2): neither considered nor evaluated because EUT does not work on 800 MHz band. sub-point (3): neither considered nor evaluated because EUT does not work on 800 MHz NSPAC Public Safety Band (851-854 MHz downlink; 806-809 MHz uplink). sub-point (4): neither considered nor evaluated because EUT does not work on 900 MHz band. sub-point (5): considered and evaluated, alternative was implemented for noise figure test, please refer to RF report. sub-point (6): considered and evaluated because EUT works also on 758-768 MHz band, for references see related Application Form 731, compiled for current certification. Bullet point (k): sub-point (1): considered and evaluated because EUT works also on 758-768 MHz band, please refer to RF report. sub-point (2): neither considered nor evaluated because it is not applicable as it is equipment installation/operation requirement, not a certification requirement. sub-point (3): sub-point (i): considered and evaluated because EUT works also on 758-768 MHz band, please refer to RF report. sub-point (ii): neither considered nor evaluated because it is not applicable as EUT does not work in PS NB spectrum (769-775 MHz or 799-805 MHz).
SOLiD 본문서의저작권은SOLiD에있으며, 허가없는무단전재와재배포등사외반출을금지합니다. Phoenix 개발팀 nGENESISFCC Label_Phoenix 본문서의저작권은SOLiD에있으며, 허가없는무단전재와재배포등사외반출을금지합니다. 2 History Rev No.DataPage변경내용비고 V0.126.01.13초안 V0.226.02.04Rainproof추가및오타수정 본문서의저작권은SOLiD에있으며, 허가없는무단전재와재배포등사외반출을금지합니다. 3 nMRFM명판통합건검토(1/2) 베트남 생산 한국 생산 NAME PLATE Product : SOLiD GENESIS ® Model : nMRFM_7L Made in KOREA Product : SOLiD GENESIS ® Model : nMRFM_8C Product : SOLiD GENESIS ® Model : nMRFM_17 Product : SOLiD GENESIS ® Model : nMRFM_19 Product : SOLiD GENESIS ® Model : nMRFM_23 Product : SOLiD GENESIS ® Model : nMRFM_25 FCC ID : W6UNMRFM7L Made in KOREA FCC ID : W6UNMRFM8C Made in KOREA FCC ID : W6UNMRFM17 Made in KOREA FCC ID : W6UNMRFM19 Made in KOREA FCC ID : W6UNMRFM23 Made in KOREA FCC ID : W6UNMRFM25 Product : SOLiD GENESIS ® Model : nMRFM_7L Made in Vietnam Product : SOLiD GENESIS ® Model : nMRFM_8C Product : SOLiD GENESIS ® Model : nMRFM_17 Product : SOLiD GENESIS ® Model : nMRFM_19 Product : SOLiD GENESIS ® Model : nMRFM_23 Product : SOLiD GENESIS ® Model : nMRFM_25 FCC ID : W6UNMRFM7L Made in Vietnam FCC ID : W6UNMRFM8C Made in Vietnam FCC ID : W6UNMRFM17 Made in Vietnam FCC ID : W6UNMRFM19 Made in Vietnam FCC ID : W6UNMRFM23 Made in Vietnam FCC ID : W6UNMRFM25 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 4 nMRFM명판 통합건 검토 (2/2) 베트남 생산 한국 생산 NAME PLATE Product : SOLiD GENESIS ® Model : nMRFM_34 Made in KOREA Product : SOLiD GENESIS ® Model : nMRFM_40 FCC ID : W6UNMRFM34 Made in KOREA FCC ID : W6UNMRFM40 Product : SOLiD GENESIS ® Model : nMRFM_34 Made in Vietnam Product : SOLiD GENESIS ® Model : nMRFM_40 FCC ID : W6UNMRFM34 Made in Vietnam FCC ID : W6UNMRFM40 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 5 FCC 선언 문구 부착위치FCC WARNING 문구 nMRFM_ 17, 19, 23, 25, 34, 40 nMRFM_ 7L, 8C nMRFM명판 부착 위치 예시 (nMRFM_7L,8C,40) (nMRFM_17,19,23,25,34) The label attachment using permanent adhesive. The label will neither peel off nor fade during the expected lifespan. 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다. 6 Sub-Band Model Name FCC WARNING 문구 (Band 구분 있음) 7L nLRFM_7L nMRFM_7L nHRFM_7L 8C nLRFM_8C nMRFM_8C nHRFM_8C 17 nLRFM_17 nMRFM_17 nHRFM_17 19 nLRFM_19 nMRFM_19 nHRFM_19 23 nLRFM_23 nMRFM_23 nHRFM_23 25 nLRFM_25 nMRFM_25 nHRFM_25 34 nLRFM_34 nMRFM_34 nHRFM_34 40 nLRFM_40 nMRFM_40 nHRFM_40 Sub-Band Model Name FCC WARNING 문구 (Band 구분 없음) 7L nLRFM_7L nMRFM_7L nHRFM_7L 8C nLRFM_8C nMRFM_8C nHRFM_8C 17 nLRFM_17 nMRFM_17 nHRFM_17 19 nLRFM_19 nMRFM_19 nHRFM_19 23 nLRFM_23 nMRFM_23 nHRFM_23 25 nLRFM_25 nMRFM_25 nHRFM_25 34 nLRFM_34 nMRFM_34 nHRFM_34 40 nLRFM_40 nMRFM_40 nHRFM_40 nXRFM명판 통합건 검토 FCC WARNING 문구FCC선언 문구 THANK YOU! 본 문서의 저작권은 SOLiD에 있으며, 허가없는 무단전재와 재배포 등 사외반출을 금지합니다.
- Band = MHz~MHz mm dBi = Maximum power densityNumeric power gain of the antenna Maximum power with turn-up toleranceDistance from transmitting antenna 2 ( f/1500 ) - Min. test separation distance =3600 FCC ID : W6UNMRFM7L Maximum Permissible Exposure(MPE) evaluation January 23, 2026 Lower 700 MHz - Transmitting frequency =729746 - Max. Antenna Gain = 17 - Max. power with turn-up tolerance =32.001584.9mWdBm S = P G / ( 4 R 2 π ) , ㎽/㎝ 2 S =G = P =R = Copyright ⓒ 2026, UL Korea, Ltd. = 0.048774 ㎽/㎝ 2 Conclusion:The exposure condition of this device is compliant with FCC rules. The limit for maximum permissible exposure = 0.486000 ㎽/㎝ - Band = MHz~MHz mm dBi = Maximum power densityNumeric power gain of the antenna Maximum power with turn-up toleranceDistance from transmitting antenna 2 ( f/1500 ) Copyright ⓒ 2026, UL Korea, Ltd. = 0.048774 ㎽/㎝ 2 Conclusion:The exposure condition of this device is compliant with FCC rules. The limit for maximum permissible exposure = 0.497333 ㎽/㎝ S = P G / ( 4 R 2 π ) , ㎽/㎝ 2 S =G = P =R = 1584.9mWdBm - Max. Antenna Gain = 17 - Max. power with turn-up tolerance =32.00 - Min. test separation distance =3600 FCC ID : W6UNMRFM7L Maximum Permissible Exposure(MPE) evaluation January 23, 2026 Upper 700 MHz - Transmitting frequency =746758 - Band = - Transmitting frequency =MHz~MHz mm dBi = Maximum power densityNumeric power gain of the antenna Maximum power with turn-up toleranceDistance from transmitting antenna 2 ( f/1500 ) Copyright ⓒ 2026, UL Korea, Ltd. = 0.048774 ㎽/㎝ 2 Conclusion:The exposure condition of this device is compliant with FCC rules. The limit for maximum permissible exposure = 0.505333 ㎽/㎝ S = P G / ( 4 R 2 π ) , ㎽/㎝ 2 S =G = P =R = 1584.9mWdBm - Max. Antenna Gain = 17 - Max. power with turn-up tolerance =32.00 - Min. test separation distance =3600 FCC ID : W6UNMRFM7L Maximum Permissible Exposure(MPE) evaluation January 23, 2026 FirstNet 758768
CERTIFICATION TEST REPORT Report Number. : U-4792013161-FR1V3 Applicant : SOLiD, Inc. 10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Model : nMRFM_7L FCC ID : W6UNMRFM7L EUT Description : nGENESIS Test Standard(s) : FCC CFR47 PART 2 FCC CFR47 PART 27 FCC CFR47 PART 90 Date Of Issue: 2026-02-12 Prepared by: UL KOREA LTD. 26th floor, 152, Teheran-ro, Gangnam-gu Seoul, 06236, Korea Uiwang Test Site: UL Korea, Ltd. Uiwang Laboratory 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea, TEL: (031) 389-9603 FAX: (031) 462-8355 REPORT NO: U-4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 2 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Revision History Rev. Issue Date Revisions Revised By V1 2026-01-05 Initial issue Jungi Shin V2 2026-02-11 Updated to address TCB`s question Jungi Shin V3 2026-02-12 Updated to address TCB`s question Jungi Shin REPORT NO: U-4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 3 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION .................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .................................................................................. 6 4.1. MEASURING INSTRUMENT CALIBRATION .................................................................. 6 4.2. SAMPLE CALCULATION ................................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY .................................................................................. 6 4.4. DECISION RULE ............................................................................................................. 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT .................................................................................................. 7 5.2. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................. 7 5.3. WORST-CASE ORIENTATION ....................................................................................... 8 5.4. DESCRIPTION OF TEST SETUP ................................................................................... 9 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. SUMMARY TABLE ............................................................................................................. 11 8. CONDUCTED RESULTS .................................................................................................... 12 8.1. AGC THRESHOLD ........................................................................................................ 12 8.2. OUT-OF-BAND REJECTION ......................................................................................... 14 8.2.1. OUT-OF-BAND REJECTION TEST PLOT............................................................ 15 8.3. INPUT-VERSUS-OUTPUT SIGNAL COMPARISON .................................................... 17 8.3.1. INPUT-VERSUS-OUTPUT SIGNAL COMPARISON TEST PLOT ....................... 19 8.4. INPUT/OUTPUT POWER AND AMPLIFIER/BOOSTER GAIN ..................................... 27 8.4.1. OUTPUT POWER AND PARR TEST PLOT ......................................................... 32 8.5. NOISE FIGURE ............................................................................................................. 37 8.6. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS AND SPURIOUS EMISSIONS ........... 39 8.6.1. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS PLOT .......................................... 43 8.6.2. CONDUCTED SPURIOUS EMISSIONS PLOT .................................................... 48 9. RADIATED RESULTS ........................................................................................................ 63 9.1. RADIATED SPURIOUS EMISSIONS ............................................................................ 63 9.1.1. RADIATED SPURIOUS TEST RESULTS (ABOVE 1GHz) ................................... 64 9.1.2. RADIATED SPURIOUS TEST RESULTS (BELOW 1GHz) .................................. 68 9.1.3. RADIATED SPURIOUS TEST RESULTS (BELOW 30MHz) ................................ 71 REPORT NO: U-4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 4 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SOLiD, Inc. EUT DESCRIPTION: nGENESIS MODEL NUMBER: nMRFM_7L SERIAL NUMBER: Identical prototype DATE TESTED: 2025-10-03 - 2026-02-10 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 2 FCC PART 27 FCC PART 90 Complies Complies Complies UL KOREA LTD. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL KOREA LTD. based on interpretations and/or observations of test results. Measurement U…
Text truncated - open the document above for the full version.
REPORT NO: U-4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 39 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd 8.6. OUT-OF-BAND/OUT-OF-BLOCK EMISSIONS AND SPURIOUS EMISSIONS RULE PART(S) FCC: §2.1051, §27.53 LIMITS § 2.1051 Measurements required: Spurious emissions at antenna terminals. The radio frequency voltage or powers generated within the equipment and appearing on a spurious frequency shall be checked at the equipment output terminals when properly loaded with a suitable artificial antenna. Curves or equivalent data shall show the magnitude of each harmonic and other spurious emission that can be detected when the equipment is operated under the conditions specified in §2.1049 as appropriate. The magnitude of spurious emissions which are attenuated more than 20 dB below the permissible value need not be specified. § 27.53 Emission limits. (c) For operations in the 746-758 MHz band and the 776-788 MHz band, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following: (1) On any frequency outside the 746-758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB; (2) On any frequency outside the 776-788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB; (3) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations; (4) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations; (5) Compliance with the provisions of paragraphs (c)(1) and (c)(2) of this section is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater. However, in the 100 kHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of at least 30 kHz may be employed; (6) Compliance with the provisions of paragraphs (c)(3) and (c)(4) of this section is based on the use of measurement instrumentation such that the reading taken with any resolution bandwidth setting should be adjusted to indicate spectral energy in a 6.25 kHz segment. (f) For operations in the 746-758 MHz, 775-788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to −70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and −80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. For the purpose of equipment authorization, a transmitter shall be tested with an antenna that is representative of the type that will be used with the equipment in normal operation. (g) For operations in the 600 MHz band and the 698-746 MHz band, the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. Compliance with this provision is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kilohertz or greater. However, in the 100 kilohertz bands immediately outside and adjacent to a licensee's frequency block, a resolution bandwidth of at least 30 kHz may be employed. § 90.543 Emission limitations. Transmitters designed to operate in 769-775 MHz and 799-805 MHz frequency bands must meet the emission limitations in paragraphs (a) through (d) of this section. Class A and Class B signal boosters retransmitting signals in the 769-775 MHz and 799-805 MHz frequency bands are exempt from the limits listed in paragraph (a) of this section when simultaneously retransmitting multiple signals and instead shall be subject to the limit listed in paragraph (c) of this section when operating in this manner. REPORT NO: U-4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 40 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Transmitters operating in 758-768 MHz and 788-798 MHz bands must meet the emission limitations in (e) of this section. (c) Out-of-band emission limit. On any frequency outside of the frequency ranges covered by the ACP tables in this section, the power of any emission must be reduced below the mean output power (P) by at least 43 + 10log (P) dB measured in a 100 kHz bandwidth for frequencies less than 1 GHz, and in a 1 MHz bandwidth for frequencies greater than 1 GHz. (e) For operations in the 758-768 MHz and the 788-798 MHz bands, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following: (1) On all frequencies between 769-775 MHz and 799-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations. (2) On all frequencies between 769-775 MHz and 799-805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations. (3) On any frequency between 775-788 MHz, above 805 MHz, and below 758 MHz, by at least 43 + 10 log (P) dB. (4) Compliance with the provisions of paragraphs (e)(1) and (2) of this section is based on the use of measurement instrumentation such that the…
Text truncated - open the document above for the full version.
REPORT NO: U- 4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 57 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Upper 700MHz / Broadband / Low channel § 27.53 (c)(3) & (f) REPORT NO: U- 4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 58 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Upper 700MHz / Broadband / Mid channel § 27.53 (c)(3) & (f) REPORT NO: U- 4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 59 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Upper 700MHz / Broadband / High channel § 27.53 (c)(3) & (f) REPORT NO: U- 4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 60 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Firstnet / CW / Low channel § 90.543 (e)(1) § 90.543 (f) REPORT NO: U- 4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 61 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Firstnet / CW / Mid channel § 90.543 (e)(1) § 90.543 (f) REPORT NO: U- 4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 62 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL KOREA LTD. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd Firstnet / CW / High channel § 90.543 (e)(1) § 90.543 (f) REPORT NO: U-4792013161-FR1V3 DATE: 2026-02-12 FCC ID: W6UNMRFM7L Page 63 of 73 UL Korea, Ltd. Uiwang Laboratory FORM ID: FCC_15C(05) 42, Obongsandan 1-ro, Uiwang-si, Gyeonggi-do, Republic of Korea TEL: (031) 389-9603 FAX: (031) 462-8355 UL…
Text truncated - open the document above for the full version.
800 Klein Rd, Suite 200 · Plano, 75044 · United States
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 1 | 27 | 729 MHz - 746 MHz | 1.33 W | G7W | Amp |
| 2 | 27 | 729 MHz - 746 MHz | 1.33 W | D7W | Amp |
| 3 | 27 | 746 MHz - 758 MHz | 1.34 W | G7W | Amp |
| 4 | 27 | 746 MHz - 758 MHz | 1.34 W | D7W | Amp |
Equipment Class
B9B - Part 90 Class B Industrial Booster (non-SMR)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)nGENESIS
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)