W74-V248919Bi-Directional Amplifier

User manual for software definable repeater Network Vision Passion for the Mission User manual for Software Definable Repeater Proprietary and Strictly Confidential 1 User Manual for Vision24 < Software Definable Repeater > Copyright © 2012 SYM Technology Incorporated. All rights reserved. This product is intended only for installation in a RESTRICTED ACCESS LOCATION and is designed to operate within the Normal Operating (typical operating) ranges or conditions specified in this document. Operation of this equipment beyond the specified ranges in this document may cause: 1. Spurious emissions that violate regulatory requirements. 2. The equipment to be automatically removed from service when maximum thresholds are exceeded. 3. The equipment to not perform in accordance with its specifications. It is the operator's responsibility to ensure this equipment is properly installed and operated within SYM Technology operating specifications to obtain proper performance from the equipment and to comply with regulatory requirements. For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device shall be incorporated in the building installation wiring. Document No.: Date: August 17, 2012 Version: 2.3 User Manualfor Vision24 Copyright ⓒ 2012 SYM Technology, Inc. All rights reserved. 2 Warnings, Cautions, and Notes Warnings, Cautions, and Notes are found throughout this manual where applicable. The associated icons are used to quickly identify a potential condition that could result in the consequences described below if precautions are not taken. Notes clarify and provide additional information to assist the user. WARNING: This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical and RF circuitry and be familiar with standard practices for preventing accidents. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Working with the repeater while in operation, may expose the technician to RF electromagnetic fields that exceed FCC rules for human exposure. CAUTION: This caution symbol means user to be careful. In this situation, the user might do something that could result in equipment damage or loss of data. Use the attached specified power‐suply cord. If any another unapproved cord is used, it may cause interference to the equipment. To prevent electric shock, do not use other plug with an extension cord. NOTE: This note symbol means user to take note. Notes contain helpful suggestions or references to material not covered in the document. Procedures are not contained in notes. Information in this document is subject to change without notice. Please send comments to: E‐Mail: [email protected] Phone: (626) 356‐0817 Fax: (626) 356‐9087 Address: SYM Technology, Inc. 234 E. Colorado Blvd., Suite 410 Pasadena, CA 91101, USA http://www.symtechnology.com User manual for Software Definable Repeater Proprietary and Strictly Confidential 3 Revision History Date Version Approval Description FEB. 3, 2012 1.0 Document Release FEB. 22, 2012 1.1 Web GUI change APR. 1, 2012 2.0 Enclosure and Service Card hardware change July 18, 2012 2.1 User manual title changed into Vision24 July 24, 2012 2.2 Safety instruction added Aug 17, 2012 2.3 Photos are replaced Document No.: Date: August 17, 2012 Version: 2.3 User Manualfor Vision24 Copyright ⓒ 2012 SYM Technology, Inc. All rights reserved. 4 Table of Contents Warnings, Cautions, and Notes ...................................................................................................... 2 Revision History .............................................................................................................................. 3 1. Introduction ............................................................................................................................. 8 1.1 Product Description ...................................................................................................................... 8 1.2 Contents of Box ............................................................................................................................. 9 1.3 Glance at the Vision .................................................................................................................... 11 1.4 System Configuration and Technical ........................................................................................... 11 2. Installation ............................................................................................................................. 18 2.1 Unpaking and Inspection ............................................................................................................ 18 2.2 Installation Considerations ......................................................................................................... 18 2.3 Wall Mounting Procedure ........................................................................................................... 21 2.4 Rack Mounting Procedure ........................................................................................................... 22 2.5 Electrical Installation ................................................................................................................... 25 2.5.1 Grounding ............................................................................................................................ 25 2.5.2 Connection of the Antenna Cables ...................................................................................... 26 2.5.3 AC Power Connection .......................................................................................................... 27 2.5.4 Ethernet Connection ............................................................................................................ 27 3. Operation ..........................................................................…

Text truncated - open the document above for the full version.

SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 87 of 103 FCC Part 24E Test Report 12 EXHIBIT C - EUT PHOTOGRAPHS 12.1 EUT-Main Frame Enclosure Front View 12.2 EUT-Main Frame Enclosure Rear View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 88 of 103 FCC Part 24E Test Report 12.3 EUT-Main Frame Enclosure Top View 12.4 EUT-Main Frame Enclosure Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 89 of 103 FCC Part 24E Test Report 12.5 EUT-Main Frame Enclosure Left Side View 12.6 EUT-Main Frame Enclosure Right Side View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 90 of 103 FCC Part 24E Test Report 12.7 EUT-Main Frame Enclosure Open View 1 12.8 EUT-Main Frame Enclosure Open View 2 SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 91 of 103 FCC Part 24E Test Report 12.9 Vision24 1900MHz Service Card Front View 12.10 Vision24 1900MHz Service Card Rear View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 92 of 103 FCC Part 24E Test Report 12.11 Vision24 1900MHz Service Card Top View 12.12 Vision24 1900MHz Service Card Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 93 of 103 FCC Part 24E Test Report 12.13 Vision24 Filter and Combiner BTS Front View 12.14 Vision24 Filter and Combiner BTS Rear View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 94 of 103 FCC Part 24E Test Report 12.15 Vision24 Filter and Combiner Mobile Front View 12.16 Vision24 Filter and Combiner Mobile Rear View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 95 of 103 FCC Part 24E Test Report 12.17 Vision24 Rectifier (Power Supply) Front View 12.18 Vision24 Network Controller Front View

SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 83 of 103 FCC Part 24E Test Report 10 EXHIBIT A - FCC ID LABELING REQUIREMENTS 10.1 FCC ID Label Requirement FCC § 2.925 Identification of equipment (a) Each equipment covered in an application for equipment authorization shall bear a nameplate or label listing the following: (1) FCC Identifier consisting of the two elements in the exact order specified in §2.926. The FCC Identifier shall be preceded by the term FCC ID in capital letters on a single line, and shall be of a type size large enough to be legible without the aid of magnification. Example: FCC ID XXX123. XXX—Grantee Code 123—Equipment Product Code 10.2 FCC ID Label Content 10.3 FCC Label Location on EUT FCC ID: XXX-XXXXXX Label here

SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 96 of 103 FCC Part 24E Test Report 12.19 Vision24 1900MHz Service Card Digital Unit PCB Top View 12.20 Vision24 1900MHz Service Card Digital Unit PCB Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 97 of 103 FCC Part 24E Test Report 12.21 Vision24 1900MHz Service Card RF Unit Shielded View 12.22 Vision24 1900MHz Service Card RF Unit PCB Top View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 98 of 103 FCC Part 24E Test Report 12.23 Vision24 1900MHz Service Card RF Unit PCB Bottom View 12.24 Vision24 1900MHz Service Card HPA Shielded View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 99 of 103 FCC Part 24E Test Report 12.25 Vision24 1900MHz Service Card HPA PCB Top View 12.26 Vision24 1900MHz Service Card HPA PCB Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 100 of 103 FCC Part 24E Test Report 12.27 Main Frame PCB 1 Top View 12.28 Main Frame PCB 1 Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 101 of 103 FCC Part 24E Test Report 12.29 Main Frame PCB 2 Top View 12.30 Main Frame PCB 2 Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 102 of 103 FCC Part 24E Test Report 12.31 Vision24 Rectifier PCB Top View 12.32 Vision24 Rectifier PCB Bottom View SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 103 of 103 FCC Part 24E Test Report 12.33 Vision24 Network Controller PCB Top View 12.34 Vision24 Network Controller PCB Bottom View --- END OF REPORT ---

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.3) FCC PART 24E TEST AND MEASUREMENT REPORT For SYM Technology, Inc. 234 E. Colorado Blvd., STE 410 Pasadena, CA 91101 FCC ID: W74-V248919 Report Type: Original Report Product Type: Bi-Directional Amplifier Test Engineer: Lionel Lara Report Number: R12043013-24 Report Date: 2012-08-06 Reviewed By: Victor Zhang EMC/RF Lead Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732 9164 SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 2 of 103 FCC Part 24E Test Report TABLE OF CONTENTS 1 GENERAL INFORMATION ............................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)........................................................................... 5 1.2 MECHANICAL DESCRIPTION.............................................................................................................................. 5 1.3 OBJECTIVE......................................................................................................................................................... 5 1.4 RELATED SUBMITTAL(S)/GRANT(S)................................................................................................................... 5 1.5 TEST METHODOLOGY........................................................................................................................................ 5 1.6 MEASUREMENT UNCERTAINTY.......................................................................................................................... 6 1.7 TEST FACILITY................................................................................................................................................... 6 2 SYSTEM TEST CONFIGURATION .................................................................................................................. 7 2.1 JUSTIFICATION................................................................................................................................................... 7 2.2 EUT EXERCISE SOFTWARE................................................................................................................................7 2.3 EQUIPMENT MODIFICATIONS............................................................................................................................. 7 2.4 EUT HOST INTERNAL CONFIGURATION............................................................................................................. 7 2.5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS.............................................................................................. 7 2.6 INTERFACE PORTS AND CABLING...................................................................................................................... 8 3 SUMMARY OF TEST RESULTS........................................................................................................................ 9 4 FCC §2.1046 & §24.232 – RF OUTPUT POWER............................................................................................. 10 4.1 APPLICABLE STANDARD.................................................................................................................................. 10 4.2 TEST PROCEDURE............................................................................................................................................ 10 4.3 TEST ENVIRONMENTAL CONDITIONS............................................................................................................... 10 4.4 TEST EQUIPMENT LIST AND DETAILS.............................................................................................................. 10 4.5 TEST RESULTS................................................................................................................................................. 11 5 FCC §2.1049 & §24.238 - OCCUPIED BANDWIDTH .................................................................................... 14 5.1 APPLICABLE STANDARD.................................................................................................................................. 14 5.2 TEST PROCEDURE............................................................................................................................................ 14 5.3 TEST ENVIRONMENTAL CONDITIONS............................................................................................................... 14 5.4 TEST EQUIPMENT LIST AND DETAILS.............................................................................................................. 14 5.5 TEST RESULTS................................................................................................................................................. 15 6 FCC §2.1053 & §24.238 - SPURIOUS RADIATED EMISSIONS................................................................... 43 6.1 APPLICABLE STANDARD.................................................................................................................................. 43 6.2 TEST PROCEDURE............................................................................................................................................ 43 6.3 TEST ENVIRONMENTAL CONDITIONS............................................................................................................... 43 6.4 TEST EQUIPMENT LIST AND DETAILS..............................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.3) FCC PART 90 TEST AND MEASUREMENT REPORT For SYM Technology, Inc. 234 E. Colorado Blvd., STE 410 Pasadena, CA 91101 FCC ID: W74-V248919 Report Type: Original Report Product Type: Bi-Directional Amplifier Test Engineer: Lionel Lara Report Number: R12043013-90 Report Date: 2012-08-07 Reviewed By: Victor Zhang EMC/RF Lead Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732 9164 SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-90 Page 2 of 62 FCC Part 90 Test Report TABLE OF CONTENTS 1 GENERAL INFORMATION.............................................................................................................................. 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)........................................................................ 5 1.2 MECHANICAL DESCRIPTION........................................................................................................................... 5 1.3 OBJECTIVE...................................................................................................................................................... 5 1.4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................... 5 1.5 TEST METHODOLOGY..................................................................................................................................... 5 1.6 MEASUREMENT UNCERTAINTY...................................................................................................................... 6 1.7 TEST FACILITY............................................................................................................................................... 6 2 SYSTEM TEST CONFIGURATION ................................................................................................................. 7 2.1 JUSTIFICATION................................................................................................................................................ 7 2.2 EUT EXERCISE SOFTWARE............................................................................................................................. 7 2.3 EQUIPMENT MODIFICATIONS.......................................................................................................................... 7 2.4 LOCAL SUPPORT EQUIPMENT AND SOFTWARE LIST AND DETAILS................................................................. 7 2.5 EUT HOST INTERNAL CONFIGURATION......................................................................................................... 7 2.6 INTERFACE PORTS AND CABLES..................................................................................................................... 7 3 SUMMARY OF TEST RESULTS ...................................................................................................................... 8 4 FCC §2.1046 & §90.635 – RF OUTPUT POWER ............................................................................................. 9 4.1 APPLICABLE STANDARD................................................................................................................................. 9 4.2 TEST PROCEDURE........................................................................................................................................... 9 4.3 TEST EQUIPMENT LIST AND DETAILS............................................................................................................. 9 4.4 TEST ENVIRONMENTAL CONDITIONS.............................................................................................................. 9 4.5 TEST RESULTS.............................................................................................................................................. 10 5 FCC §2.1049 – OCCUPIED BANDWIDTH .................................................................................................... 11 5.1 APPLICABLE STANDARD...............................................................................................................................11 5.2 TEST PROCEDURE......................................................................................................................................... 11 5.3 TEST EQUIPMENT LIST AND DETAILS........................................................................................................... 11 5.4 TEST ENVIRONMENTAL CONDITIONS............................................................................................................ 11 5.5 TEST RESULTS.............................................................................................................................................. 12 6 FCC §2.1051 & §90.691 – EMISSION MASK ................................................................................................. 17 6.1 APPLICABLE STANDARD...............................................................................................................................17 6.2 TEST PROCEDURE......................................................................................................................................... 17 6.3 TEST EQUIPMENT LIST AND DETAILS........................................................................................................... 17 6.4 TEST ENVIRONMENTAL CONDITIONS.........................................................................................................…

Text truncated - open the document above for the full version.

SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 84 of 103 FCC Part 24E Test Report 11 EXHIBIT B - TEST SETUP PHOTOGRAPHS 11.1 Radiated Emissions – Rear View (Below 1 GHz) 11.2 Radiated Emissions - Front View (Below 1 GHz) SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 85 of 103 FCC Part 24E Test Report 11.3 Radiated Emissions - Rear View (Above 1 GHz) 11.4 Radiated Emissions - Front View (Above 1 GHz) SYM Technology, Inc. FCC ID: W74-V248919 Report Number: R12043013-24 Page 86 of 103 FCC Part 24E Test Report 11.5 Bench Setup View