WA6I12111.77 Inch Feature Phone

Claro i1211 User Manual © 2014. All rights are reserved. No part of this document may be reproduced without permission. While all efforts have been made to ensure the accuracy of all the contents in this manual, we assume no liability for errors or omissions or statements of any kind in this manual, whether such errors or omissions or statements resulting from negligence, accidents, or any other cause. The contents of this manual are subject to change without notice. Protect our environment! We strive to produce products in compliance with global environmental standards. Please consult your local authorities for proper disposal. Note: User Manual is just to guide the user about the functionality of the phone. This does not seem any certificate of technology. Some functions may vary due to modifications and upgrade of software, or due to print mistake. 1. For your safety Read this simple guideline. Not following them may be dangerous or illegal. Read the complete user manual for further information. Do not switch your phone on when the use of wireless devices is prohibited or when the wireless device may cause interference or danger. Do not use your phone while driving. Follow relevant rules or regulations in hospitals and health care facilities. Switch your phone off near medical devices. Switch your phone off in aircraft. The radio signal from it may cause interference in signals of the aircraft. Switch your phone off near high-precision electronic devices. It may affect the performance of these devices. Do not attempt to disassemble your phone or its accessories. Only qualified personnel may service or repair the phone. Do not place your phone and its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a petrol pumps. Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance. Observe any laws or regulations on the use of phone. Respect others' privacy and legal rights when using your phone. Improper use will invalidate the warranty! These safety instructions also apply to original accessories. 2. Keypad Definition Key Definitions Left Soft key/ Right Soft key 1. Execute functions that the left-down/right-down corner indicator shows. 2. In the standby mode, press left soft key to enter main menu , press right soft key to access Contacts. Navigation Keys 1. In other modes, it is used as the navigation/direction key except for some special functions. 2. In standby mode, press navigation keys to enter shortcut functions. OK Key 1. In standby mode, press the key to enter main menu. 2. In other mode, press the key for confirmation. End Key/ Power Key 1. Mainly used as power on/off. 2. Press to return to standby screen in any interface. 3. End calls or reject incoming calls. Dial Key 1. Press this key to dial or receive an incoming call. 2. In standby mode, press this key to access Dialed calls. Number Keys 1. Use these keys to input numbers or letters. 2. In standby mode, long press the 0 key to turn on torch * Key 1. In standby mode, press left soft key and * key to lock or unlock keypad. # Key 1. In text editing interface, press # key to switch the text input method. 2. Press and hold # key to transfer the profile of General mode and Silent mode. 3. Getting started 3.1 Installing the SIM Cards, T-flash card and battery. 1) Remove the back cover and lift the battery away. 2) Insert the SIM card into the SIM card slot lightly with the corner cutting of the card aligning to the notch of the slot and the gold plate of the card facing downward, till it cannot be pushed further in. 3) To install the T-Flash card, open its latch, place its indented side downward, insert the card into the card slot, and then close the latch. 4) With the metallic contacts of the battery facing the metallic contacts in the battery slot, press the battery down until it locks into place，then fix its back cover. 3.2 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked.  Battery level indication:  Your mobile phone can monitor and display the battery state.  Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen.  When the battery energy is insufficient, the mobile phone prompts "Battery low".  A charging animation appears when the battery is being charged. When the charging is complete, the animation disappears.  Using a travel adapter:  Install the battery into the mobile phone before charging the battery.  Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted.  Insert the plug of the travel charger to an appropriate power outlet.  During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged.  It is normal when the battery is become hot during the charging period.  The battery icon does no longer flicker when the charging process ends.  Using the Battery The performance of a battery is subject to multiple factors: radio network configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use. To guarantee the optimal performance of your battery, please stick to the following rules:  Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging.  Power off the mobile phone before removing the battery.  The charging process lasts a longer time for a new battery or a battery not in use for long. If the battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a longer t…

Text truncated - open the document above for the full version.

Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 36 of 46 8 EUT Constructional Details Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 37 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 46

Label and label location Label location

Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 40 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 41 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 42 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 43 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 44 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 45 of 46 Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 46 of 46 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS14090081001 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: Verykool USA Inc Address of Applicant: 3636 Nobel Drive, Suite 325, San Diego, CA 92122 USA Equipment Under Test (EUT) Product Name: 1.77 Inch Feature Phone Model No.: i1211 Trade mark Verykool FCC ID: WA6I1211 Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 11 Oct., 2014 ~ 17 Oct., 2014 Test Result: Maximum Reported 1-g SAR (W/kg) Head: 0.72 Body: 0.419 Report No: CCIS14090081001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900810RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 103 2 Version Version No. Date Description 00 20 Oct., 2014 Original Prepared by: Date: 20 Oct., 2014 Report Clerk Reviewed by: Date: 20 Oct., 2014 Project Engineer Report No: CCIS14090081001 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900810RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 103 3 Contents 1 COVER PAGE ................................................................................................................................................... 1 2 VERSION ........................................................................................................................................................... 2 3 CONTENTS ....................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ............................................................................................................................. 5 5 GENERAL INFORMATION .............................................................................................................................. 6 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 6 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 6 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 7 5.4 ENVIRONMENT OF TEST SITE ......................................................................................................................................................... 7 5.5 TEST LOCATION ............................................................................................................................................................................. 7 6 INTRODUCTION ............................................................................................................................................... 8 6.1 INTRODUCTION ............................................................................................................................................................................... 8 6.2 SAR DEFINITION ............................................................................................................................................................................ 8 7 RF EXPOSURE LIMITS .................................................................................................................................... 9 7.1 UNCONTROLLED ENVIRONMENT ..................................................................................................................................................... 9 7.2 CONTROLLED ENVIRONMENT ......................................................................................................................................................... 9 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................... 9 8 SAR MEASUREMENT SYSTEM ................................................................................................................... 10 8.1 E-FIELD PROBE ........................................................................................................................................................................... 11 8.2 DATA ACQUISITION ELECTRONICS (DAE) .................................................................................................................................... 11 8.3 ROBOT ...............................................................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS14090080901 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT Applicant: Verykool USA Inc Address of Applicant: 3636 Nobel Drive, Suite 325, San Diego, CA 92122 USA Equipment Under Test (EUT) Product Name: 1.77 Inch Feature Phone Model No.: i1211 Trade mark: Verykool FCC ID: WA6I1211 Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part22 Subpart H FCC CFR Title 47 Part24 Subpart E Date of sample receipt: 25 Sep., 2014 Date of Test: 26 Sep., to 9 Oct., 2014 Date of report issued: 10 Oct., 2014 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 46 2. Version Version No. Date Description 00 10 Oct., 2014 Original Prepared by: Date: 10 Oct., 2014 Report Clerk Reviewed by: Date: 10 Oct., 2014 Project Engineer Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 46 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES .......................................................................................................................................................... 7 5.4 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................................... 7 5.5 TEST METHODOLOGY ............................................................................................................................................ 7 5.6 LABORATORY FACILITY .......................................................................................................................................... 7 5.7 LABORATORY LOCATION ....................................................................................................................................... 7 5.8 TEST INSTRUMENTS LIST ....................................................................................................................................... 7 6. SYSTEM TEST CONFIGURATION .......................................................................................................................... 9 6.1 EUT CONFIGURATION ........................................................................................................................................... 9 6.2 EUT EXERCISE ...................................................................................................................................................... 9 6.3 CONFIGURATION OF TESTED SYSTEM .................................................................................................................. 9 6.4 DESCRIPTION OF TEST MODES ............................................................................................................................. 9 6.5 CONDUCTED OUTPUT POWER ............................................................................................................................ 10 6.6 OCCUPY BANDWIDTH .......................................................................................................................................... 12 6.7 MODULATION CHARACTERISTIC .......................................................................................................................... 18 6.8 OUT OF BAND EMISSION AT ANTENNA TERMINALS .................…

Text truncated - open the document above for the full version.

Report No: CCIS14090080901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140900809RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 35 of 46 7 Test Setup Photo Radiated Spurious Emission