WQ8-DR2015PROFESSIONAL SCAN TOOL

AUTEL ® Email: [email protected] Web: www.autel.com [ Quick Reference Guide、 AutoLink AL2500 Thank you for purchasing Autel tool. This tool is manufactured to a high standard and will provide years of trou­ ble-free performance when used in accordance to these instructions and properly maintained. Getting Started @ IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Failure to use this unit correctly may cause damage and/or personal in」ury and will void the product warranty. AUTEL •·· 飞， ， -心...丛' '心义-••-" ＿ Search for Autel Link in the Google Play store or App Store to down­ load and install the app to your device, or scan the above QR code to download the Autel Link app. In Android system, you will be directed to Google Play, while iOS users will be directed to the App Store. Open the Autel Link app and tap Register in the middle of the screen. Follow the on-screen instructions to complete the registra­ tion. Log in with your registered email address/phone number and password ＠巳,�, 中一 On your device, tap Me > Device Manager> Binding Equipment, the device will automatically」umpto the next screen. Tap to scan the QR code imprinted on the AL2500 tool. After the scanning is complete and the serial number is automatically retrieved, tap the Bind Equipment button at the bottom of the screen to proceed. Tap the tool name — AL2500 to enter the next screen 凸 Connect the OBDII cable's 16-pin male adapter to the vehicle's Data Link Connector (DLC), which is generally located under the vehicle dashboard. The tool will be automatically powered on Your AL2500 is now ready to use. Tap the Connect Device button at the bottom of the screen to connect the device. Once connected successfully, tap the Firmware Upgrade button to update the firmware PROFESSIONAL SCAN TOOL Connect to the Vehicle 口 l 口 • Scan QR Code to visit our website at www.autel.com. • To update the firmware, please create an Autel ID and regis­ ter the product with device's serial number and password, which can be found by tapping the Setup > About buttons on the tool screen. • Connect the 0B011 cable's 16-pin male adapter to the vehi­ cle's Data Link Connector (DLC), which is generally located under the vehicle dashboard. • The tool will be automatically powered on. • Your AL2500 is now ready to use. Firmware Update Through the Maxi PC Suite Please download the Maxi PC Suite from www.autel.com > Support> Downloads> Autel Update Tools, and install to your Windows-based computer. 血— 11111111111111 - . • 1111删冒冒一 , e. 叩父一 屯 = 心 如 一. -- .. 凸l i_,....-...l ~ 心心血 心 如 C 一 三-记... • Connect the device with the computer using the USB cable. • Run the Maxi PC Suite. Select Update Mode in the tool. Wait for the Log In window to display. • Enter your Autel ID and password, tap Log In and wait for the Update window to display. If you forgot your password, click the Forgot Password? link to our website and retrieve your password. Or click Sign Up to create an Autel ID to continue. 切..心 -q一 • In the Update window, if update(s) is available, tap Update on the right side of the screen to update the firmware. • Tap the Installed tag and the list of installed programs will display. NOTE: The interfaces in this quick guide are for reference only. For service and support, please contact us. http://pro.autel.com / www.autel.com I [email protected] 0086-755-2267-2493 (China HQ) / 1-855-AUTEL-US (288-3587) (North America) 0049 (0) 6103-2000520 (Europe)/ +045 5948465 (APAC) / +971 585 002709 (IMEA) ©Autel Intelligent Technology Corp., Ltd. All Rights Reserved. FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving an tenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ＋ ＋ I ....: I.LI l l I I.LI Cle 二 I.LI I :::a:: 兰 云a..ocS ____. LL.J � c::, ....:..:; 启 户一 习 = 组勺 曰 乏 巳衾匕 刍 罕 1 I 2 A B C D E F 1 I 2 I 3 I 4 I 5 －－－－－－－－－ －－－－－－－－－－－－－－－－－－－－－ 颜色 DIM 0-6 6~30 30-120 120~300 注： AUTEL设计部不指定供应商。效果做到参考样品 一 致即可。 300~600 600~1200 >1200 ANG. I 3 I 4 I 5 I 6 I 7 8 REV POSITION DATE DESCRIPTION A ， B I 对折 C －－－－－－－－－ I D ， E I TITLE Sheetmetal Ma出imng AUTEL.: 道 Aut 通 el In科 te lli技 g en股tTe份chn有olo g 限Co公 r p .Lt司d 快速指引 0.05 010 DWGNO 0.10 酝 Are 妇 The r P a w i rooe n g n s And S peci fica u on DRAW: 汤 清 洪 UNIT'S: 190x264mm 0.15 0.15 Property Of AUTEL .And S hall A UT62060563 F 0.25 NOT Be Reproduced Cop�ed Or…

Text truncated - open the document above for the full version.

FCCID:WQ8-DR2015

LabelLocationOnEUT Label ProductName:PROFESSIONALSCANTOOL ModelNo.:AutoLinkAL2500 FCCID:WQ8-DR2015 ThisdevicecomplieswithPart15oftheFCCRules.Operation issubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation.

FCC ID: WQ8-DR2015 ANT

version01 Autel Intelligent Tech. Corp., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: AutoLink AL2500, AutoLink AL2500-R, AL1 FCC ID : WQ8-DR2015 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below: Model No. of antenna:N/A Type of antenna:PCB Antenna Gain of the antenna: 0 dBi Frequency range: 2402MHz~2480MHz for BT & BLE The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:Autel Intelligent Tech. Corp., Ltd. Address:7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen, China City:Shenzhen ZIP / Postal code: 518110 Country:Chin Place:Shenzhen, China Date: 5/20/2021 Signature:

RFEXPOSUREEVALUATION FCCID:WQ8-DR2015 AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 2402 -0.002 -0.002±1 0.99850.3903 BDR+EDR 2441 0.6070.607±11.60750.4523 2480 1.1461.146±12.14650.5163 2402 -0.007 -0.007±1 0.99350.3903 2441 0.5680.568±11.56850.4483 2480 1.1401.140±12.1450.5163 2402-0.191 -0.191±1 0.80950.3733 BLE24400.418 0.418±11.41850.4333 24800.981 0.981 ±11.98150.4973 TestResults:PASS.

Report No.: 18220WC10045902FCC ID: WQ8-DR2015Page 1 of 40 Code:AB-RF-05-a FCC TEST REPORT Client Name: Autel Intelligent Tech. Corp., Ltd. Address: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen, China Product Name: PROFESSIONAL SCAN TOOL Date: May 20, 2021 Shenzhen Anbotek Compliance Laboratory Limited Report No.: 18220WC10045902FCC ID: WQ8-DR2015Page 2 of 40 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 5 1.1. Client Information ....................................................................................................................................... 5 1.2. Description of Device (EUT) ..................................................................................................................... 5 1.3. Auxiliary Equipment Used During Test ................................................................................................... 6 1.4. Description of Test Modes ........................................................................................................................ 6 1.5. List of channels ........................................................................................................................................... 6 1.6. Description Of Test Setup ......................................................................................................................... 7 1.7. Test Equipment List .................................................................................................................................... 8 1.8. Measurement Uncertainty ......................................................................................................................... 9 1.9. Description of Test Facility ........................................................................................................................ 9 2. Summary of Test Results ................................................................................................................................... 10 3. Conducted Emission Test ................................................................................................................................... 11 3.1. Test Standard and Limit .......................................................................................................................... 11 3.2. Test Setup .................................................................................................................................................. 11 3.3. Test Procedure .......................................................................................................................................... 11 3.4. Test Data .................................................................................................................................................... 11 4. Radiation Spurious Emission and Band Edge ................................................................................................ 16 4.1. Test Standard and Limit .......................................................................................................................... 16 4.2. Test Setup .................................................................................................................................................. 16 4.3. Test Procedure .......................................................................................................................................... 17 4.4. Test Data .................................................................................................................................................... 18 5. Maximum Peak Output Power Test .................................................................................................................. 26 5.1. Test Standard and Limit .......................................................................................................................... 26 5.2. Test Setup .................................................................................................................................................. 26 5.3. Test Procedure .......................................................................................................................................... 26 5.4. Test Data .................................................................................................................................................... 26 6. 6DB Occupy Bandwidth Test ............................................................................................................................. 29 6.1. Test Standard and Limit .......................................................................................................................... 29 6.2. Test Setup .................................................................................................................................................. 29 6.3. Test Procedure .......................................................................................................................................... 29 6.4. Test Data .................................................................................................................................................... 29 7. Power Spectral Density Test .............................................................................................................................. 32 7.1. Test Standard and Limit .......................................................................................................................... 32 7.2. Test Setup .................................................................................................................................................. 32 7.3. Test Procedure ...................................................................................................................................…

Text truncated - open the document above for the full version.

FCCID:WQ8-DR2015 PhotoofPowerLineConductedEmissionTest PhotoofRadiationEmissionTest