WQ8-MPTIIPortable thermal printer,Mobile thermal printer

HF»�T 2inch Mobile Thermal Printer MPT-11 ＿ Xiamen Hanin Electronic Technology Co.,Ltd. ADD: Room 305A, Angye Building, P ioneering P ark, Torch High-tech Zone, Xiamen, China 36 1 009 TE L : +86 一 (0)59 2 -5885993 FAX: +86 一 (0)59 2 -588599 2 WEB: www.hprt.com 1.3 Storage Precautions 1 ) The printer should be placed in such an environment that the temperature 1s between- 4 0C and +60C, and the relative humidity is S93%RH{ 4 0 ° C). 2 ) If the printer will be stored for a long time, please be sure to take out the battery, otherwise may damage the battery and printer. 3) Normal thermal paper can't be kept too long, if you need to keep the receipt for a long period, please choose long term effective thermal paper. 4 ) The print paper should be keep away from high temperature environment and point-blank sunshine. 1.4 Battery Safety Precautions Be sure to carefully read the user manual before using the product. Ignore the following instructions may cause battery overheating, fire, explosion, damage and/or performance, and reduced product life. 1 ) Do not allow water, sea water from entering or leaking into the battery inside. If the batteries internal safety device burn, when charging it, it may produce any abnormal current and/or voltage, and cause any abnormal chemical reaction, then may cause the battery overheating, fire and/or explosion. 2 ) Do not use or place the battery nearby the stove or other high temperature places. Excessive heat maybe damage the resin shell and/or the insulation materials, thereby cause short-circuit inside the battery, then the battery may be caused overheating, burning and/or explosion. 3) When charging, use a specified charger. O ther conditions (high temperature, high pressure/high current, using the modified battery charger, etc.) excluded here may result in over-charging the battery and abnormal current and/or voltage , cause abnormal chemical reaction, and may cause the battery overheat, light and/or explosion. 4 ) Battery clearly marks with positive and negative. When connect the battery with the charger and/or printer, be sure to verify the correct battery orientation. Reverse insertion will cause the reverse charging and may cause abnormal chemical reaction, and then may cause the battery overheat, ignite, and/or explosion. 5) Do not make the battery contact with the power outlet and/or car cigarette lighter socket. This may cause high pressure and excessive current, and lead to the battery overheat, burning and/or explosion. 6) Do not heat the battery or put the battery into fire. This may melt insulation material and/or damage safety devices or safety equipment, then ignite electrolytic solution, and cause the battery overheat, burning and/or explosion. -2- CONTENTS 1 . P recau a ons ·············································································································l 1 . 1 S afety P recautions ··························································································l 1 . 2 O peration P recautions ····················································································l 1 .3 S torage P recautions ························································································ 2 1 . 4 Battery S afety P recautions ······ ...................... ................... .............. ...············· 2 2 . Brief Introduction ···································································································4 2 . 1 Appearance ····································································································4 2 . 2 Accessories · ····· ···· ····· ···· ····· ···· ····· ····· ···· ····· ···· ····· ···· · ···· ····· ···· ····· ···· · ···· ····· ···· ···4 2 . 1 . 1 S tandard Accessories ···········································································4 2 .1. 2 O ptional Accessories ············································································4 3. S pecifications ··········································································································S 4 . O peration M ethods ································································································ 6 4 . 1 P reparation Before Using ...··········································································· 6 4 . 1 . 1 Li-ion Battery Installation ·················· ·················· ·················· ··············· 6 4 . 1 . 2 P aper L oading ······················································································· 6 4 . 2 Basic F unction ··········································································· ·····················7 4 . 2 . 1 P rinter O n ·····························································································7 4 . 2 . 2 P rinter Off·····························································································7 4 . 2 .3 S elf-test ·································································································7 4 . 2 . 4 P aper F eeding ·······················································································7 4 . 2 .5 Bat t ery Charging ···················································································7 4 .3 Interface and P rinting ··················································································· 8 4 .3. 1 S erial Interfaces ······················································· ···························· 8 4 .3. 2 Infrared Ray (IR) & l rDA l nterface ················ ················ ················ ······· 8 4 .3.3 Bluetooth ····························································································· 8 4 . 4 LED Indicator and Bu zz er Definition ················· ················· ················· ········· 9 4 .5 S oftware Tools of M P T- 11············································································1 0 5. O ther Information ······················································…

Text truncated - open the document above for the full version.

FCCID:WQ8-MPTII

LabelLocationOnEUT Label ProductName:Portablethermalprinter,Mobilethermal printer ModelNo.:MPT-II FCCID:WQ8-MPTII ThisdevicecomplieswithPart15oftheFCCRules.Operation issubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation.

FCCID:WQ8-MPTII ANT

version01 AutelIntelligentTech.Corp.,Ltd. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:MPT-II,M23,ML238,MLU2381,MLU2382,MLU2383,MLU2384,MLU2385, MLX2381,MLX2382,MLX2383,MLX2384,MLX2385 FCCID:WQ8-MPTII fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsfor internal antennatype(s) describedbelow: ModelNo.ofantenna: N/A Typeofantenna:PCBAntenna Gainoftheantenna:2dBi Frequencyrange: 2402MHz~2480MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:AutelIntelligentTech.Corp.,Ltd. Address:7th-8th,10thFloor,Bldg.B1,Zhiyuan,XueyuanRd.Xili,Nanshan,Shenzhen, China City:Shenzhen ZIP/Postalcode:518110 Country:Chin Place:Shenzhen,China Date:5/19/2021 Signature:

RFEXPOSUREEVALUATION FCCID:WQ8-MPTII AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 2402 3.551 3.551±1 4.55150.8843 BDR+EDR 2441 3.8783.878±14.87850.9613 2480 2.3192.319±13.31950.6763 2402 4.878 4.878±1 5.87851.2003 2441 4.8644.864±15.86451.2063 2480 3.5873.587±14.58750.9063 24020.454 0.454±1 1.45450.4333 BLE24400.024 0.024±11.02450.3963 2480-1.357 -1.357±1-0.35750.2903 TestResults:PASS.

ReportNo.:18220WC10007201FCCID:WQ8-MPTIIPage1of61 Code:AB-RF-05-a FCCTESTREPORT ClientName:AutelIntelligentTech.Corp.,Ltd. Address: 7th-8th,10thFloor,Bldg.B1,Zhiyuan,XueyuanRd.,Xili, NanshanShenzhenChina ProductName:Portablethermalprinter,Mobilethermalprinter Date:May17,2021 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC10007201FCCID:WQ8-MPTIIPage2of61 Code:AB-RF-05-a Contents 1.GeneralInformation ............................................................................................................................................... 5 1.1.ClientInformation ....................................................................................................................................... 5 1.2.DescriptionofDevice(EUT) ..................................................................................................................... 5 1.3.AuxiliaryEquipmentUsedDuringTest ................................................................................................... 5 1.4.DescriptionofTestModes ........................................................................................................................ 6 1.5.Listofchannels ........................................................................................................................................... 7 1.6.DescriptionOfTestSetup ......................................................................................................................... 8 1.7.TestEquipmentList .................................................................................................................................... 9 1.8.MeasurementUncertainty ....................................................................................................................... 10 1.9.DescriptionofTestFacility ...................................................................................................................... 10 2.SummaryofTestResults ................................................................................................................................... 11 3.ConductedEmissionTest ................................................................................................................................... 12 3.1.TestStandardandLimit .......................................................................................................................... 12 3.2.TestSetup .................................................................................................................................................. 12 3.3.TestProcedure .......................................................................................................................................... 12 3.4.TestData .................................................................................................................................................... 12 4.RadiationSpuriousEmissionandBandEdge ................................................................................................ 17 4.1.TestStandardandLimit .......................................................................................................................... 17 4.2.TestSetup .................................................................................................................................................. 17 4.3.TestProcedure .......................................................................................................................................... 18 4.4.TestData .................................................................................................................................................... 19 5.MaximumPeakOutputPowerTest .................................................................................................................. 27 5.1.TestStandardandLimit .......................................................................................................................... 27 5.2.TestSetup .................................................................................................................................................. 27 5.3.TestProcedure .......................................................................................................................................... 27 5.4.TestData .................................................................................................................................................... 27 6.20DBOccupyBandwidthTest ........................................................................................................................... 31 6.1.TestStandard ............................................................................................................................................ 31 6.2.TestSetup .................................................................................................................................................. 31 6.3.TestProcedure .......................................................................................................................................... 31 6.4.TestData .................................................................................................................................................... 31 7.CarrierFrequencySeparationTest ................................................................................................................... 35 7.1.TestStandardandLimit .......................................................................................................................... 35 7.2.TestSetup .................................................................................................................................................. 35 7.3.TestProcedure .......................................................................................................................................... 35 7.4.TestData ........................................................................................................…

Text truncated - open the document above for the full version.

FCCID:WQ8-MPTII PhotoofPowerLineConductedEmissionTest PhotoofRadiationEmissionTest