WQ8301C315MX-Sensor

E mail: [email protected] m W e b : w w w . a utel.co m www.maxitpms.com SAFETY INSTRUCTIONS Before installing the sensor, read the installation and safety instructions carefully. For reasons of safety and for optimal operation, we recommend that any maintenance and repair work be carried out by trained experts only, in accordance with the guidelines of the vehicle manufacturer. The valves are safety-relevant parts which are intended for professional installation only. Failure to do so may result in the failure of the TPMS sensor. AUTEL does not assume any liability in case of faulty or incorrect installation of the product. CAUTION AUTEL guarantees that the sensor is free from material and manufacturing defects for a period of twenty-four (24) months or for 24,000 miles, whichever comes first. AUTEL will at its discretion replace any merchandise during the warranty period. The warranty shall be void if any of the following occurs: 1. Improper installation of products 2. Improper usage 3. Induction of defect by other products 4. Mishandling of products 5. Incorrect application 6. Damage due to collision or tire failure 7. Damage due to racing or competition 8. Exceeding specific limits of the product WARRANTY EXPLODED VIEW OF SENSOR Technical data of the sensor CAUTION: Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is externally damaged. Correct sensor nut torque: 4 Newton-meters Weight of sensor without valve18.5 g Dimensionsapprox. 55.1*29.4*21.8 mm Max. pressure range800 kPa Screw Sensor body Washer Screw-nut Cap Valve stem, rubber grommet and valve core assembly • The TPMS sensor assemblies are replacement or maintenance parts for vehicles with factory installed TPMS. • Make sure to program the sensors by AUTEL sensor program- ming tools by the specific vehicle make, model and year before installation. • Do not install programmed TPMS sensors in damaged wheels. • In order to guarantee optimal function, the sensors may only be installed with original valves and accessories provided by AUTEL. • Upon completing the installation, test the vehicle's TPMS following the procedures described in the original manufactur- er's user guide to confirm proper installation. PROGRAMMABLE UNIVERSAL TPMS SENSOR MX-SENSOR 433MHz/315MHz Metal Valve (Screw-in) Take 433MHz sensor as an example in this manual CAUTION: Do Not race with the vehicle on which the Clamp-in MX-Sensor is mounted, and always keep the drive speed under 240 km/h. INSTALLATION GUIDE Loosening the tire IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully and pay extra attention to the safety warnings and precautions. Use this unit correctly and with care. Failure to do so may cause damage and/or personal injury and will void the warranty. Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead. 1 CAUTION: The bead loosener must be facing the valve. Dismounting the sensor Remove the fastening screw and the sensor from the valve stem with a screwdriver, and then loosen the nut to remove the valve. 3 Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor and the valve stem together by screw. Hold the sensor body against the rim and tighten the screw. Mounting sensor and valve Step 1 Step 3Step 4 4 Step 2 Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 o .Mount the tire over the rim. Mounting the tire 5 CAUTION: The tire should be mounted to the wheel using tire changer manuf- acturer’s instructions. Dismounting the tire Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead. 2 CAUTION: This starting position must be observed during the whole dismounting process. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (2) Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

DATE : 2021-05-21 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Autel Intelligent Tech. Corp., Ltd. And 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Signature: Name: Frank Li Title: President Company: Autel Intelligent Tech. Corp., Ltd.

Autel Intelligent Tech. Corp., Ltd. DATE : 2021-05-21 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WQ8301C315 Product Name: MX-Sensor Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: Name: Frank Li Title: President Company: Autel Intelligent Tech. Corp., Ltd.

Test Model No.: MX‐Sensor 315MHz

Test Model No.: MX‐Sensor 315MHz

Global United Technology Services Co., Ltd. Report No.: GTS202105000155F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 22 TEST REPORT Applicant: Autel Intelligent Tech. Corp., Ltd. Address of Applicant: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Manufacturer: Autel Intelligent Tech. Corp., Ltd. Address of Manufacturer: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Factory: 1: AUTEL VIETNAM COMPANY LIMITED 2: Autel Intelligent Technology Corp., Ltd. Guangming Branch Address of Factory: 1: 4th Floor, Factory#6, Land#CN1, An Duong Industrial Zone, Hong Phong Township, An Duong County, Hai Phong, VietNam 2: 7F&6F, East Wing, Building 2, and 6F of Electronical Building, Yanxiang Industrial Zone, Gaoxin Rd, Dongzhou Community of Guangming New District, Shenzhen Equipment Under Test (EUT) Product Name: MX-Sensor Model No.: MX-Sensor 315MHz Trade Mark: AUTEL FCC ID: WQ8301C315 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231 Date of sample receipt: May 20, 2021 Date of Test: May 20-21, 2021 Date of report issued: May 21, 2021 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202105000155F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 22 2 Version Version No. Date Description 00 May 21, 2021 Original Prepared By: Date: May 21, 2021 Project Engineer Check By: Date: May 21, 2021 Reviewer Report No.: GTS202105000155F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 22 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION ...................................................................................................................................................2 3 CONTENTS ...............................................................................................................................................3 4 TEST SUMMARY ......................................................................................................................................4 5 GENERAL INFORMATION .......................................................................................................................5 5.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 5.2 TEST MODE .........................................................................................................................................6 5.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................6 5.4 DEVIATION FROM STANDARDS ..............................................................................................................6 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................6 5.6 TEST FACILITY ....................................................................................................................................6 5.7 TEST LOCATION ..................................................................................................................................6 5.8 ADDITIONAL INSTRUCTIONS ..................................................................................................................6 6 TEST INSTRUMENTS LIST ......................................................................................................................7 7 TEST RESULTS AND MEASUREMENT DATA .......................................................................................9 7.1 ANTENNA REQUIREMENT ......................................................................................................................9 7.2 RADIATED EMISSION METHOD ............................................................................................................10 7.2.1 Field Strength of The Fundamental Signal ..................................................................................12 7.2.2 Spurious emissions .....................................................................................................................14 7.3 20DB OCCUPY BANDWIDTH ...............................................................................................................20 7.4 DWELL TIME & SILENT TIME ..............................................................................................................21 8 TEST SETUP PHOTO .............................................................................................................................22 9 EUT CONSTRUCTIONAL DETAILS .......................................................................................................22 Report No.: GTS202105000155F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 22 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass F…

Text truncated - open the document above for the full version.

Test Model No.: MX‐Sensor 315MHz Radiated Emission