WQ8BATSTBV200MaxiVCI V200

Trademarks Autel ® , MaxiSys ® , MaxiDAS ® , MaxiScan ® , MaxiCheck ® , and MaxiRecorder ® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Autel. Disclaimer of Warranties and Limitation of Liabilities All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations. Autel will not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits). IMPORTANT Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the safety warnings and precautions. For Services and Support pro.autel.com www.autel.com 1-855-288-3587/1-855-AUTELUS (North America) 0086-755-86147779 (China) [email protected] For technical assistance in all other markets, please contact your local selling agent. Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device. There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work. Because of the vast number of test applications and variations in the products that can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover every circumstance. It is the automotive technician’s responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested. Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual. Safety Messages Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders. Safety Instructions The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety. DANGER When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life. SAFETY WARNINGS  Wear safety glasses and protective clothing.  NEVER smoke or allow a spark or flame in vicinity of battery or engine.  Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.  If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flush eye with cold running water for at least ten minutes and get medical attention immediately.  Use caution when working with metallic tools to prevent sparks or short circuits.  Remove any jewelry or watches before you start servicing the battery.  Keep hair, hands, and clothing as well as tester leads and cords away from moving blades and belts. MaxiBAS BT608 Touchcreen Battery & Electrical System Tester The feature-rich MaxiBAS BT608 battery and electrical system tester applies Adaptive Conductance, a proprietary Autel technology that identifies low- capacity batteries. It can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The BT608 also displays error codes, live data and system detection features to automatically scan the VIN and identify battery parameters and provide graphic instruction guides for battery positioning and testing. The easy to use Android based touchscreen tablet provides WiFi software updates as well as WiFi printing and sharing of the shop customized reports, or print on hand with the built-in thermal printer. There are two main components to the MaxiBAS BT608:  MaxiBAS Tester– the touchscreen battery & electrical system tester.  MaxiVCI V200 - Vehicle Communication Interface. MaxiBAS Tester 1. Multimeter Cable Port 2. Clamp Cable Port 3. Micro SD Slot 4. Thermal Printer 5. Paper Exit 6. Status Light 7. Ambient Light Sensor 8. Lock/Power Button 9. 5.5-inch Touchscreen 10. Camera 11. Camera Flash 12. Loudspeaker 13. USB Port Technical Specifications Item Description Operating System Android 9.0 Screen Display 5.5'' LCD touch screen with 720*1280 resolution…

Text truncated - open the document above for the full version.

< Autel Intelligent Tech. Corp., Ltd. > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: 2020-07-03 Subject; Request for Long Term Confidentiality FCC ID: WQ8BATSTBV200 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Frank Li Title: President

Autel Intelligent Tech. Corp., Ltd. Letter of Authorization Company: Autel Intelligent Tech. Corp., Ltd. Address: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Product Name: MaxiVCI V200 Model Number(s): MaxiVCI V200 Product Description: MaxiVCI V200 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-07-03 Name: Frank Li Title: President Company: Autel Intelligent Tech. Corp., Ltd.

Test model number: MaxiVCI V200

Test model number: MaxiVCI V200 RF Antenna

Global United Technology Services Co., Ltd. Report No.: GTS202007000021F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 24 + TEST REPORT Applicant: Autel Intelligent Tech. Corp., Ltd. Address of Applicant: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Manufacturer: Autel Intelligent Tech. Corp., Ltd. Address of Manufacturer: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Factory 1: AUTEL VIETNAM COMPANY LIMITED Address of Factory 1: 4th Floor, Factory#6, Land#CN1, An Duong Industrial Zone, Hong Phong Township, An Duong County, Hai Phong, Viet Nam Factory 2: Autel lntelligent Technology Corp.,Ltd Guangming Branch. Address of Factory 2: East Side of 6th-7th Floor,Building 2,Electronic Factory 6Floor,Yanxiang Science and Technology Industrial Park, Gaoxin Road,Dongzhou Community,Guangming Street, Guangming District,Shenzhen, China Equipment Under Test (EUT) Product Name: MaxiVCI V200 Model No.: MaxiVCI V200 Trade Mark: Autel FCC ID: WQ8BATSTBV200 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249 Date of sample receipt: Jun. 10, 2020 Date of Test: Jun. 10 - 23, 2020 Date of report issued: Jun. 28, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202007000021F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 24 2 Version Version No. Date Description 00 Jun. 28, 2020 Original Prepared By: Date: Jun. 28, 2020 Project Engineer Check By: Date: Jun. 28, 2020 Reviewer Report No.: GTS202007000021F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 24 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 8 5.7 TEST LOCATION ................................................................................................................................. 8 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 8 6 TEST INSTRUMENTS LIST ..................................................................................................................... 9 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 11 7.1 ANTENNA REQUIREMENT ................................................................................................................... 11 7.2 RADIATED EMISSION METHOD ........................................................................................................... 12 7.2.1 Field Strength of The Fundamental Signal ................................................................................ 14 7.2.2 Spurious emissions .................................................................................................................... 15 7.2.3 Bandedge emissions.................................................................................................................. 20 7.3 20DB OCCUPY BANDWIDTH .............................................................................................................. 22 8 TEST SETUP PHOTO ............................................................................................................................ 24 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 24 Report No.: GTS202007000021F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixia…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS202007000021F02 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 25 + TEST REPORT Applicant: Autel Intelligent Tech. Corp., Ltd. Address of Applicant: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Manufacturer: Autel Intelligent Tech. Corp., Ltd. Address of Manufacturer: 7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan, Shenzhen 518055, China Factory 1: AUTEL VIETNAM COMPANY LIMITED Address of Factory 1: 4th Floor, Factory#6, Land#CN1, An Duong Industrial Zone, Hong Phong Township, An Duong County, Hai Phong, Viet Nam Factory 2: Autel lntelligent Technology Corp.,Ltd Guangming Branch. Address of Factory 2: East Side of 6th-7th Floor,Building 2,Electronic Factory 6Floor,Yanxiang Science and Technology Industrial Park, Gaoxin Road,Dongzhou Community,Guangming Street, Guangming District,Shenzhen, China Equipment Under Test (EUT) Product Name: MaxiVCI V200 Model No.: MaxiVCI V200 Trade Mark: Autel FCC ID: WQ8BATSTBV200 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249 Date of sample receipt: Jun. 10, 2020 Date of Test: Jun. 10 - 23, 2020 Date of report issued: Jun. 28, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202007000021F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 25 2 Version Version No. Date Description 00 Jun. 28, 2020 Original Prepared By: Date: Jun. 28, 2020 Project Engineer Check By: Date: Jun. 28, 2020 Reviewer Report No.: GTS202007000021F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 25 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 8 5.7 TEST LOCATION ................................................................................................................................. 8 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 8 6 TEST INSTRUMENTS LIST ..................................................................................................................... 9 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 11 7.1 ANTENNA REQUIREMENT ................................................................................................................... 11 7.2 RADIATED EMISSION METHOD ........................................................................................................... 12 7.2.1 Field Strength of The Fundamental Signal ................................................................................ 14 7.2.2 Spurious emissions .................................................................................................................... 15 7.2.3 Bandedge emissions.................................................................................................................. 20 7.3 20DB OCCUPY BANDWIDTH .............................................................................................................. 22 8 TEST SETUP PHOTO ............................................................................................................................ 25 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 25 Report No.: GTS202007000021F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixia…

Text truncated - open the document above for the full version.

Test model number: MaxiVCI V200 Radiated Emission