WQJ-80190005Pulse Wi-Fi Dongle

Pulse WIFI Dongle . 8018XXXX-001 Rev. 50 13 July 2026 ID TECH 10721 Walker Street, Cypress, CA 90630-4720 Tel: (714) 761-6368 Fax (714) 761-8880 www.idtechproducts.com [email protected] VP7225 Pulse Dongle User Manual Page | 2 Copyright © 2025 ID TECH. All rights reserved. ID TECH 10721 Walker St. Cypress, CA 90630 This document, as well as the software and hardware described in it, is furnished under license and may be used or copied online in accordance with the terms of such license. The content of this document is furnished for information use only, is subject to change without notice, and should not be construed as a commitment by ID TECH. Reasonable effort has been made to ensure the accuracy of information provided herein. However, ID TECH assumes no responsibility or liability for any unintentional errors or inaccuracies that may appear in this document. Except as permitted by such license, no part of this publication may be reproduced or transmitted by electronic, mechanical, recording, or otherwise, or translated into any language form without the express written consent of ID TECH. ID TECH, Concierge, and ViVOpay are trademarks or registered trademarks of ID TECH. Warranty Disclaimer: The services and hardware are provided "as is" and "as-available" and the use of the services and hardware is at its own risk. ID TECH does not make, and hereby disclaims, any and all other express or implied warranties, including, but not limited to, warranties of merchantability, fitness for a particular purpose, title, and any warranties arising from a course of dealing, usage, or trade practice. ID TECH does not warrant that the services or hardware will be uninterrupted, error-free, or completely secure. FCC Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and the receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant applies only to Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. VP7225 Pulse Dongle User Manual Page | 3 ISED Warning statements This device complies with Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'aumoins 20 cm doit êtremaintenue entre l'antenne de cet appareil ettoutes les personnes. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. VP7225 Pulse Dongle User Manual Page | 4 CE Caution RF Exposure This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. EU DECLARATION OF CONFORMITY Hereby, ID TECH declares that the radio equipment type Pulse wifi dongle is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://idtechproducts.com/ The product is so constructed that it can be operated in at least one Member State without infringing applicable requirement…

Text truncated - open the document above for the full version.

ID TECH Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/7/6 FCC ID: WQJ-80190005 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing ID TECH certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing ID TECH certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Ref: Per KDB 986446 D01 v03 section B, 2a, ID TECH certifies that the equipment for this application does not contain Kaspersky cybersecurity or anti-virus software. Sincerely, ________________ Printed Name of Signee: Kenneth Chung Company: ID TECH Phone: 88633265998 Email: [email protected] Job title: Manager Docusign Envelope ID: BCF56174-18FB-84AD-83F1-C13E0665421C 7/7/2026

ID TECH 10721 Walker Street, Cypress, California 90630 Date:2026/7/6 FCC ID: [WQJ-80190005] FRN: 0018123943 US Agent – Attestation Statement / Part 2.911(d)(7) ID TECH certifies, that as of 2026/3/13, we have designated 10721 Walker Street, Cypress, California 90630, United States to accept service of process on our behalf for FCC ID: [WQJ- 80190005]. ID TECH, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. ID TECH, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of ID TECH for FCC ID: [WQJ-80190005]. Designated Agent Information: Company Name: ID TECH FRN: 0018123943 Address: 10721 Walker Street, Cypress, California 90630 Contact Person: Kenneth Chung Phone: 714-761-6368 Email: [email protected] Sincerely, Company: ID TECH Designated Agent: ID TECH Company Representative: Kenneth Chung Designated Agent Representative: Kenneth Chung Signature: 7/7/2026 Signature: 7/7/2026

ID TECH Date: 2026-07-06 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION FCC ID: WQJ-80190005 To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Signature Printed Name: Company: ID TECH Job Title: Manager Email: [email protected] Telephone: 88633265998 Docusign Envelope ID: BCF56174-18FB-84AD-83F1-C13E0665421C 7/7/2026

ID TECH POWER OF ATTORNEY DATE: 2026-07-06 To: Innovation, Science and Economic Development Canada 3701 Carling Ave., Bldg. 94, Ottawa, ON, K2H 8S2 We, the undersigned, hereby authorize Eurofins TA Technology (Shanghai) Co., Ltd. /Freda Shou on our behalf, to apply to FCC on our equipment for FCC ID: WQJ-80190005. Any and all acts carried out by Eurofins TA Technology (Shanghai) Co., Ltd. / Freda Shou on our behalf shall have the same effect as acts of our own. Sincerely, Signature ： Print name: Kenneth Chung Company: ID TECH Docusign Envelope ID: BCF56174-18FB-84AD-83F1-C13E0665421C 7/7/2026

ID TECH Request for Confidentiality Date: 2026-07-06 Subject: Confidentiality Request for: _____FCC ID: WQJ-80190005 ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Schematics Short Term Permanent Tune-Up Procedure Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ID TECH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _180__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Kenneth Chung (Signature/Title 2 ) (Print name) Docusign Envelope ID: BCF56174-18FB-84AD-83F1-C13E0665421C

EUT Appearance Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 1 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance EUT Appearance Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 2 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 3 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. a: EUT EUT Appearance Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 4 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Antenna 1 EUT Appearance Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 5 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 6 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Antenna 2 b: Antenna c: Adapter Picture 1: Constituents of EUT

Internal photo Report No.: EFTA26010165-IE-04 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-024A Page 1 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Internal photo Report No.: EFTA26010165-IE-04 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-024A Page 2 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Report No.: EFTA26010165-IE-04 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-024A Page 3 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Report No.: EFTA26010165-IE-04 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-024A Page 4 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Report No.: EFTA26010165-IE-04 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-024A Page 5 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Report No.: EFTA26010165-IE-04 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-024A Page 6 of 6 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd.

Prepared by: Liu Wei Approved by: Xu Kai Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 EMC TEST REPORT Applicant ID TECH FCC ID WQJ-80190005 Product Pulse Wi-Fi Dongle Brand ID TECH Model Pulse Wi-Fi Dongle Report No. EFTA26010165-IE-05-E1 Issue Date July 6, 2026 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC Code CFR47 Part15B (2025)/ ANSI C63.4-2014. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Test Report Report No.: EFTA26010165-IE-05-E1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 2 of 19 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ................................................................................................................................. 4 1.1 Notes of the Test Report ............................................................................................................ 4 1.2 Test Facility ................................................................................................................................ 4 1.3 Testing Location......................................................................................................................... 4 2 General Description of Equipment Under Test ................................................................................. 5 2.1 Applicant and Manufacturer Information ................................................................................... 5 2.2 General Information ................................................................................................................... 5 2.3 Applied Standards ..................................................................................................................... 6 2.4 Test Mode .................................................................................................................................. 7 3 Test Case Results ............................................................................................................................. 8 3.1 Radiated Emission ..................................................................................................................... 8 3.2 Conducted Emission ................................................................................................................ 13 4 Uncertainty Measurement ............................................................................................................... 16 5 Main Test Instruments ..................................................................................................................... 17 6 The EUT Appearance ...................................................................................................................... 18 7 Test Setup Photos ........................................................................................................................... 19 Test Report Report No.: EFTA26010165-IE-05-E1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 3 of 19 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Summary of measurement results Number Test Case Clause in FCC Rules Conclusion 1 Radiated Emission FCC Part15.109, ANSI C63.4-2014 PASS 2 Conducted Emission FCC Part15.107, ANSI C63.4-2014 PASS Date of Testing: February 4, 2026 ~ March 31, 2026 Date of Sample Received: January 28, 2026 Note: 1. The conformity assessment in this report is based on a direct comparison of the test results with the limits by Eurofins TA Technology (Shanghai) Co., Ltd., without considering measurement uncertainty. Test Report Report No.: EFTA26010165-IE-05-E1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 4 of 19 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test Facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. A2LA (Certificate Number: 3857.01) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3 Testing Location Company: Eurofins TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: https://www.eurofins.com/electrical-and-electronics E-mail: [email protected] Test Report Report No.: EFTA26010165-IE-05-E1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 5 of 19 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 2 General Description of Equipment Under Test 2.1 Applicant and Manufacturer Information Applicant ID TECH Applicant address 10721 Walker Street, Cypress, California 90630 Manufacturer ID TECH TAIWAN Co., Ltd Manufacturer address No. 16…

Text truncated - open the document above for the full version.

EMC Test Setup Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-031E Page 1 of 2 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Part 15B EMC Test Setup 30MHz-1GHz 1GHz-18GHz Picture 1: Radiated Emission Test Setup EMC Test Setup Report No.: EFTA26010165-IE-05 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-031E Page 2 of 2 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Picture 2: Conducted Emissions Test Setup