WRO-BM-HRM2BM-HRM2

Disclaimers User’s responsibility This Performance Monitor is intended for recreational use only. IT IS NOT INTENDED FOR MEDICAL PURPOSES. Warnings Exercise may include some risk. Before starting any exercise program, you should consult with a physician. It is recommended that you warm up and stretch before beginning your workout. Stop exercising immediately if you experience pain or feel faint, dizzy or short of breath. Please note that exercise intensity, medications, blood pressure, asthma, caffeine, alcohol, nicotine and other factors can affect your heart rate. Notice to persons with pacemakers, defibrillators or other implanted electronic devices. Before beginning use of this electronic sport equipment, it is recommended that you have an exercise test under your doctor’s supervision to ensure the safety and reliability of the simultaneous use of your implanted device and this equipment. Use of this product is at your own risk. Keep the Performance Monitor out of reach of young children. FCC and IC Statements This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. User Guide BM-HRM2 Performance Monitor Key Features  Heart beat detection with typ. accuracy of ±1 bpm for heart rate and 1 ms for beat-to-beat  Robust heart beat detection even in high motion environment due to sophisticated algorithm  Soft silicone electrodes provide excellent skin contact and are very comfortable and functional  Ergonomic and flat design, thickness of middle part only ~10mm  High sensitivity acceleration data with 2g, 4g, 8g or 16g full scale and 14 bits resolution  Acceleration data output data rates of 1.6Hz, 12.5Hz, 25Hz, 50Hz, 100Hz and 200Hz possible  Accurate step and posture detection available  Specific motion detection algorithms possible for customized versions  256 kB built-in memory for data recording - e.g. storing heart beat intervals for up to 3 days  Lifetime of standard CR2032 battery is more than 1 year when used 1 hour per day Quick Start The Performance Monitor transmits heart rate and motion related data that can be received, displayed and recorded by different devices to help you achieving your fitness and training goals, so it is important to wear it correctly. 1. For best results, we recommend you wear the Electrode Strap against bare skin. 2. Be sure to moisten the electrodes before exercising. 3. The electrodes should press firmly against your skin and the logo should be upright and located in the center of your sternum. 4. The Performance Monitor starts operation automatically when you put it on. Caution Should you ever experience any skin irritation or any other abnormality while wearing the Performance Monitor, remove it immediately. Care and Maintenance Your Performance Monitor (PM) helps you achieve your fitness and training goals. By following the directions below, you can maximize the life of your PM. If your PM does require servicing, you should send it to your nearest authorized service center. 1. Only perform the procedures described in this user guide. 2. Never attempt to disassemble or repair your PM. 3. Protect the PM from sharp objects, extreme heat or prolonged exposure to direct sunlight. 4. Store your PM in a clean, dry environment at room temperature. 5. When putting on or taking off the performance monitor, please do not twist, bend or stretch it excessively. 6. To clean the PM, wipe it with a soft, dry cloth, or with a cloth that has been moistened in a weak solution of water and a mild neutral detergent. Do not use thinner, benzene, alcohol or any other volatile agent to clean the PM. Water Resistance Your Performance Monitor is water resistant up to 30 m / 100 ft. Do not wear the PM while immersed in water. Replacing the Battery The PM contains a CR 2032 coin cell battery which should provide one year’s operation when using the PM one hour per day / 7 days per week. Replace the battery as illustrated here: Replacing the battery cover and the O ring together with the battery is recommended to ensure the PM remains water resistant. Replacement covers are available with replacement batteries. Keep batteries out of the reach of small children. Should a battery ever be swallowed accidentally, contact a physician immediately. FCC compliance statement This device complies with Part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on. changes or modifica�ons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separa�on between the equipment and receiver. -- Connect the equipment into an outlet on a circuit differ…

Text truncated - open the document above for the full version.

BMinnovationsGmbH Date:2022/5/12 TO:FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID 21046 Regarding:FCCID: WRO-BM-HR M2 To w homit may concern: We, the undersigned, hereby authorizeSGS-CSTCStandards TechnicalServicesCo., Ltd. (SGS)GuangzhouBranch and KobeJian in SGS-CSTCStandards TechnicalServicesCo., Ltd. (SGS)GuangzhouBranchto act on ourbehalfin all mannersrelatingto applicationfor equipmentauthorization withrespectto theFCC ID above,includingsigningof all documentsrelatingto these matters.Any and allacts carriedout by the agenton ourbehalfshall havethe same effectas acts of ourown. We, the undersigned, herebycertifythat we are not subjectto a denialof federalbenefits,that includesFCC benefits, pursuantto Section5301of the Anti-Drug AbuseAct of 1988, 21U.S.C.853(a). Whereour agentsignsthe applicationfor certificationon ourbehalf,I acknowledgethat all responsibilityfor complyingwith thetermsand conditionsfor Certification,as specifiedby SGS North America,Inc., still resideswith BMinnovationsGmbH . This authorizationis validuntil furtherwritten noticefromthe applicant. PrintName:RichardMayerhoferTitle:ManagingDirector Signature: OnbehalfofCompany:BMinnovationsGmbH Telephone:+498764949142 E-mail:[email protected]

BM innovations GmbH, Mainburger Str. 3, 85413 Hörgertshausen bm-innovations.com bm-innovations.com www. info@ FON: FAX: +49 8764 949142 +49 8764 949141 BM innovations GmbH Mainburger Str. 3 85413 Hörgertshausen Geschäftsführer Richard Mayerhofer München, HRB 170651 USt-ID DE257511778 Sparkasse Moosburg Kto.Nr.: BLZ: 431 184 743 517 40 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hoergertshausen, August 17 th , 2020 Regarding: Confidentiality Request regarding application for FCC ID: WRO-BM-HRM2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely Print Name: Richard Mayerhofer Title: Managing Director

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name BM innovations GmbH Address Mainburger Str. 3, 85413 Hoergertshausen Germany Grantee Code WRO FCC ID WRO-BM-HRM2 Authorized Contact Name Richard Mayerhofer Contact Email [email protected] Contact Phone +49 8764 949142 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: Dec 2, 2020 Print Name: Richard Mayerhofer Title: Managing Director *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 5 Appendix External Photos for GZCR2204000469AT EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 5 EUT Constructional Details (EUT Photos) EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 5 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 5 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 5

发件人：[email protected] 收件人：Liao, Christy (Shenzhen) 主题：[EXTERNAL] Response to Inquiry to FCC (Tracking Number 426007) 日期：2022 年 9 月 13 日 22:39:16 *** WARNING: this message is from an EXTERNAL SENDER. Please be cautious, particularly with links and attachments. *** Inquiry on 09/08/2022 : Inquiry: Dear Sir BM innovations GmbH (Grantee code: WRO) will apply FCC ID for WRO-BM-HRM2. This is a Performance Monitor. Due to the size, appearance, shape and shell material of the product: 1) The applicant silk printed the FCC ID number on the battery cover, and consumers need unscrew the battery cover to replace the battery (A 3.0V button battery powers ), instead of USB power supply; Replace the battery and close the backcover firmly is recommended to ensure the Performance Monitor remains water resistant. 2) Considering that there is not enough space on the back of the product to print the part 15.19a(3) statement, they hope to add this information in the manual to replace. Please refer the label and manual to check. Could you accept this FCC ID location and print the part 15.19a(3) statement in the manual to replace on the product body? Looking forward to receiving your reply, thanks. FCC response on 09/09/2022 Hello, We will accept your proposal to place the 15.19 statement in the manual. ---Reply from Customer on 09/12/2022--- Dear Sir Due to the size, appearance, shape and shell material of the product: The applicant silk prints the FCC ID certification number on the battery cover, and consumers can unscrew the battery cover to replace the battery (A 3.0V button battery powers), instead of USB power; It is recommended to replace the battery and close the back cover firmly to ensure that the performance monitor remains water resistant, because without the battery cover, the product casing would not be complete. Could you accept this FCC ID location? Looking forward to receiving your reply, thanks. FCC response on 09/13/2022 Hello, Yes, we can accept your proposal. Attachment Details: Label Label Do not reply to this message. Please select the Reply to an Inquiry Response link from the OET Inquiry System to add any additional information pertaining to this inquiry.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 4 Appendix Internal Photos for GZCR2204000469AT EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 4 EUT Constructional Details (EUT Photos) EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 4 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220400046903 Page: 1 of 12 FCC ID: WRO-BM-HRM2 Kobe Jian EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2204000469AT Applicant: BM innovations GmbH Address of Applicant: Mainburger Str. 3 Hoergertshausen, 85413 Germany Manufacturer: BM innovations GmbH Address of Manufacturer: Mainburger Str. 3 Hoergertshausen, 85413 Germany Factory: SHENZHEN FENDA SMART TECHNOLOGY LIMITED Address of Factory: FENDA Hi-TECH PARK, ZHOUSHI ROAD SHIYAN, BAOAN, SHENZHEN Equipment Under Test (EUT): EUT Name: BM-HRM2 Model No.: BM-HRM2-US Trade Mark: Firstbeat, Activio Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-08-09 Date of Evaluation: 2022-08-09 to 2022-08-17 Date of Issue: 2022-08-19 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046903 EMC-TRF-03 Rev 1.0 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2022-08-19 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046903 EMC-TRF-03 Rev 1.0 Page: 3 of 12 2 Evaluation Summary Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046903 EMC-TRF-03 Rev 1.0 Page: 4 of 12 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Evaluation Summary .......................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 5 4.1 General Description of E.U.T. ....................................................................................................... 5 4.2 Details of E.U.T. ........................................................................................................................... 5 4.3 Separation Distance ..................................................................................................................... 5 4.4 Evaluating Location ...................................................................................................................... 6 4.5 Facility ......................................................................................................................................... 6 4.6 Deviation from Standards ............................................................................................................. 6 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Technical Requirements Specification .............................................................................................. 8 5.1 Blanket 1 mW Blanket Exemption ................................................................................................. 8 5.2 MPE-based Exemption ................................................................................................................. 8 5.3 SAR-based Exemption ................................................................................................................. 9 6 Measurement and Calculation ..........................................................................................................11 6.1 Maximum transmit power ............................................................................................................11 6.2 RF Exposure Calculation .............................................................................................................11 7 EUT Constructional Details (EUT Photos) ........................................................................................12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046903 EMC-TRF-03 Rev 1.0 Page: 5 of 12 4 General Information 4.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 4.2 Details of E.U.T. Power supply: 3V DC(3V x 1 “CR2032” Button Cell) For BLE Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Integral Antenna Antenna Gain: 2dBi For 902-928MHz Operation Frequency: 915.35-918.75MHz Modulation Type: 2FSK Number of Channels: 35 Channel Spacing: 100KHz Antenna Type: Integral Antenna 4.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046903 EMC-TRF-03 Rev 1.0 Page: 6 of 12 4.4 Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. 4.5 Facility The facility is recognized, certified, or accredited by the following organizations: ●…

Text truncated - open the document above for the full version.

Bezeichnung : description : size7 x 2 A7,0 ± 0,2mm B2,0 ± 0,2mm C1,2 +0,1/-0,2mm D0,5 ± 0,3mm Feeding Point NC Eigenschaften / properties Wert / valueEinheit / unittol. Fre quenzbereich/ frequency range VSWR VSWR Im pedanz / impedance Antennengewinn / peak gain Antennengewinn / average gain Keramik / ceramic AWeVersion 104-10-11 NameÄnderung / modificationDatum / date Luftfeuchtigkeit / humidity: Umgebungstemperatur / temperature: Agilent E5071A Freigabe erteilt / general release: Kunde / customer Betriebstemp. / operating temperature: -40°C ~ +85°C G Eigenschaften / general specifications: 45 ~ 75% RH C Abbildung/ apperance: B Elektrische Eigenschaften / electrical properties: Lagerbedingung / storage conditions: 15°C ~ 35°C 2,0 (XZ-V) Basismaterial / base material: Kontakt Material / contact plating: D Prüfgeräte / test equipment: E Testbedingungen / test conditions: 50 http://www.we-online.de Datum / date ........................................................................... Unterschrift / signature Kontrolliert / approved Würth Elektronik eiSos GmbH & Co.KG D-74638 Waldenburg · Max-Eyth-Str. 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 .................................................. Würth Elektronik Ag + Ni + Sn F Werkstoffe & Zulassungen / material & approvals Geprüft / checked ............................................... .................................................................................. Leistung/ power capacity : 3 W max. Spezifikation für Freigabe / specification for release DATUM / DATE : 2004-10-11 max. Testbedingungen / test conditions 7488940245 A Mechanische Abmessungen / dimensions: Kunde / customer : Artikelnummer / part number : SMD Antenne WE-MCA Integral-Antenna WE-MCA Z Ω f 2400 ... 2500 MHz 2,0 (XZ-V) typ. A AdBi 0,5 typ. dBi B C A D RoHS compliant LF 1 2 50 ~ 70% 20°C ~ 25°C 1 2 SEITE 1 VON 4 Bezeichnung : description : Without Matching Circuit: Without Matching Circuit: K Messdiagramme/ measuring diagrams: Würth Elektronik eiSos GmbH & Co.KG D-74638 Waldenburg · Max-Eyth-Str. 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.de H Lötpadempfehlung / solder pads: SMD Antenne WE-MCA Integral-Antenna WE-MCA Spezifikation für Freigabe / specification for release Kunde / customer : DATUM / DATE : 2004-10-11 Artikelnummer / part number : 7488940245 11.522.533.54 20 15 10 5 0 Frequency (GHz) Return Loss S11 (dB) *Line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness. 1 1 2 3 1: 2.3125 GHz -9.942 dB 2: 2.44 GHz -17.656 dB 3: 2.62 GHz -9.959 dB S 11 (f) f = 1 GHz ... 4 GHz RoHS compliant LF 2.0 8.0 5.5 1.0 * 3 2 SEITE 2 VON 4 Bezeichnung : description : DATUM / DATE : 2004-10-11 L Richtdiagramme / radiation patterns: SMD Antenne WE-MCA Integral-Antenna WE-MCA Würth Elektronik eiSos GmbH & Co.KG D-74638 Waldenburg · Max-Eyth-Str. 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.de Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : 7488940245 LF RoHS compliant XY-cut scanning direction 0° 180° 90° y x z 270° XZ-cut scanning direction 0° 180° 90° z x y 270° XY cut @ 2.45 GHz Vertical Horizontal XZ cut @ 2.45 GHz Vertical Horizontal YZ-cut scanning direction 90° 0° 180° y z x 270° YZ cut @ 2.45 GHz Vertical Horizontal 1 23 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179180 181 182183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359360 1 23 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179180 181182 183184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR220400046902 Page: 1 of 59 FCC ID: WRO-BM-HRM2 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2204000469AT Applicant: BM innovations GmbH Address of Applicant: Mainburger Str. 3 Hoergertshausen, 85413 Germany Manufacturer: BM innovations GmbH Address of Manufacturer: Mainburger Str. 3 Hoergertshausen, 85413 Germany Factory: SHENZHEN FENDA SMART TECHNOLOGY LIMITED Address of Factory: FENDA Hi-TECH PARK, ZHOUSHI ROAD SHIYAN, BAOAN, SHENZHEN Equipment Under Test (EUT): EUT Name: BM-HRM2 Model No.: BM-HRM2-US Trade Mark: Firstbeat, Activio Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-08-09 Date of Test: 2022-08-09 to 2022-08-17 Date of Issue: 2022-08-19 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046902 Page: 2 of 59 Revision Record Version Report No. Date Remark 01 2022-08-19 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400046902 Page: 3 of 59 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Duty Cycle 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.6 KDB 558074 D01 v05r02 section 6 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1.3 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Below 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Above 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed…

Text truncated - open the document above for the full version.