WRYHC-5256VTwo Way Radio

Handheld Two Way Radio Model:HC-5256V Brand:Havoc FCC ID:WRYHC-5256V MIC Power on/off HC-5256V 136-174MHz SAFETYTRAINING INFORMATION Yo u r radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only”. In addition, your radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:  FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.  American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.  American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields– RF and Microwave. T he information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as‐sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Attention: This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages EKL Imports EKL Imports EKL Imports

EKL Imports P.O. Box 1997 Gig Harbor, Washington, United States Tel: 425-985-4493 Fax: 425-484-2400 Nov.18.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Land Mobile Radio frequency TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: WRYHC-5256V Dear Sir or Madam I attest that the product could program the frequence on computer through interface by manufacturer, is incapable of tuning, or readily being altered, by the end-user. And that the product has one antenna, one battery capacity and one body-worn and audio accessories. Please contact the undersigned if you have any questions or need any further information. Regards EKL Imports Signature: Name, Job Title and Dept.: Eric Lewis / Owner

Nov.18, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: WRYHC-5256V Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5.Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, EKL Imports Contact person: Eric Lewis Title: Owner

Nov.18, 2014 Federal Communication Commission Authorization and Evaluation Division Subject: FCC ID: WRYHC‐5256V Justification Letter for Expanded Frequency Range 136‐174MHz Gentlemen; You have asked EKL Imports for justification to have the freq range 136‐174MHz appears on the face of the FCC Grant of Certification for a FCC Part 90 Certification. This frequency range is regarded as usual & customary by United States Federal Government and its various departments, user organizations and the military to appear on the face of the equipment Grant of Certification. Sincerely, EKL Imports Eric Lewis / Owner

EKL Imports P.O. Box 1997 Gig Harbor, Washington, United States Date: Nov.18, 2014 Statement We, EKL Imports states that our device, FCC ID: WRYHC‐5256V , has no space to put the label except the battery compartment of this device. It is visible to the users as they purchase the products and install the battery. Regards Company: EKL Imports Contact Person: Eric Lewis Title: Owner

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location FCC RF Warning Label FCC ID: WRYHC-5256V

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT

FCC APPLI C Produc Brand Model Client Date of STAND REPOR A CAUTIO This rep laborato CATION PUR ct Designati Name Name f Issue DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Re : RPOSE : ion : : : : : : : tion of G ot be repro all not be q R Te port No.:A WRYHC‐ 5 Original E Handhel d Havoc HC‐5256 V EKL Imp o Nov. 12,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0157 5256V Equipment d Two Way R V ,HC‐A1 , HC orts LLC 014 1528:2003 2.1093 SI C95.1 Complia cept in full w of context. Rep 0141101 Radio C‐A1V ance(Sh without the port FH01 henzhen e written p t n) Co., L ermission Page 1 Ltd. of the test of 69 Report No.:AGC01570141101FH01 Page 2 of 69 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 12,2014 Valid Original Report App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Name nd Name del Name erence Desc T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address cription ndard ation te Tes EKL Im PO Bo Juston No.11 Chin a Handh Havoc HC-52 All the DC7.4 IEEE 47CF IEEE / Oct. 0 Attest 2F, Bu Street AGCR Teste Check e Authoriz st Rep mports LLC ox 1997 Gig n Electronic 5-119,Yuan a, 362000 held Two Wa c 256V ,HC-A e same, exc 4V by batter Std. 1528:2 R § 2.1093 /ANSI C95.1 07,2014 tation of Glo uilding 2, No t, Bao'an Dis RT-EC-PPT/ d By ed By zed By port C g Harbor WA Equipment tai 3 rd Road ay Radio A1 , HC-A1V ept for the m ry 003 1 obal Complia o.1-No.4, Ch strict, Shenz /SAR (2013- Bobby W Angela Solger Z Certific A 98335 USA Co., Ltd. , Jiangnan H model name ance (Shenz haxi Sanwei zhen, China -03-01) Wang a Li hang Report cation A Hi-tech Park . The test m zhen)Co., Ltd Technical In Nov. 12,201 Nov. 12,201 Nov. 12,201 t No.:AGC01 n k, Licheng D model is HC- d. ndustrial Pa 4 4 4 1570141101 Page 3 District, Quan 5256V. rk, Gushu, X FH01 of 69 nzhou Xixiang Report No.:AGC01570141101FH01 Page 4 of 69 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT Description .................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................... 7 2.3. Test Environment ................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8 3.1. Specific Absorption Rate (SAR) ............................................................................................................. 8 3.2. SAR Measurement Procedure ............................................................................................................... 9 3.3. DASY SAR System Description ........................................................................................................... 10 3.4. DASY5 E-Field Probe .......................................................................................................................... 12 3.5. Isotropic E-Field Probe Specification .................................................................................................... 12 3.6. Robot .................................................................................................................................................. 12 3.7. Light Beam Unit ................................................................................................................................... 13 3.8. Device Holder...................................................................................................................................... 13 3.9. Measurement Server ........................................................................................................................... 13 3.10. ELI4 Phantom ................................................................................................................................... 14 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 15 4.1. The composition of the tissue simulating liquid ..................................................................................... 15 4.2. Tissue Calibration Result ..................................................................................................................... 16 4.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................. 17 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 18 5.1. SAR System Validation Procedures ..................................................................................................... 18 5.2. SAR System Validation ........................................................................................................................ 19 6. EUT TEST POSITION ................................................................................................................................... 21 6.1. Body Worn Position ............................................................................................................................. 21 7. SAR EXPOSURE LIMITS ............................................................................................................................ 22 8. TEST EQUIPMENT LIST .......................................................................…

Text truncated - open the document above for the full version.

Page 1 of 56 FCC Part 90 Test Report Report No.: AGC01570141101FE09 FCC ID : WRYHC‐5256V PRODUCT DESIGNATION : Handheld Two Way Radio BRAND NAME : Havoc MODEL NAME : HC‐5256V, HC‐A1, HC‐A1V CLIENT : EKL Imports LLC DATE OF ISSUE : Nov.14, 2014 STANDARD(S) : FCC Part 90 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC01570141101FE09 Page 2 of 57 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov.14, 2014Valid Original Report Report No.: AGC01570141101FE09 Page 3 of 57 VERIFICATION OF COMPLIANCE Applicant: EKL Imports LLC PO Box 1997 Gig Harbor WA 98335 USA Manufacturer: Juston Electronic Equipment Co.,Ltd. No.115-119,Yuantai 3rd Road, Jiangnan Hi-tech Park, Licheng District, Quanzhou, China, 362000 Product Designation: Handheld Two Way Radio Brand Name: Havoc Test Model HC-5256V Series Model: HC-A1 , HC-A1V Difference description: All the same except for the model name. Date of Test: Nov.07, 2014 to Nov.13, 2014 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2009. The sample tested as described in this report is in compliance with the FCC Rules Part 90 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Freddie Duan Nov.14, 2014 Checked By Kidd Yang Nov.14, 2014 Authorized By Solger Zhang Nov.14, 2014 Report No.: AGC01570141101FE09 Page 4 of 57 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................. 6 1.1 PRODUCT DESCRIPTION ............................................................................................................. 6 1.2 RELATED SUBMITTAL(S) / GRANT (S) ......................................................................................... 7 1.3 TEST METHODOLOGY ................................................................................................................. 7 1.4 TEST FACILITY .............................................................................................................................. 7 1.5 SPECIAL ACCESSORIES .............................................................................................................. 7 1.6 EQUIPMENT MODIFICATIONS ..................................................................................................... 7 2. SYSTEM TEST CONFIGURATION ..................................................................................................... 8 2.1 EUT CONFIGURATION .................................................................................................................. 8 2.2 EUT EXERCISE ............................................................................................................................. 8 2.3 GENERAL TECHNICAL REQUIREMENTS .................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM .................................................................................... 9 2.5. SUMMARY OF TEST RESULTS ................................................................................................... 9 3. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION .................................................. 10 4. DESCRIPTION OF TEST MODES ..................................................................................................... 12 5. CONDUCTED LIMITS ........................................................................................................................ 13 5.1 PROVISIONS APPLICABLE ......................................................................................................... 13 5.2 MEASUREMENT PROCEDURE .................................................................................................. 13 5.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 14 5.4 TEST RESULT .............................................................................................................................. 15 6. FREQUENCY TOLERANCE .............................................................................................................. 17 6.1 PROVISIONS APPLICABLE ......................................................................................................... 17 6.2 MEASUREMENT PROCEDURE .................................................................................................. 17 6.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 18 6.4 TEST RESULT .............................................................................................................................. 19 7. EMISSION BANDWIDTH ................................................................................................................... 21 7.1 PROVISIONS APPLICABLE ......................................................................................................... 21 7.2 MEASUREMENT PROCEDURE .................................................................................................. 21 7.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 21 7.4 MEASUREMENT RESULT: ........................................................................................................... 22 8. UNWANTED RADIATION .................................................................................................................. 23 8.1 PROVISIONS APPLICABLE ........…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP