WTM-RFID-DUAL-IVGDual-Antenna-RFID-Module

veriCLASS VP3500 Reader Board P-Series Payment and Ticketing Embedded Reader Platform Hardware Specification PLT-02091, Rev. A.3 September 2014 hidglobal.com 35BveriCLASS VP3500 Reader Board Hardware Specification, PLT-02091, Rev. A.3 September 2014 Page 2 of 4 Copyright ©2011 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks & Disclaimers HID, HID Global, HID logo, iCLASS and veriCLASS are the trademarks or registered trademarks of HID Global Corporation in the U.S. and other countries. The information contained in this document is provided “AS IS” without any warranty. HID Global hereby disclaims all warranties and conditions with regard to the information contained herein, including all implied warranties of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall HID Global be liable, whether in contract, tort or otherwise for any indirect, special or consequential damages arising from the use of the information contained in this document. Revision History Date Author Description Version 8/21/14 RC Updated UL statement A.3 3/30/11 HP Corrected Storage Temperature in Table 1: Feature Overview & Table 13: Absolute Maximum Ratings A.2 3/7/11 HP Added FCC, IC and CE statements A.1 2/17/11 HP Initial version A.0 Contacts For additional offices around the world, see www.hidglobal.com corporate offices. North America Europe, Middle East and Africa 611 Center Ridge Drive Austin, TX 78753 USA Phone: 866-607-7339 Fax: 949 732 2120 Haverhill Business Park Phoenix Road Haverhill, Suffolk CB9 7AE England Phone: 44 (0) 1440 711 822 Fax: 44 (0) 1440 714 840 HID Global Customer Support: support.hidglobal.com 35BveriCLASS VP3500 Reader Board Hardware Specification, PLT-02091, Rev. A.3 Page 3 of 30 September 2014 Contents Regulatory ...................................................................................................................................................................... 5 FCC / Canada Radio Certification ....................................................................................................................... 5 CE Marking .................................................................................................................................................................... 6 Reference Documents ............................................................................................................... 7 1 Introduction ........................................................................................................................... 8 1.1 Product Description ........................................................................................................................................... 8 1.2 Key Features ......................................................................................................................................................... 8 1.3 veriCLASS Platform Products ...................................................................................................................... 9 1.4 Product Guide .................................................................................................................................................... 10 1.5 Scope/Purpose ................................................................................................................................................... 11 1.6 Terms and Abbreviations ............................................................................................................................... 11 2 Overview ............................................................................................................................... 12 2.1 Features ................................................................................................................................................................ 12 2.2 Assembly Drawing ........................................................................................................................................... 13 3 Power Considerations ........................................................................................................ 14 4 Host Interfaces ..................................................................................................................... 15 4.1 USB Interface P101 ............................................................................................................................................ 15 4.2 UART Interface P104 ....................................................................................................................................... 16 5 RF Interface .......................................................................................................................... 17 5.1 Operating Field Strength .............................................................................................................................. 17 5.2 Modulation Waveforms .................................................................................................................................. 18 5.2.1 ISO/IEC 14443 Type A Waveforms .................................................................................................................. 18 5.2.2 ISO/IEC 14443 Type B Waveforms................................................................................................................... 19 5.2.3 ISO/IEC 15693 Waveforms .................................................................................................................................. 20 5.2.4 FeliCa Waveforms .................................................................................................................................................... 21 6 Contact Interfaces ................................................................…

Text truncated - open the document above for the full version.

DESKO GmbH Gottlieb-Keim-Str. 56 D-95448 Bayreuth GERMANY Telefon: 0921/79279-0 Telefax: 0921/79279-14 Geschäftsführer: Dipl.-Ing. Bruno Geyer Dipl.-Ing. Werner Zahn E-Mail: [email protected] Internet: www.desko.de Register Gericht Bayreuth Nr.: HRB 1844 Umsatzsteuer Ident.-Nr.: DE 132 358 025 Steuer-Nr.: 181/29614 HypoVereinsbank Bayreuth Konto-Nr.: 1260203548 (BLZ: 780 204 29) SWIFT: HYPODEMM773 Commerzbank Bayreuth Konto-Nr.: 1306794 (BLZ: 773 400 76) SWIFT: COBADEFF773 IBAN: DE9877340076013067940 Sparkasse Bayreuth Konto-Nr.: 9004789 (BLZ: 773 501 10) SWIFT: BYLADEMM BIC:BYLADEM1SBT EMV Testhaus GmbH Gustav-Hertz-Str. 35 D 94315 Straubing To Whom It May Concern: Please be advised that we, DESKO GmbH, authorizes the following person from EMV Testhaus GmbH: • Mr. Christian Kiermeier to handle the application of Type Approval Services for the following coutries: USA (FCC ID) EMV Testhaus has our permission to use our technical documents for the approvals Contact person Harald Schmaus Position in the company R&D Date of signatory 18 August 2014 ___________________________ Dipl.-Ing. Harald Schmaus (R&D)

Ersteller: U. Rodemeier Revision: 04 Erstelldatum: 03.08.01 Datum: 11.05.07 Seite 1 von 1 Request for Confidentiality PHOENIX TESTLAB GmbH Date: 2014-08-04 Product Certification Königswinkel 10 D 32825 Blomberg RE: Certification Application FCC ID: WTM-RFID-DUAL-IVG Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rule, the applicant hereby requests confidential treatment of information accompanying this application as outlined below:  Block diagram  Schematics diagram  Functional description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. Thank you for your attention in this matter. Applicant’s Company address: EMV Testhaus GmbH Gustav Hertz Str. 35 94315 Straubing Signature: Job Title and Dept.: Christian Kiermeier

Supplement to User Guide Doc. No. 7 001 020 104 Page 1 of 1 Supplement to the User Guide veriCLASS VP3500 Reader Board P-Series Payment and Ticketing Embedded Reader Platform Hardware Specification PLT-02091, Rev.A.3 September 2014 This user guide is a draft version. It does not contain a note that the module “RFID-Dual-IVG “ has to be used in combination with the external antenna, described in the document “Ext. Antenna Specification” (Doc. No. 7 001 020 103). The final version of the user guide will contain this note. Bayreuth, 18. August 2014 / August 18, 2014 DESKO GmbH ......................................... Harald Schmaus Research & Development

DESKO GmbH Gottlieb-Keim-Str. 56 D-95448 Bayreuth GERMANY Telefon: 0921/79279-0 Telefax: 0921/79279-14 Geschäftsführer: Dipl.-Ing. Bruno Geyer Dipl.-Ing. Werner Zahn E-Mail: [email protected] Internet: www.desko.de Register Gericht Bayreuth Nr.: HRB 1844 Umsatzsteuer Ident.-Nr.: DE 132 358 025 Steuer-Nr.: 181/29614 HypoVereinsbank Bayreuth Konto-Nr.: 1260203548 (BLZ: 780 204 29) SWIFT: HYPODEMM773 Commerzbank Bayreuth Konto-Nr.: 1306794 (BLZ: 773 400 76) SWIFT: COBADEFF773 IBAN: DE9877340076013067940 Sparkasse Bayreuth Konto-Nr.: 9004789 (BLZ: 773 501 10) SWIFT: BYLADEMM BIC:BYLADEM1SBT Attn: Reviewing Engineer RE: PART 15 UNLICENSED MODULAR TRANSMITTER APPROVAL To Whom It May Concern: We, DESKO GmbH Gottlieb-Keim-Str. 56 95448 Bayreuth Germany, hereby requests for part 15 unlicensed modular transmitter approval of our device, described as follows: Brand name: DESKO Model name: RFID -Dual -IVG Type number: 47- 0459-01REV A FCC ID: WTM-RFID -DUAL-IVG In FCC Public Notice DA 00-1407 released June 26,2000 there are eight numbered requirements that our device complies with: 1. The modular transmitter must have its own shielding. Shielding is provided by a metal cover over the circuitry. 2. The modular transmitter must have buffered modulation/data inputs Modulation / data inputs are buffered by circuitry on the transmitter chip. 3. The modular transmitter must have its own power supply regulation Power supply regulation is provided by external circuitry over the range of 4.3 to 5.5 volts. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c The antenna is permanently attached. 5. The modular transmitter must be tested in a stand-alone configuration Testing was performed with the module extended outside of the host on a special extender board, as shown in the test setup photos. 6. The modular transmitter must be labelled with its own FCC ID number A photo of the labelled module is provided in the test setup documents, showing the FCC identifier of the module. DESKO GmbH Gottlieb-Keim-Str. 56 D-95448 Bayreuth GERMANY Telefon: 0921/79279-0 Telefax: 0921/79279-14 Geschäftsführer: Dipl.-Ing. Bruno Geyer Dipl.-Ing. Werner Zahn E-Mail: [email protected] Internet: www.desko.de Register Gericht Bayreuth Nr.: HRB 1844 Umsatzsteuer Ident.-Nr.: DE 132 358 025 Steuer-Nr.: 181/29614 HypoVereinsbank Bayreuth Konto-Nr.: 1260203548 (BLZ: 780 204 29) SWIFT: HYPODEMM773 Commerzbank Bayreuth Konto-Nr.: 1306794 (BLZ: 773 400 76) SWIFT: COBADEFF773 IBAN: DE9877340076013067940 Sparkasse Bayreuth Konto-Nr.: 9004789 (BLZ: 773 501 10) SWIFT: BYLADEMM BIC:BYLADEM1SBT 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The module complies fully with the operating requirements of Part 15 as demonstrated in the test report exhibit. 8. The modular transmitter must comply with any applicable RF exposure requirements. This module operates under Part 15, which is exempt from RF exposure evaluation owing to the very low operating power. Bayreuth, 18. August 2014 / August 18, 2014 DESKO GmbH ......................................... Harald Schmaus Research & Development

EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex B Page 1 of 3 1 Annex B – EUT pictures 1.1 List of Pictures Picture 1: EUT front side.................................................................................................... 2 Picture 2: EUT back side ................................................................................................... 2 Picture 3: EUT front side without shielding cover .............................................................. 3 Picture 4: frame antenna ................................................................................................... 3 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex B Page 2 of 3 Picture 1: EUT front side Picture 2: EUT back side EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex B Page 3 of 3 Picture 3: EUT front side without shielding cover Picture 4: frame antenna

Label and location information

EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex B Page 1 of 3 1 Annex B – EUT pictures 1.1 List of Pictures Picture 1: EUT front side.................................................................................................... 2 Picture 2: EUT back side ................................................................................................... 2 Picture 3: EUT front side without shielding cover .............................................................. 3 Picture 4: frame antenna ................................................................................................... 3 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex B Page 2 of 3 Picture 1: EUT front side Picture 2: EUT back side EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex B Page 3 of 3 Picture 3: EUT front side without shielding cover Picture 4: frame antenna

The test result refers exclusively to the tested model. This test report may not be copied or published in a part without the written authorization of the accreditation agency and/or EMV TESTHAUS GmbH Revision: 1.0 Customer: DESKO GmbH Gottlieb-Keim-Str. 56 95448 Bayreuth Germany Phone ++49 (0)921 79279 0 Fax ++49 (0)921 79279 14 RF test report 140372-AU01+W02  DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Page 2 of 32 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Tel.: +49 9421 56868-0 Fax: +49 9421 56868-100 Email: [email protected] Accreditation: Registration number: DGA-PL-224/95-03 CAB (EMC) registration number: BNetzA-CAB-02/21-02/3 FCC facility registration number: 221458 MRA US-EU, FCC designation number: DE0010 Test Laboratory: EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany The technical accuracy is guaranteed through the quality management of the EMV TESTHAUS GmbH EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Page 3 of 32 Table of contents 1 Test regulations ........................................................................................................................ 5 2 Equipment under Test (EUT) .................................................................................................... 6 3 AC power line conducted emissions ......................................................................................... 9 4 Radiated emission measurement (<1 GHz) ............................................................................ 17 5 Radiated emission measurement (>1 GHz) ............................................................................ 28 6 Equipment calibration status ................................................................................................... 29 7 Measurement uncertainty ....................................................................................................... 30 8 Summary ................................................................................................................................ 31 9 Revision History...................................................................................................................... 32 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Page 4 of 32 List of pictures Picture 1: Outline of conducted emission test setup ................................................................. 10 Picture 2: Graphic - Conducted emission on mains, phase 1 (continuous RFID reading) ......... 11 Picture 3: Table - Conducted emission on mains, phase 1 (continuous RFID reading) ............. 12 Picture 4: Graphic - Conducted emission on mains, neutral (continuous RFID reading) ........... 13 Picture 5: Table - Conducted emission on mains, neutral (continuous RFID reading) ............... 14 Picture 6: Graphic - Conducted emission on mains, phase 1 (antenna deactivated) ................. 15 Picture 7: Graphic - Conducted emission on mains, neutral (antenna deactivated) .................. 16 Picture 8: Test setup for radiated emission measurement (< 30 MHz) ...................................... 20 Picture 9: Test setup for radiated emission measurement (< 1 GHz) ........................................ 20 Picture 10: Radiated emission 9 kHz – 30 MHz @ 3m distance (13.56 MHz) ........................... 22 Picture 11: Radiated emission trace 30 MHz – 1000MHz @ 3m distance ................................ 23 Picture 12: Radiated emission table 30 MHz – 1000MHz @ 10m distance ............................... 23 Picture 13: Spectrum mask at 13.56 MHz @ 3m distance ........................................................ 25 List of tables Table 1: Equipment Calibration status ...................................................................................... 29 Table 2: Measurement uncertainty ........................................................................................... 30 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Page 5 of 32 1 Test regulations 47 CFR Part 2: 10-2013 Code of Federal Regulations Part 2 (Frequency allocation and radio treaty matters; General rules and regulations) of the Federal Communication Commission (FCC) 47 CFR Part 15: 10-2013 Code of Federal Regulations Part 15 (Radio Frequency Devices) of the Federal Communication Commission (FCC) ANSI C63.4: September 2009 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Summary of test results Standard Test result 47 CFR Part 15, sections 15.207 and 15.225 Passed EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Page 6 of 32 2 Equipment under Test (EUT) Product type: Dual-Antenna-RFID-Module Model Name: RFID-Dual-IVG Manufacturer: DESKO GmbH Serial number: Sample1 FCC ID: WTM-RFID-DUAL-IVG Application freq. band: N/A Frequency range: 13,56MHz Operating frequency: 13,56MHz Number of RF-channels: 1 Modulation: ASK Antenna types: PCB antenna ☐ detachable ☒ not detachable frame antenna (47-0464-01REV A) ☒ detachable ☐ not detachable Power supply: External power source nominal: 5.0 VDC Temperature range: -20°C to +50°C Remark: The tests were performed with 120V AC / 60Hz. EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Page 7 of 32 Photo documentation For photos of the EUT, see annex B. For photos taken during testing and the EUT-posit…

Text truncated - open the document above for the full version.

Ext. Antenna Specification Doc. No. 7 001 020 103 Page 1 of 1 External Antenna Specification for the DESKO RFID-Module The external antenna described below is a part of DESKO RFID-module “RFID-Dual-IVG”. Article name of external antenna: DESKO PENTA CUBE ID3 ANTENNA Type number: 47-0464-01REV A Number and name are printed on the antenna. Dimensions are in mm

EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex A Page 1 of 6 1 Annex A – Test setup 1.1 List of Pictures Picture 1: EUT position 1 ................................................................................................... 2 Picture 2: EUT position 2 ................................................................................................... 2 Picture 3: EUT position 3 ................................................................................................... 3 Picture 4: test setup radiated emission test 9 kHz - 30 MHz ............................................. 3 Picture 5: EUT test setup radiated emission test 30 MHz - 1 GHz .................................... 4 Picture 6: EUT test setup in open area test site ................................................................. 4 Picture 7: EUT test setup conducted emission test (front view) ......................................... 5 Picture 8: EUT test setup conducted emission test (rear view) .......................................... 5 Picture 9: EUT test setup extreme conditions test ............................................................. 6 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex A Page 2 of 6 Picture 1: EUT position 1 Picture 2: EUT position 2 EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex A Page 3 of 6 Picture 3: EUT position 3 Picture 4: test setup radiated emission test 9 kHz - 30 MHz EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex A Page 4 of 6 Picture 5: EUT test setup radiated emission test 30 MHz - 1 GHz Picture 6: EUT test setup in open area test site EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex A Page 5 of 6 Picture 7: EUT test setup conducted emission test (front view) Picture 8: EUT test setup conducted emission test (rear view) EMV TESTHAUS GmbH Gustav-Hertz-Straße 35 94315 Straubing Germany Revision: 1.0 DESKO GmbH Dual-Antenna-RFID-Module RFID-Dual-IVG 140372-AU01+W02 Annex A Page 6 of 6 Picture 9: EUT test setup extreme conditions test