X23-JAO-ARIE-1Panel PC

Arie Smart Terminal TM User Manual Revision 1.0 June 24, 2010 JAOtech Ltd Arie Smart Terminal TM Page | 1 Contents Introduction 0.1 Copyright 4 0.2 Disclaimer 4 0.3 Life Support Policy 4 0.4 Acknowledgements 5 0.5 FCC Interference Statement Class B 6 0.6 JAOtech Customer Services 6 0.7 Technical Support 6 0.8 Product Warranty 7 0.9 Safety Instructions 8 0.10 Packing List 10 Chapter 1 General Information 1.1 Introduction 11 1.2 Specifications 12 1.2.1 General 12 1.2.2 Handset Specifications 14 1.2.3 Optional Additional Features 14 1.3 Cleaning 15 1.4 Dimensions 16 Chapter 2 System Setup 2.1 A Quick Tour of the Arie 17 2.2 Installation Procedures 20 2.2.1 Connecting the Power Cord 20 2.2.2 Connecting the Keyboard and Mouse 20 2.2.3 Switching on the Power 20 2.3 Running the BIOS Setup Programme 21 2.4 Installing System Software 21 2.5 Installing the Drivers 21 Chapter 3 Graphic Chipset Setup 3.1 Introduction 22 3.1.1 Chipset 22 3.1.2 Display Memory 22 3.1.3 LVDS Transmitter 22 3.1.4 Display Types 22 3.2 Installation for Windows XP 22 3.3 Further Information 22 Chapter 4 Audio Interface 4.1 Introduction 23 4.2 Installation of Audio Driver 23 4.2.1 Installation for Windows 2000 XP 23 4.3 Further Information 23 Arie Smart Terminal TM Page | 2 Chapter 5 Touch Screen Interface 5.1 Introduction 24 5.1.1 General Information 24 5.1.2 General Specifications 24 5.1.3 Environmental Specifications 24 5.2 Installation of Touch Screen Drivers 25 5.2.1 Installation for Windows 25 5.3 Further Information 25 Arie Smart Terminal TM Page | 3 Appendix Appendix A Mother Board Layout A.1 Core Duo/Celeron with 945GME 26 A.2 Atom with Intel 945GME 27 A.3 Atom with Intel 945GSE 28 Appendix B Jumper and Connectors B.1 Jumpers Setting 29 B.2 Connectors 30 Appendix C Hardware Installation C.1 Overview of Hardware Installation and Upgrading 37 C.2 Disassembling the Panel PC 37 C.3 Installing the 2.5" Hard Disk Drive (HDD) 38 C.4 Installing the Central Processing Unit (CPU) 38 Appendix D VESA Mounting 39 Arie Smart Terminal TM Page | 4 Introduction Copyright This document is copyrighted, ©2007. All rights are reserved by JAOtech Ltd. JAOtech Ltd reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of JAOtech Ltd. Information provided in this manual is intended to be accurate and reliable. However, the JAOtech assumes no responsibility for its use, or for any infringements upon the rights of third parties that may result from such use. Disclaimer JAOtech Ltd. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. JAOtech Ltd assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. JAOtech Ltd. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. Life Support Policy JAOtech Ltd’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF JAOtech Ltd. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Arie Smart Terminal TM Page | 5 Acknowledgements  Award is a trademark of Award Software International, Inc.  IBM, PC/AT, PS/2 and VGA are trademarks of International Business  Machines Corporation.  Intel, Pentium, Core, Celeron and Atom are trademarks of Intel Corporation.  Microsoft Windows is a registered trademark of Microsoft Corp.  RTL is a trademark of Realtek Semiconductor Co., Ltd.  ESS is a trademark of ESS Technology, Inc.  UMC is a trademark of United Microelectronics Corporation.  SMI is a trademark of Silicon Motion, Inc.  Creative is a trademark of Creative Technology LTD.  All other product names or trademarks are properties of their respective owners.  This manual is for the Arie Smart Terminal TM . Arie Smart Terminal TM Page | 6 FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced…

Text truncated - open the document above for the full version.

CERTIFICATE Report No.: NEI-FCCE-1-R1001005 Issued Date: Apr. 08, 2010 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Panel PC Model Name ARIE Brand Name JAOTECH Applicant JAOtech Limited Address Perrywood Business Park Honeycrock Lane Redhill Surrey RH1 5DZ Measurement ANSI C 63.4 (2003) Method CISPR 22: 2005 +A1: 2005 ICES-003: 2004 The test data, data evaluation, and equipment configuration contained in our test report (Report No. NEI-FCCE-1-R1001005) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331

RV-0000000 Project No.: R1001005 Page 2 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 3 of 2 5 Neutron Engineering Inc. R1001005 RV-0000000 Project No.: R1001005 Page 4 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 24 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 25 of 2 5 Neutron Engineering Inc. R1001005

RV-0000000 Project No.: R1001005 Page 5 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 6 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 7 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 8 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 9 of 2 5 Neutron Engineering Inc. R1001005 RV-0000000 Project No.: R1001005 Page 10 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 11 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 12 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 13 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 14 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 15 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 16 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 17 of 2 5 Neutron Engineering Inc. RV-0000000 Project No.: R1001005 Page 18 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 19 of 2 5 Neutron Engineering Inc. R1001005 RV-0000000 Project No.: R1001005 Page 20 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 21 of 2 5 Neutron Engineering Inc. R1001005 RV-0000000 Project No.: R1001005 Page 22 of 2 5 Neutron Engineering Inc. R1001005 R1001005 RV-0000000 Project No.: R1001005 Page 23 of 2 5 Neutron Engineering Inc. R1001005

Report No.: NEI-FCCP-1-R1001005 Page 1 of 2 5 Neutron Engineering Inc. Radio Test Report FCC ID: X23-JAO-ARIE-1 This report concerns (check one) : Original Grant Class II Change Issued Date : Apr. 08, 2010 Project No. : R1001005 Equipment : Panel PC Model Name : ARIE Applicant : JAOtech Limited Perrywood Business Park Honeycrock Lane Redhill Surrey RH1 5DZ Tested by: Neutron Engineering Inc. EMC Laboratory Date of Test: Feb. 04, 2010 ~ Mar. 03, 2010 Testing Engineer : (Rush Kao) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 Report No.: NEI-FCCP-1-R1001005 Page 2 of 2 5 Neutron Engineering Inc. Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: NEI-FCCP-1-R1001005 Page 3 of 2 5 Neutron Engineering Inc. Table of Contents Page 1 . CERTIFICATION 4 2 . SUMMARY OF TEST RESULTS 5 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 8 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 3.4 DESCRIPTION OF SUPPORT UNITS 10 4 . EMC EMISSION TEST 11 4.1 CONDUCTED EMISSION MEASUREMENT 11 4.1.1 POWER LINE CONDUCTED EMISSION 11 4.1.2 MEASUREMENT INSTRUMENTS LIST 11 4.1.3 TEST PROCEDURE 12 4.1.4 DEVIATION FROM TEST STANDARD 12 4.1.5 TEST SETUP 12 4.1.6 EUT OPERATING CONDITIONS 12 4.1.7 TEST RESULTS 13 4.2 RADIATED EMISSION MEASUREMENT 15 4.2.1 RADIATED EMISSION LIMITS 15 4.2.2 MEASUREMENT INSTRUMENTS LIST 16 4.2.3 TEST PROCEDURE 16 4.2.4 DEVIATION FROM TEST STANDARD 16 4.2.5 TEST SETUP 17 4.2.6 EUT OPERATING CONDITIONS 17 4.2.7 TEST RESULTS- FCC PART 15.209 18 4.2.8 TEST RESULTS- FCC PART 15.225 20 4.3 FREQUENCY STABILITY MEASUREMENT 22 4.3.1 FREQUENCY STABILITY LIMITS 22 4.3.2 MEASUREMENT INSTRUMENTS LIST 22 4.3.3 TEST PROCEDURE 22 4.3.4 DEVIATION FROM TEST STANDARD 22 4.3.5 EUT OPERATING CONDITIONS 22 4.3.6 TEST RESULTS 23 5 . EUT TEST PHOTO 24 Report No.: NEI-FCCP-1-R1001005 Page 4 of 2 5 Neutron Engineering Inc. 1. CERTIFICATION E q u i p m e n t : Panel PC Brand Name : JAOTECH Model Name : ARIE A p p l i c a n t : JAOtech Limited Data of Test : Feb. 04, 2010 ~ Mar. 03, 2010 Standards : FCC Part15, Subpart C ANCI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-R1001005) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: NEI-FCCP-1-R1001005 Page 5 of 2 5 Neutron Engineering Inc. 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: (Antenna to EUT distance is 3 m) FCC Part15, Subpart C Standard Test Item Remark 15.207 Conducted Emission PASS 15.35 / 15.205 / 15.209 / 15.225 Radiated Emission PASS 15.225(e) Frequency Stability PASS 15.203 Antenna Requirement PASS NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. Report No.: NEI-FCCP-1-R1001005 Page 6 of 2 5 Neutron Engineering Inc. 2.1 TEST FACILITY The test facilities used to collect the test data in this report is C01 & CB08 (FCC R.N.: 614388) at the location of No.132-1, Lane 329, Sec. 2, Palain Road, Shijr City, Taipei, Taiwan. & 1F., No. 61, Ln. 77, Sing-ai Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95%。 A. Conducted Measurement : Test Site Method Measurement Frequency Range U，(dB) C01 ANSI 150 KHz ~ 30MHz 1.94 B. Radiated Measurement : Test Site Method Measurement Frequency Range Ant. H / V U，(dB) 30MHz ~ 200MHz V 2.48 30MHz ~ 200MHz H 2.16 200MHz ~ 1,000MHz V 2.50 OS-02 ANSI 200MHz ~ 1,000MHz H 2.66 30MHz ~ 200MHz V 3.22 30MHz ~ 200MHz H 3.35 200MHz ~ 1,000MHz V 3.24 200MHz ~ 1,000MHz H 3.11 1000MHz ~ 1800MHz V 4.05 1000MHz ~ 18000MHz H 3.97 18000MHz ~ 40000MHz V 4.04 CB08 ANSI 18000MHz ~ 40000MHz H 4.01 Report No.: NEI-FCCP-1-R1001005 Page 7 of 2 5 Neutron Engineering Inc. 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Equipment Panel PC Brand Name JAOTECH Model Name ARIE OEM Brand/Model Name N/A Model Dif…

Text truncated - open the document above for the full version.

Report No.: NEI-FCCP-1-R1001005 Page 24 of 2 5 Neutron Engineering Inc. 5. EUT TEST PHOTO Conducted Measurement Photos Report No.: NEI-FCCP-1-R1001005 Page 25 of 2 5 Neutron Engineering Inc. Radiated Measurement Photos