X5B-500246Wireless Controller for Nintendo Switch

126.9 mm 114.3 mm Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

COMPANY LETTERHEAD * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 7/10/2024 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: X5B-500246 FRN of applicant: 0019508654 Per section 2.911(d)(7) of the FCC rules, PERFORMANCE DESIGNED PRODUCTS, LLC.(“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: PERFORMANCE DESIGNED PRODUCTS, LLC. FCC Registration Number (FRN): 0019508654 Physical U.S. Company Address: 14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America Contact Person: Tom Roberts Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: Tom Roberts Title:Chief Technical Officer Company Name: PERFORMANCE DESIGNED PRODUCTS, LLC. Date: 7/10/2024 Agent Signed (if different from Applicant): Signed: Printed name: Click here to enter text. Title: Click here to enter text. Company Name: Click here to enter text. Date: Click here to enter a date.

COMPANY LETTERHEAD Covered Equipment Certification Attestation Letter 7/10/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: X5B-500246 PERFORMANCE DESIGNED PRODUCTS, LLC(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List , the applicant should include an explanation on why the equipment is not “covered” equipment. PERFORMANCE DESIGNED PRODUCTS, LLC(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Tom Roberts Title: Chief Technical Officer Company Name: PERFORMANCE DESIGNED PRODUCTS, LLC. Date: 7/10/2024

DATE:2024-07-10 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent Onourbehalf,IappointDONGGUAN SHUOXIN ELECTRONIC TECHNOLOGY CO., LTD. Zone A, 1F, No. 6, XinGang Road YuanGang Street, XinAn District, ChangAn Town, DongGuan City, GuangDong, China (Name of Agent company name andaddress)toactasouragentinthepreparationofthisapplicationforequipmentcertification.Icer tifythatsubmitteddocumentsproperlydescribethedeviceorsystemforwhichequipmentcertificat ionissought.Ialsocertifythateachunitmanufactured,importedormarketed,asdefinedintheFede ralCommunicationsCommission’sregulationswillhaveaffixedtoit a label identical to that submitted for approval with this application. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonourbehalf,Iack nowledgethatallresponsibilityforcomplyingwiththetermsandconditionsforcertification,stillres ideswith PERFORMANCE DESIGNED PRODUCTS, LLC14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America(Applicant Nameandaddress) <Signature>: Name:Tom Roberts Title: Chief Technical Officer Applicant Company: PERFORMANCE DESIGNED PRODUCTS, LLC.

DATE : 2024-07-10 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: X5B-500246 Product Name: Wireless Controller for Nintendo Switch Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature>: Name: Tom Roberts Title: Chief Technical Officer Applicant Company: PERFORMANCE DESIGNED PRODUCTS, LLC.

DATE : 2024.07.10 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: X5B-500246 Product Name: Wireless Controller for Nintendo Switch Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. <Signature> Name :Tom Roberts Title:Chief Technical Officer Company: PERFORMANCE DESIGNED PRODUCTS, LLC.

1 / 1 Label Location

RF EXPOSURE REPORT FCC ID: X5B-500246 Report Reference No. ................ : 24EFSB06007 04811 Date of issue .............................. : 2024-07-05 Applicant’s name ......................... : PERFORMANCE DESIGNED PRODUCTS, LLC Address ....................................... : 14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America Manufacturer ............................... : PERFORMANCE DESIGNED PRODUCTS, LLC Equipment ................................... : Wireless Controller for Nintendo Switch Trade Mark .................................. : / Model ........................................ : 500-246 Ratings ........................................ : I/P: DC 5V Charged, DC 3.7V Li-ion battery Testing Laboratory ...................... : DongGuan ShuoXin Electronic Technology Co., Ltd. Address ....................................... : Zone A, 1F, No. 6, XinGang Road YuanGang Street, XinAn District, ChangAn Town, DongGuan City, GuangDong, China According .................................... : KDB 447498 D04 Interim General RF Exposure Guidance v01 Test Engineer: Blue Qiu Responsible Engineer : Smile Wang Authorized Signatory: King Wang MPE CALCULATION METHOD: Antenna gain = 1.63dBi MAX Output Power：0.982dBm@2402MHz ERP=0.982+1.63-2.15= 0.46dBm WORSE CASE: 10^0.098=1.25mW <3mW Then SAR evaluation is not required END

Report No.: 24EFSB06007 04801 Page 1 of 63 FCC &ISED Radio Test Report FCC ID: X5B-500246 IC: 8814A-500246 The report concerns: Original Grant Report Reference No. ................. : 24EFSB06007 04801 Date Sample(s) Received ........... : 2024-06-12 Date of Tested ............................. : From 2024-06-12 to 2024-07-02 Date of issue ............................... : 2024-07-05 Testing Laboratory ...................... : DongGuanShuoXin Electronic Technology Co., Ltd. Address ...................................... : Zone A, 1F, No. 6, XinGang Road YuanGang Street, XinAn District, ChangAn Town, DongGuan City, GuangDong, China Applicant’s name ....................... : PERFORMANCE DESIGNED PRODUCTS, LLC Address for ................................. : 14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America Manufacturer............................... : PERFORMANCE DESIGNED PRODUCTS, LLC Equipment................................... : Wireless Controller for Nintendo Switch Trade Mark ................................. : / Model ........................................ : 500-246 Ratings ....................................... : I/P: DC 5V Charged, DC 3.7V Li-ion battery Test Engineer: Blue Qiu Responsible Engineer : Smile Wang Authorized Signatory: King Wang Report No.: 24EFSB06007 04801 Page 2 of 63 Table of Contents Page 1 TEST REPORT DECLARE 5 2 SUMMARY OF TEST RESULTS 6 2.1 MEASUREMENT UNCERTAINTY 7 3 GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 PARAMETERS OF TEST SOFTWARE 11 3.4 BLOCKDIAGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED 11 3.5 SUPPORT UNITS 11 3.6 TEST ENVIRONMENT CONDITIONS 12 4 AC POWER LINE CONDUCTED EMISSIONS TEST 13 4.1 LIMIT 13 4.2 TEST PROCEDURE 13 4.3 MEASUREMENT INSTRUMENTS LIST 13 4.4 TESTSETUP 14 4.5 EUT OPERATING CONDITIONS 14 4.6 TEST RESULTS 15 5 RADIATED EMISSION TEST 17 5.1 LIMIT 17 5.2 TEST PROCEDURE AND SETTING 18 5.3 MEASUREMENT INSTRUMENTS LIST 19 5.4 TESTSETUP 19 5.5 EUT OPERATING CONDITIONS 20 5.6 TEST RESULTS - 9 KHZ TO 30MHZ 21 5.7 TEST RESULTS- 30 MHZ TO 1000MHZ 22 5.8 TEST RESULTS - ABOVE 1000MHZ(BAND EDGE) 24 5.9 TEST RESULTS - ABOVE 1000MHZ(HARMONIC) 32 6 NUMBER OF HOPPING FREQUENCY 44 6.1 LIMIT 44 6.2 TEST PROCEDURE AND SETTING 44 6.3 MEASUREMENT INSTRUMENTS LIST 44 6.4 TEST SETUP 44 Report No.: 24EFSB06007 04801 Page 3 of 63 Table of Contents Page 6.5 EUT OPERATION CONDITIONS 44 6.6 TEST RESULTS 45 7 AVERAGE TIME OF OCCUPANCY 46 7.1 LIMIT 46 7.2 TEST PROCEDURE AND SETTING 46 7.3 MEASUREMENT INSTRUMENTS LIST 46 7.4 TEST SETUP 46 7.5 EUT OPERATION CONDITIONS 46 7.6 TEST RESULTS 47 8 HOPPING CHANNEL SEPARATION MEASUREMENT 49 8.1 LIMIT 49 8.2 TEST PROCEDURE AND SETTING 49 8.3 MEASUREMENT INSTRUMENTS LIST 49 8.4 TEST SETUP 49 8.5 EUT OPERATION CONDITIONS 49 8.6 TEST RESULTS 50 9 BANDWIDTH TEST 52 9.1 LIMIT 52 9.2 TEST PROCEDURE AND SETTING 52 9.3 MEASUREMENT INSTRUMENTS LIST 52 9.4 TEST SETUP 52 9.5 EUT OPERATION CONDITIONS 52 9.6 TEST RESULTS 53 10 MAXIMUM OUTPUT POWER 55 10.1 LIMIT 55 10.2 TEST PROCEDURE AND SETTING 55 10.3 MEASUREMENT INSTRUMENTS LIST 55 10.4 TEST SETUP 55 10.5 EUT OPERATION CONDITIONS 55 10.6 TEST RESULTS 56 11 CONDUCTED SPURIOUS EMISSION 59 11.1 LIMIT 59 11.2 TEST PROCEDURE AND SETTING 59 11.3 MEASUREMENT INSTRUMENTS LIST 59 Report No.: 24EFSB06007 04801 Page 4 of 63 Table of Contents Page 11.4 TEST SETUP 59 11.5 EUT OPERATION CONDITIONS 59 11.6 TEST RESULTS 60 12 FREQUENCY STABILITY MEASUREMENT 62 12.1 LIMIT 62 12.2 TEST PROCEDURE 62 12.3 MEASUREMENT INSTRUMENTS LIST 62 12.4 TEST SETUP 62 12.5 EUT OPERATION CONDITIONS 62 12.6 TEST RESULTS 63 Report No.: 24EFSB06007 04801 Page 5 of 63 1 TEST REPORT DECLARE Applicant for FCC PERFORMANCE DESIGNED PRODUCTS, LLC Address for FCC 14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America Manufacturer PERFORMANCE DESIGNED PRODUCTS, LLC Address 14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America Factory PERFORMANCE DESIGNED PRODUCTS, LLC Address 14144 Ventura Blvd, Suite 200 Sherman. Oaks CA 91423 United States Of America Equipment Wireless Controller for Nintendo Switch Model No. 500-246 Trade Mark / Standard FCC Part15, Subpart C (15.247) RSS-247 Issue 3, Aug. 2023 RSS-Gen Issue 5, Apr. 2018 ANSI C63.10-2013 We Declare: The equipment described above is tested by DongGuanShuoXin Electronic Technology Co., Ltd(ATT). and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and DongGuanShuoXin Electronic Technology Co., Ltd.(ATT) is assumed of full responsibility for the accuracy and completeness of these tests. ATT is not responsible for the sampling stage, so the results only apply to the sample as received. ATT's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. ATT shall have no liability for any declarations, inferences or generalizations drawn by the client or others from ATT issued reports. Report No.: 24EFSB06007 04801 Page 6 of 63 2 SUMMARY OF TEST RESULTS The EUT have been tested according to the applicable standards as referenced below: Standard(s) Section Test Item Judgment Remark FCC ISED 15.207 RSS-Gen8.8 AC Power Line Conducted Emissions PASS ------ 15.247(d) 15.205(a) 15.209(a) RSS-247 5.5 RSS-Gen 8.9 RSS-Gen 8.10 Radiated Emission PASS ------ 15.247(a)(1)(iii) RSS-247 5.1 (d) Number of Hopping Frequency PASS ------ 15.247(a)(1)(iii) RSS-247 5.1 (d) Average Time Of Occupancy PASS ------ 15.247(a)(1) RSS-247 5.1 (b) Hopping Channel Separation PASS ------ 15.247(a)(1) RSS-247 5.1 (a) RSS-Gen 6.7 Bandwidth PASS ------ 15.247(a)(1) RSS-247 5.1 (b) Maximum Output Power PASS ------ 15.247(d) RSS-247 5.5 Conducted Spurious Emission PASS ------ - RSS-Gen6.11 Frequency Stability PASS ------ 15.203 - Antenna…

Text truncated - open the document above for the full version.

Antenna Spec Te s t Site：BTL Inc. Frequency (MHz) Efficiency (%) Gain (dBi) 2400 12.64 -0.37 2410 13.40 0.02 2420 12.06 -0.37 2430 12.93 -0.09 2440 14.41 0.24 2450 14.66 0.32 2460 17.37 1.03 2470 17.98 1.24 2480 16.36 0.86 2490 19.33 1.63 2500 22.46 1.50 Total Response (dB) -25 0 -20 -15 -10 -5 X Y Z Azi muth = 0. 0 Elevation = 0.0 Roll = 0.0 Total Power (dBm) Angle (? Scale: 2/div Min: -18 Max: 2 0 180 30 210 60 240 90270 120 300 150 330 2400 MHz 2410 MHz 2420 MHz 2430 MHz 2440 MHz 2450 MHz 2460 MHz 2470 MHz 2480 MHz 2490 MHz 2500 MHz

1 / 2 Test Setup Conducted Measurement Photos Radiated Measurement Photos (Below 1GHz) 2 / 2 Radiated Measurement Photos (Above 1GHz) END