XBH-FFWFFW SERIES ISO RFID READER

Aleis ISO-FFW Series Operational Manual Aleis Pty Ltd ACN 130 754 826 www.aleis.com Ph: 07 46685942 Reader User Guide ISO-FFW Series Reader ISO-FFW-6000 Standard unit with Read and On LEDs Only ISO-FFW-8030 Display and 8030 Keypad ISO-FFW-8030-EXP With 9000 expansion board fitted ISO-FFW-8030- EXP-CLK With 9000 expansion board and Clock fitted ISO-FFW-9060 Display and 9060 Data Entry Keypad ISO-FFW-9060EXP With 9000 expansion board fitted ISO-FFW-9060- EXP-CLK With 9000 expansion board and Clock fitted Version 1.00 07/03/2011 IMPORTANT! This User Guide must be read in conjunction with Reader, prior to use. Copyright Aleis Pty Ltd 2011 A1064AUS Aleis ISO-FFW Series Operational Manual 2 of 45 TABLE OF CONTENTS Regularity Notices and Conformity .....................................................................................................................................................4 ISO-FFW Series Reader Instructions ..................................................................................................................................................5 1.0 The Aleis ISO-FFW Series System ........................................................................................................................................6 2.0 Preparation for Use ...................................................................................................................................................................7 3.0 Warnings ....................................................................................................................................................................................7 4.0 Care and Maintenance ..............................................................................................................................................................7 5.0 Methods of connection ..............................................................................................................................................................8 5.1 Direct connection with your scale indicator: ..........................................................................................................................8 5.2 Direct connection with your computer: ..................................................................................................................................8 5.3 Interface Protocol ...................................................................................................................................................................8 6.0 Optional Power ..........................................................................................................................................................................9 7.0 Using External Power Supply ..................................................................................................................................................9 8.0 The ISO-FFW8030 Keypad ....................................................................................................................................................9 9.0 ISO-FFW8030 Reader Method of Use .....................................................................................................................................9 9.1 How to: Read & Store RFIDs .............................................................................................................................................. 10 9.2 How to: Create Sessions using menu. .................................................................................................................................. 10 9.3 How to: Create Sessions using F1 and F2 Keys. .................................................................................................................. 10 9.4 How to: Upload RFIDs into the Reader ............................................................................................................................... 10 9.5 How to: Compare RFIDs in the Reader ............................................................................................................................... 11 9.6 Formatting the File System .................................................................................................................................................. 13 9.7 How to Format your reader .................................................................................................................................................. 13 10.0 ISO-FFW8030 Menu Tree ...................................................................................................................................................... 14 10.1 Session Menu ..................................................................................................................................................................... 14 10.2 Read Setup Menu ............................................................................................................................................................... 15 10.3 System Setup Menu ........................................................................................................................................................... 16 10.4 Reader Information Menu .................................................................................................................................................. 17 10.5 Memory Status Menu ......................................................................................................................................................... 17 11.0 ISO-FFW8030 Audio and Visual Alerts ................................................................................................................................ 18 12.0 ISO-FFW8030 Menu ............................................................................................................................................................... 19 12.1 Session .........................................…

Text truncated - open the document above for the full version.

Aleis Pty Ltd P.O. Box 63 Jandowae Qld 4410 Australia Telephone 07 4668 5941 Fax 07 4668 5946 Email [email protected] www.aleis.com Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for XBH-FFW To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Regards, John W Finlayson Managing Director Date: 07 March 2011

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission Attention: Certification Manager No. of pages: 1 From: Chieu Huynh Date: 18 th March 2011 EMC Ref: M110315_Cert_ISO-FFW Subject: FCC APPROVAL – FCC ID: XBH-FFW Please receive EMC Technologies’ Report M110315_Cert_ISO-FFW for review. The EUT is a tag reader. FCC Part 15.209 Submission - Documents submitted: Test Report: M110315_Cert_ISO-FFW APPENDIX A: MEASUREMENT INSTRUMENT DETAILS APPENDIX B: PHOTOGRAPHS APPENDIX C: OPERATIONAL DESCRIPTION APPENDIX D: BLOCK DIAGRAM APPENDIX E: SCHEMATICS APPENDIX F: FCC LABELLING DETAILS APPENDIX G: USER MANUALS APPENDIX H: GRAPHS OF EMI MEASUREMENTS Attachment 1: Model Comparisons FCC Forms: DoC Attestation Letter, Form 731, Form 731 Signatory & Agent Authorization Letter and Confidentiality Request. EMC Technologies Pty Ltd is acting as agent for Aleis Pty Ltd during this product approval. The FCC ID for this application is FCC ID: XBH-FFW Regards ______________ Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd

Aleis Pty Ltd P.O. Box 63 Jandowae Qld 4410 Australia Telephone 07 4668 5941 Fax 07 4668 5946 Email [email protected] www.aleis.com Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 AUTHORITY TO ACT AS AGENT & FORM 731 SIGNATORY I appoint EMC Technologies Pty Ltd to act as agent, on our behalf in this application for equipment authorization. I certify that the exhibits submitted properly describe the device or system for which equipment authorization is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Commission’s regulations, will have affixed to it a label identical to that submitted for approval with this application. In addition, I authorize Mr. Chris Zombolas, Technical Director of EMC Technologies Pty Ltd to sign the Form 731 and Mr. Chieu Huynh (Senior EMC Test Engineer) to be listed as the technical and non-technical contact for this application. Sincerely, John W Finlayson Managing Director Date: 07 March 2011

Aleis Pty Ltd P.O. Box 63 Jandowae Qld 4410 Australia Telephone 07 4668 5941 Fax 07 4668 5946 Email [email protected] www.aleis.com Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XBH-FFW. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Operational Description CONF Appendix C ISO-FFW OPDES.pdf Block Diagram CONF Appendix D ISO-FFW BLKDIA.pdf Schematics CONF Appendix E ISO-FFW SCHEM.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, John W Finlayson Managing Director Date: 07 March 2011

FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS ISO-FFW9060-EXP-CLK Reader

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW6000 Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW8030 Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW8030-EXP Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW8030-EXP-CLK Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW9060 Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW9060-EXP Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX F LABEL SAMPLE Example FCC & IC label This ID label will be attached to the outside of the device. Refer to the photos below. The ID label size will be 40mm x 28mm The Material type will be White Synthetic Label with a tyre synthetic, ultra permanent adhesive. Label Location Aleis Pty Ltd PO BOX 63 Jandowae 4410 QLD Australia www.aleis.com Model No: ISO-FFW9060-EXP-CLK Serial No: XXXX-XXXXX FCC ID: XBH-FFW IC: 8425A-FFW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N13429

FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS Antenna ISO-FFW9060EXP-CLK Reader FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B2 INTERNAL PHOTOS

FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX A MEASUREMENT INSTRUMENTS EQUIPMENT TYPE MANUFACTURER, MODEL NUMBER and SERIAL NUMBER CALIBRATION DUE DD/MM/YY EMI RECEIVER HP 8546A Sn: 3549A00290 11/08/11 EMCO 6502 LOOP ANTENNA 9 kHz – 30 MHz Sn: 2021 19/11/11 EMCO 93110B BICONICAL 20 - 300 MHz Sn: 9612-2901 17/01/12 ANTENNAS EMCO 93146A LOG PERIODIC 200 -1000MHz Sn: 9803 5033 17/01/12

FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX H GRAPHS RADIATED EMI Graph 1: 0.009 MHz – 30 MHz Graph 2: 30 MHz – 1000 MHz Vertical Polarisation Graph 3: 30 MHz – 1000 MHz Horizontal Polarisation EMC Technologies Pty. Ltd. - Global Product Certification Job No:m110315 Test Date: 07/03/2011 GRAPH No. 1 p:\PCF\m110315f_1.PCF EMC Technologies (Melbourne) 176 Harrick Rd, Keilor Park, 3042, Vic, Australia Phone+(613) 9365 1000 Fax+(613) 9331 7455 Aleis Pty Ltd RFID Reader Radiated Emissions (0.009MHz - 30MHz) Radiated Emissions (dBuV/m) M110315R # = Ambient Limits: Legend: Source: _ FCC15209-10 FCC PART 15.209 10mtr LMTS __ EUT on 46 , 45 , 47 , 49 , 51 Ver 5.5 Build 1603m setup for Room 12 ALSE t:A3101111E c1:SILVER+421 c2:C3760911 p:NONE a:NONESite ID: Room#12(iOATS),176 Harrick Rd, Keilor Park,Vic Test Officer:Chieu Huynh Peaks:No Freq Peak QP Val FCC15209-10 dL1 (MHz) (dBuV/m) (dBuV/m) (dB) 1 0.134 86.1 84.0 84.1 -.1 2 15.30 43.6 40.2 49.0 -8.8 3 0.268 60.2 57.4 78.1 -20.7 Frequency (MHz) .1 1 10 .009 30 10 20 30 40 50 60 70 80 90 100 110 v ^ 1 ~ v ^ 2 ~ v ^ 3 ~ EMC Technologies Pty. Ltd. - Global Product Certification Job No:m110315 Test Date: 07/03/2011 GRAPH No. 2 p:\PCF\m110315f_2.PCF EMC Technologies (Melbourne) 176 Harrick Rd, Keilor Park, 3042, Vic, Australia Phone+(613) 9365 1000 Fax+(613) 9331 7455 Aleis Pty Ltd RFID Reader Radiated Emissions - Vertical Polarity Radiated Emissions (dBuV/m) M110315R # = Ambient Limits: Legend: Source: _ FCC-B3 FCC CLASS B RAD 3M LIMITS __ Vertical Emissions 1 , 3 , 9 , 10 , 11 Ver 5.5 Build 1603m setup for Room 12 ALSE t:A1370112_10M c1:SILVER+421 c2:C3760911 p:NONE a:NONESite ID: Room#12(iOATS),176 Harrick Rd, Keilor Park,Vic Test Officer:Chieu Huynh Peaks:No Freq Peak QP Val FCC-B3 dL1 (MHz) (dBuV/m) (dBuV/m) (dB) 1 58.97 34.8 32.3 40.0 -7.7 2 768.01 37.3 37.0 46.0 -9.0 3 88.44 35.6 33.8 43.5 -9.7 4 81.00 34.4 26.5 40.0 -13.5 5 62.41 32.7 26.5 40.0 -13.5 6 66.08 31.9 25.2 40.0 -14.8 7 118.05 28.2 26.1 43.5 -17.4 Frequency (MHz) 100 30 1000 10 20 30 40 50 60 v ^ 1 ~ v ^ 2 ~ v ^ 3 ~ v ^ 4 ~ v ^ 5 ~ v ^ 6 ~ v ^ 7 ~ EMC Technologies Pty. Ltd. - Global Product Certification Job No:m110315 Test Date: 07/03/2011 GRAPH No. 3 p:\PCF\m110315f_3.PCF EMC Technologies (Melbourne) 176 Harrick Rd, Keilor Park, 3042, Vic, Australia Phone+(613) 9365 1000 Fax+(613) 9331 7455 Aleis Pty Ltd RFID Reader Radiated Emissions - Horizontal Polarity Radiated Emissions (dBuV/m) M110315R # = Ambient Limits: Legend: Source: _ FCC-B3 FCC CLASS B RAD 3M LIMITS __ Horizontal Emissions 4 , 5 , 6 , 7 , 8 Ver 5.5 Build 1603m setup for Room 12 ALSE t:A1370112_10M c1:SILVER+421 c2:C3760911 p:NONE a:NONESite ID: Room#12(iOATS),176 Harrick Rd, Keilor Park,Vic Test Officer:Chieu Huynh Peaks:No Freq Peak QP Val FCC-B3 dL1 (MHz) (dBuV/m) (dBuV/m) (dB) 1 768.00 37.4 36.8 46.0 -9.2 2 88.44 34.5 33.4 43.5 -10.1 Frequency (MHz) 100 30 1000 10 20 30 40 50 60 v ^ 1 ~ v ^ 2 ~

Aleis Pty Ltd P.O. Box 63 Jandowae Qld 4410 Australia Telephone 07 4668 5941 Fax 07 4668 5946 Email [email protected] www.aleis.com The ISO-FFW series is available in different configurations (See Below) Testing was performed on the most complex model ISO-FFW9060-EXP-CLK with the 9060 Keypad (qwerty),9000EXP and Clock board fitted. All results for this series are reported in this application (FCC ID:XBH-FFW). Description of the different configurations ISO-FFW6000 This unit is the most basic of the series. No Display or Keypad ISO-FFW8030 The ISO-FFW8030 unit has all off the main components of the ISO-FFW9060-EXP-CLK tested with no Expansion or Clock boards fitted and the basic 8030/50 keypad ISO-FFW8030EXP The ISO-FFW8030-EXP unit has all off the main components of the ISO-FFW9060-EXP- CLK tested with no Clock board fitted and the basic 8030/50 keypad. ISO-FFW8030 EXP-CLK The ISO-FFW8030-EXP-CLK unit has all off the main components of the ISO-FFW9060- EXP-CLK tested with Expansion, Clock and the basic 8030/50 keypad. ISO-FFW9060 The ISO-FFW9060 unit has all off the main components of the ISO-FFW9060-EXP-CLK tested with no Expansion or Clock boards and the 9060 keypad ISO-FFW9060EXP The ISO-FFW9060-EXP unit has all off the main components of the ISO-FFW9060-EXP- CLK tested with no Clock board fitted and the 9060 keypad. ISO-FFW9060 EXP-CLK The ISO-FFW9060-EXP-CLK unit is the most complex of the ISO-FFW series This unit was used for the testing. Regards, John W Finlayson Managing Director Date: 07 March 2011

Page 1 of 10 EMI TEST REPORT for CERTIFICATION to FCC PART 15.209 & RSS-210 / RSS-Gen FCC ID: XBH-FFW Industry Canada ID: 8425A-FFW Test Sample: ISO FFW Series RFID Readers Tested for: Aleis Pty Ltd Report Number: M110315_Cert_ISO_FFW Issue Date: 17 th March 2011 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall not be reproduced except in full. EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] FCC ID: XBH-FFW (IC ID: 8425A-FFW) Report No. M110315_Cert_ISO_FFW Page 2 of 10 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall not be reproduced except in full. EMI TEST REPORT FOR CERTIFICATION to FCC Part 15.209 & RSS-210 / RSS-Gen EMC Technologies Report No. M110315_Cert_ISO_FFW Issue Date: 17 th March 2011 CONTENTS 1.0 INTRODUCTION 2.0 GENERAL INFORMATION 3.0 CONDUCTED EMI MEASUREMENTS 4.0 RADIATED EMI MEASUREMENTS 5.0 ANTENNA REQUIREMENT 6.0 COMPLIANCE STATEMENT 7.0 UNCERTAINTIES 8.0 TEST REPORT APPENDICES APPENDIX A: MEASUREMENT INSTRUMENT DETAILS APPENDIX B: PHOTOGRAPHS APPENDIX C: OPERATIONAL DESCRIPTION APPENDIX D: BLOCK DIAGRAM APPENDIX E: SCHEMATIC APPENDIX F: FCC ID and IC ID LABELLING APPENDIX G: USER MANUAL APPENDIX H: GRAPHS of EMI MEASUREMENTS Attachment 1: Model Comparisons FCC ID: XBH-FFW (IC ID: 8425A-FFW) Report No. M110315_Cert_ISO_FFW Page 3 of 10 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall not be reproduced except in full. EMI TEST REPORT FOR CERTIFICATION to FCC PART 15.209 & RSS-210 / RSS-Gen Report No. M110315_Cert_ISO_FFW Test Sample: ISO FFW Series RFID Readers Manufacturer: Aleis Pty Ltd FCC ID: XBH-FFW IC ID: 8425A-FFW Equipment Type: Intentional Radiator Tested for: Aleis Pty Ltd Address: PO Box 63 Jandowae QLD 4410 Australia Contact: Brian Clayton Responsible Party: John Finlayson Test Standards: FCC Part 15 – Radio Frequency Devices (October 2009) FCC Part 15.209: Radiated Emission Limits, General Requirements. ANSI C63.4 – 2003 RSS-210 Issue 8 - Low Power Licence-Exempt RadioCommunication Devices (All Frequency Bands): Category I Equipment RSS-Gen Issue 3 - General Requirements and Information for the Certification of RadioCommunication Equipment Test Dates: 7 th and 8 th March 2011 Test Engineer: Chieu Huynh Attestation: I hereby certify that the device(s) described herein were tested as described in this report and that the data included is that which was obtained during such testing. Authorised Signatory: Chieu Huynh EMC Technologies Pty Ltd FCC ID: XBH-FFW (IC ID: 8425A-FFW) Report No. M110315_Cert_ISO_FFW Page 4 of 10 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall not be reproduced except in full. EMI TEST REPORT FOR CERTIFICATION to FCC PART 15.209 & RSS-210 / RSS-Gen 1.0 INTRODUCTION EMI testing was performed on the ISO FFW Series RFID Readers. The ISO FFW Series is available in different configurations (refer to below): ISO-FFW6000 This unit is the most basic of the series. No Display or Keypad ISO-FFW8030 The ISO-FFW8030 unit has all off the main components of the ISO- FFW9060-EXP-CLK tested with no Expansion or Clock boards fitted and the basic 8030/50 keypad ISO-FFW8030-EXP The ISO-FFW8030-EXP unit has all off the main components of the ISO-FFW9060-EXP-CLK tested with no Clock board fitted and the basic 8030/50 keypad ISO-FFW8030-EXP-CLK The ISO-FFW8030-EXP-CLK unit has all off the main components of the ISO-FFW9060-EXP-CLK tested with Expansion, Clock and the basic 8030/50 keypad ISO-FFW9060 The ISO-FFW9060 unit has all off the main components of the ISO- FFW9060-EXP-CLK tested with no Expansion or Clock boards and the 9060 keypad ISO-FFW9060-EXP The ISO-FFW9060-EXP unit has all off the main components of the ISO-FFW9060-EXP-CLK tested with no Clock board fitted and the 9060 keypad ISO-FFW9060-EXP-CLK The ISO-FFW9060-EXP-CLK unit is the most complex of the ISO- FFW Series. This unit was used for the testing. The intention of this application is to use one FCC ID: XBH-FFW (IC ID: 8425A-FFW) for all the models listed above. The configuration selected for testing was worst case to cover all the different possible parts/combina…

Text truncated - open the document above for the full version.

FCC ID: XBH-FFW IC ID: 8425A-FFW ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au A…

Text truncated - open the document above for the full version.