XD6V461CSmart Phone

ShenzhenTinnoMobileTechnologyCorp To:FederalCommunicationsCommissionDate:2024/07/04 7435OaklandMillsRoad Columbia,MD21046 USA Attestation Section2.911(d)(5)(i)andSection2.911(d)(5)(ii) (KDB986446D01CoveredEquipment) Section2.911(d)(5)(i) ShenzhenTinnoMobileTechnologyCorpcertifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Section2.911(d)(5)(ii) ShenzhenTinnoMobileTechnologyCorpcertifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamed entityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. TypeofEquipmentsubjecttoFCCCertification:SmartPhone FCCID:XD6V461C Ifyouhaveanyquestions,pleasefeelfreetocontactme ContactPerson:XiaopingLi PositionintheCompany:Manager DateofSignature:2024-07-04 Signatory (signatureoftheapplicant)

ShenzhenTinnoMobileTechnology Corp. 27-001,SouthsideofTianlongmobileHQBuilding,TongfaSouthRoad,XiliStreet,NanshanDistrict,Shenzhen,PRC U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO:American Certification Body, Inc. 313 ParkAvenue Suite300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: TINNO USA INC Contact Name: Brandy Kang Street Address: 2301W.PLANOParkway,SUITE102 City/Province/Zip: Plano, TX 75075 Telephone No: (626) 200-5096 Email: [email protected] FRN #: 0033457680 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of theApplicantnoted below. U.S. Agent Signature: Date: 2023-10-14 Signed by (Printed Name/Title): Brandy Kang / CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Tinno Mobile Technology Corp. Grantee Code: XD6 Contact Name: Xiaoping Li Street Address: 27-001, South side of Tianlong mobile HQ Building, Tongfa South Road, Xili Street, Nanshan District City/Province/Zip: Shenzhen /Guangdong/518000 Telephone No: (86) 755-86095550 Email: [email protected] FRN #: 0018783100 Applicant Signature 1 : Date:2023-10-14 Signed by (Printed Name/Title): Xiaoping Li / Manager 1 - Lettersshouldbeplacedonappropriateletterhead.

Federal Communications CommissionDA 23-914 Before the Federal Communications Commission Washington, D.C. 20554 In the Matter of Amendment of the Commission’s Rules Governing Standards for Hearing Aid-Compatible Handsets ) ) ) ) WT Docket No. 20-3 ORDER Adopted: September 29, 2023Released: September 29, 2023 By the Chief, Wireless Telecommunications Bureau: I.INTRODUCTION 1.Today we grant a limited waiver of section 20.19(b)(1) and (b)(3) of the Commission’s wireless hearing aid compatibility rules with respect to the volume control technical standard that handset manufacturers use in part to certify handsets as hearing aid-compatible under the 2019 ANSI Standard. 1 Our action is prompted by a request filed by the Alliance for Telecommunications Industry Solutions (ATIS) seeking waiver of certain aspects of these rules. 2 Under the terms of the time-limited waiver we grant today, a handset may be certified as hearing aid-compatible under the 2019 ANSI Standard if it meets the volume control testing requirements described in this Order as well as all other aspects of the 2019 ANSI Standard. 2.Consistent with ATIS’s September 12, 2023, ex parte letter (ATIS Ex Parte Letter) and as a condition of this waiver, we require a handset to pass the conversational gain test at the 2 Newton (N) force level on all available narrowband and wideband codecs and air interface combinations. 3 With respect to the 8N force level test, we agree with the ATIS Ex Parte Letter that this test should be performed, and we waive the requirement that a handset achieve at least an 18 dB conversational gain. 4 This waiver is conditioned on manufacturers performing the 8N force level test using the same testing parameters that we are requiring for the 2N force level test and to place on the handset’s package label the resulting conversational gain (even if it is below 18 dB) in a manner consistent with our existing hearing aid compatibility labeling rules. 3.With respect to the related receive distortion and noise performance (distortion/noise) and receive acoustic frequency response performance (frequency response) tests, we agree with the ATIS Ex Parte Letter that handsets must pass testing using at least one narrowband and one wideband codec of the 1 The 2019 ANSI Standard refers to the technical document entitled Accredited Standards Committee C63®– Electromagnetic Compatibility, American National Standard Methods of Measurement of Compatibility Between Wireless Communications Devices and Hearing Aids, ANSI C63.19-2019 (approved Aug. 19, 2019) (2019 ANSI Standard). 2 Petition of ATIS on Behalf of the Covered Entities of the Hearing Aid Compatibility Task Force for Limited, Interim Waiver, WT Docket Nos. 15-285 and 20-3 (filed Dec. 16, 2022) (ATIS Waiver Petition). ATIS filed its waiver petition on behalf of all manufacturers and service providers subject to section 20.19(b)(1) and (b)(3) of the Commission’s wireless hearing aid compatibility rules. Id. at 1, 4. 3 Letter from Thomas Goode, General Counsel, ATIS, to Marlene H. Dortch, Secretary, FCC, WT Docket Nos. 15- 285 and 20-3, at 2 (filed Sept. 12, 2023) (ATIS Ex Parte Letter); see also ATIS Waiver Petition at 4, 12-13. Below we explain the conversational gain test. See infra para. 9. 4 ATIS Ex Parte Letter at 2. Originally, ATIS had proposed to waive the entire 8N force level test. ATIS Waiver Petition at 10-11, 13. Federal Communications CommissionDA 23-914 2 manufacturer’s choosing. 5 We also accept ATIS’s suggestion that at least one narrowband and one wideband codec must pass testing for distortion/noise and frequency response and tests will be limited to one bit rate and only with those air interfaces associated with the chosen codecs and that the other codecs used for conversational gain at the 2N and 8N force levels are not required to undergo the distortion/noise and frequency response tests. 6 Further, as detailed below, we accept ATIS’s suggested method to set the volume control setting for testing these other codecs for conversational gain. 7 4.By taking these steps, we ensure that when the exclusive use transition period ends on December 5, 2023, new handset models can be certified as hearing aid-compatible using the 2019 ANSI Standard as modified by the conditions established in this Order. 8 Our actions allow consumers with hearing loss who use hearing aids or cochlear implants to benefit from wider availability of handsets offering improved hearing aid compatibility under the 2019 ANSI Standard’s radio frequency (RF) interference and inductive coupling requirements. In addition, our approach gives consumers assurance that a handset’s amplifier/speaker combination will provide improved volume control functionality over narrowband and wideband modes of voice communications, and that consumers have the information that they need to make informed purchasing decisions. Our actions today will move us closer to the Commission’s goal of reaching 100% hearing aid compatibility for wireless handsets, while also creating a path forward for testing to ensure that handsets have volume control capabilities. 9 5.This waiver is effective immediately upon release of this Order so that manufacturers may afford the benefits of this relief to consumers with hearing loss as soon as feasible. In reliance upon ATIS’s representations that efforts are underway to expeditiously develop a new volume control standard through the TIA standards setting process, we limit this waiver to a two-year period. 10 During this waiver period, we will evaluate the effectiveness of the waiver standard in meeting the needs of consumers with hearing loss and take action where appropriate. We expect that a two-year time limitation for the waiver will encourage all interested parties to work together to rapidly develop an improved volume control standard that we can incorporate into our rules in the future. To ensure this outcome, we condition this waiver in part on ATIS filing a status lett…

Text truncated - open the document above for the full version.

ShenzhenTinnoMobileTechnologyCorp Date:2024/07/04 AttestationforHACWaiverConditions FCCID:XD6V461C ToWhomitMayConcern, Weattestthatthishandsetapplicationwillcomplywiththerequirementsandconditionsof WaiverDA23-914forsection20.19(b)(l)and(b)(3)ofthewirelesshearingaidcompatibility ruleswithrespecttothevolumecontroltechnicalstandard. Weconsenttothefollowingconditionsofthewaiver: •PassConversationalGainat2Nonallavailablenarrowbandandwidebandcodecsand airinterfacecombinations. •Perform8Nconversationalgaintestandplaceconversationalgainforboth2Nand8N onthepackagelabelinamannerconsistentwithexistinghearingaidcompatibilitylabeling rules. •Passdistortionandreceiveacousticfrequencyresponsetestingusingatleastone narrowbandandonewidebandcodec,limitedtoonebitrate. PleaseseetheHACVolumeControltestreportforfurtherdetailsandsupportingdata. Shouldyouhaveanyquestionsorcommentsconcerningtheabove,pleasecontactthe undersigned. YoursSincerely, Signatory: Contactname:XiaopingLi Title:Manager Tel:(86)755-86095550 Email:[email protected] Companyname:ShenzhenTinnoMobileTechnologyCorp

ShenzhenTinnoMobileTechnologyCorp Date:2024/07/04 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: TheShenzhenTinnoMobileTechnologyCorp,theundersigned,herebyauthorizes Mrs.WendyZhanfromShenzhenMorlabCommunicationsTechnologyCo.,Ltd., toactonthebehalfoftheShenzhenTinnoMobileTechnologyCorpsolelyin mattersrelatingtotheapplicationforanFCCequipmentauthorizationforFCCID: XD6V461CincludingthesigningofdocumentsinconnectionwiththisApplication. NecessaryactscarriedoutShenzhenMorlabCommunicationsTechnologyCo., Ltd.onourbehalfoftheShenzhenTinnoMobileTechnologyCorpinconnection withtheApplicationshallhavethesameeffectasactsoftheShenzhenTinnoMobile TechnologyCorp.ShenzhenTinnoMobileTechnologyCorpalsoherebycertifythat nopartytothisapplicationissubjecttoadenialofbenefits,includingFCCbenefits, pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862. Thankyouforyourattentiontothismatter. YoursSincerely, Signatory: Contactname:XiaopingLi Title:Manager Tel:(86)755-86095550 Email:[email protected] Companyname:ShenzhenTinnoMobileTechnologyCorp

ShenzhenTinnoMobileTechnologyCorp Date:2024/07/04 To:FederalCommunicationsCommission,Authorization&EvaluationDivision,7435Oakland MillsRoad,Columbia,MD21046 Re:RequestofConfidentialityforFCCID:XD6V461C ToWhomitmayconcern: Pursuanttosections0.457and0.459ofCommission’sRules(CFR47),andSection552(b)(4)of theFreedomofInformationAct,ShenzhenTinnoMobileTechnologyCorpherebyrequests confidentialityandtreatmentofcertaininformationaccompanyingthisapplication.The materialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothe public.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShort-TermConfidentialityfor180daysfromgrantdateasoutlined inPublicNoticeDA04-1705.ThisprovisionwillgiveShenzhenTinnoMobileTechnologyCorp temporaryconfidentialityofcommerciallysensitiveinformationpriortoproductrelease. TherequestedPermanentandShort-TermConfidentialexhibitsarelistedasfollows: PERMANENTANDSHORT-TERMCONFIDENTIALLIST ItemExhibitDescription PERMANENT 1BlockDiagram 2OperationalDescription 3Schematics 4BOM 5Tuneup SHORT-TERM 6ExternalPhotos 7InternalPhotos 8Test-SetupPhotos 9UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. Signatory： Contactname:XiaopingLi Title:Manager Tel:(86)755-86095550 ShenzhenTinnoMobileTechnologyCorp Email:[email protected] Companyname:ShenzhenTinnoMobileTechnologyCorp

IMEI 2: 862746020130311 S/N: C61B2418000129 IMEI 1: 862746020100017 U10 MODEL NAME GSM WCDMA LTE FCC ID VOIX U10 850/900/1800/1900 B2/4/5 B2/4/5/12/17/25/26/41(HPUE)/66/71 XD6V461C Model name:VOIX U10 FCC ID :XD6V461C Label: Location:

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.16 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.891 S/m; ε r = 41.928; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.51, 9.51, 9.51) @ 750 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW750/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.39 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.13 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 4.41 W/kg SAR(1 g) = 2.25 W/kg; SAR(10 g) = 1.5 W/kg Maximum value of SAR (measured) = 2.22 W/kg 0 dB = 2.22 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.18 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.952 S/m; ε r = 41.277; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.12, 9.12, 9.12) @ 900 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW900/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 5.20 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 61.24 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 6.55 W/kg SAR(1 g) = 2.89 W/kg; SAR(10 g) = 1.87 W/kg Maximum value of SAR (measured) = 5.12 W/kg 0 dB = 5.12 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.5.19 System Check_1800MHz_Head Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; σ = 1.395 S/m; ε r = 40.165; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.93, 7.93, 7.93) @ 1800 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW1800/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 15.2 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 92.85 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 18.4 W/kg SAR(1 g) = 10.2 W/kg; SAR(10 g) = 5.42 W/kg Maximum value of SAR (measured) = 14.4 W/kg 0 dB = 14.4 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Date: 2024.05.29 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. System Check_1800MHz_Head Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; σ = 1.433 S/m; ε r = 40.965; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.93, 7.93, 7.93) @ 1800 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW1800/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 16.8 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 95.4 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 20.2 W/kg SAR(1 g) = 10.31 W/kg; SAR(10 g) = 5.45 W/kg Maximum value of SAR (measured) = 16.5 W/kg 0 dB = 16.5 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.31 System Check_2000MHz_Head Communication System: UID 0, CW (0); Frequency: 2000 MHz;Duty Cycle: 1…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.18 GSM850_GPRS(4 TX slots)_Left Cheek_Ch189 Communication System: UID 0, GSM850(class 12) (0); Frequency: 836.4 MHz;Duty Cycle: 1:2.08 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.922 S/m; ε r = 41.461; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.51, 9.51, 9.51) @ 836.4 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch189/Area Scan (71x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.427 W/kg Ch189/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.382 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.459 W/kg SAR(1 g) = 0.376 W/kg; SAR(10 g) = 0.292 W/kg Maximum value of SAR (measured) = 0.423 W/kg 0 dB = 0.423 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.19 GSM1900_GPRS(4 TX slots)_Right Cheek_Ch661 Communication System: UID 0, GPRS/EDGE12 (0); Frequency: 1880 MHz;Duty Cycle: 1:2.08 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; σ = 1.436 S/m; ε r = 40.069; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.66, 7.66, 7.66) @ 1880 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch661/Area Scan (71x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.136 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0.4520 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.157 W/kg SAR(1 g) = 0.103 W/kg; SAR(10 g) = 0.062 W/kg Maximum value of SAR (measured) = 0.133 W/kg 0 dB = 0.133 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.19 WCDMA Band II_RMC 12.2Kbps_Right Cheek_Ch9400 Communication System: UID 0, Generic WCDMA (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; σ = 1.436 S/m; ε r = 40.069; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.66, 7.66, 7.66) @ 1880 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch9400/Area Scan (71x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0778 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.0900 W/kg SAR(1 g) = 0.055 W/kg; SAR(10 g) = 0.033 W/kg Maximum value of SAR (measured) = 0.0693 W/kg 0 dB = 0.0693 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024.05.19 WCDMA Band IV_RMC 12.2Kbps_Right Cheek_Ch1413 Communication System: UID 0, Generic WCDMA (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1733 MHz; σ = 1.344 S/m; ε r = 40.364; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.93, 7.93, 7.93) @ 1732.6 MHz; Calibrated: 2023.09.14 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2023.09.19 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch1413/Area Scan (71x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.279 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.440 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.323 W/kg SAR(1 g) = 0.231 W/kg; SAR(10 g) = 0.156 W/kg Maximum value of SAR (measured) = 0.278 W/kg 0 dB = 0.278 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Test Laboratory: She…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacturer's document. 128189251128189251 824.2836.4848.8824.2836.4848.8 32.7432.8832.8233.5023.7423.8823.8224.50 32.6332.7932.7133.5023.6323.7923.7124.50 32.1132.1432.0232.5026.1126.1426.0226.500.12 30.4730.5430.5131.0026.2126.2826.2526.740.07 29.3129.3629.2730.0026.3126.3626.2727.000.09 27.6127.6427.5728.0018.6118.6418.5719.000.07 26.4426.5226.4827.0020.4420.5220.4821.000.08 24.6124.6324.5725.0020.3520.3720.3120.740.06 23.2623.4423.3924.0020.2620.4420.3921.000.18 Max.32.88Max.26.36 512661810512661810 1850.218801909.81850.218801909.8 30.0230.1130.0430.5021.0221.1121.0421.50 29.9430.0930.0230.5020.9421.0921.0221.50 29.4429.5329.4729.8023.4423.5323.4723.800.09 27.8227.8627.7428.0023.5623.6023.4823.740.12 26.7626.7726.7227.0023.7623.7723.7224.000.05 26.7826.7926.7627.0017.7817.7917.7618.000.03 25.1925.2125.1626.0019.1919.2119.1620.000.05 23.5323.6523.4624.5019.2719.3919.2020.240.19 22.2822.3222.2323.5019.2819.3219.2320.500.09 Max.30.11Max.23.77 926294009538131214131513413241824233 966298009938153716381738435744074458 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps23.4423.4923.4224.0023.4123.4523.3824.0023.4623.5223.4924.00 3GPP Rel 5HSDPA Subtest-122.3022.2922.2423.0022.1922.2222.3323.0022.1022.0522.0623.00 3GPP Rel 5HSDPA Subtest-222.3222.2622.3023.0022.1622.2022.2223.0022.0922.0222.0523.00 3GPP Rel 5HSDPA Subtest-321.8421.8021.7622.5021.7521.7021.7422.5021.5821.5421.5722.50 3GPP Rel 5HSDPA Subtest-421.8321.7621.7522.5021.6721.6921.7222.5021.5421.5221.5422.50 3GPP Rel 6HSUPA Subtest-121.8521.7821.7522.5021.7221.7321.7522.5021.5721.5821.6022.50 3GPP Rel 6HSUPA Subtest-222.3222.3022.2523.0022.2322.4822.3123.0022.0322.0722.1123.00 3GPP Rel 6HSUPA Subtest-321.3421.3121.3122.5021.2621.2421.3122.5021.0821.1021.0922.00 3GPP Rel 6HSUPA Subtest-422.3622.3022.2823.0022.1822.2622.2923.0022.1222.0722.1023.00 3GPP Rel 6HSUPA Subtest-521.3221.2521.2922.0021.2121.2321.2722.5020.1620.1420.2321.00 3GPP Rel 7 HSPA+ (16QAM) Subtest-119.9419.8919.9120.5019.7919.8419.8120.5019.6819.6519.6720.50 Cable Loss0.8Cable Loss0.8Cable Loss0.5 Max.23.49Max.23.45Max.23.52 Full Power GSM850Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot GPRS 2 Tx slots Tune-up Limit (dBm) Tune-up Limit (dBm) Ch Delta > 0.5 0.25 GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots Mode AttenuatorCable Loss : 0.5 GSM1900Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot Tune-up Limit (dBm) Ch Delta > 0.5 0.17 GPRS 2 Tx slots GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots TX Channel Rx Channel Frequency (MHz) Mode AttenuatorCable Loss : 0.8 Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) BandWCDMA Band II (dBm)WCDMA Band IV (dBm)WCDMA Band V (dBm) Attenuator Mode Tune-up Limit (dBm) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24020075S01 BW [MHz]ModulationRB SizeRB Offset Low Channel Middle Channel High Channel BW [MHz] ModulationRB SizeRB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1022.7122.8522.6820QPSK1022.7022.7522.71 20QPSK14922.8823.0322.9520QPSK14922.9323.0122.86 20QPSK19922.5922.5822.6020QPSK19922.5222.5622.51 20QPSK50022.0822.1722.1320QPSK50021.9221.9821.89 20QPSK502422.0022.0221.9720QPSK502421.7921.8621.85 20QPSK505021.9321.9721.9220QPSK505021.7621.8421.74 20QPSK100021.8521.9421.8420QPSK100021.8021.8121.78 2016QAM1021.9722.0421.952016QAM1021.8221.8821.85 2016QAM14922.2322.2422.192016QAM14922.1222.1922.11 2016QAM19922.0222.0321.952016QAM19921.8321.8921.87 2016QAM50020.9220.9420.932016QAM50020.7420.8020.77 2016QAM502420.8520.9120.842016QAM502420.7720.8720.78 2016QAM505020.9120.9220.822016QAM505020.8520.8620.76 2016QAM100020.8420.9320.912016QAM100020.7420.8220.73 2064QAM1020.9220.9920.952064QAM1020.7820.8620.76 2064QAM14921.0821.1521.122064QAM14921.0921.1021.03 2064QAM19920.6920.7820.722064QAM19920.7320.7720.75 2064QAM50019.9519.9919.982064QAM50019.8219.8619.78 2064QAM502419.9920.0219.942064QAM502419.8519.8919.83 2064QAM505019.8719.9619.942064QAM505019.8719.8819.82 2064QAM100019.9020.0019.922064QAM100019.7619.8619.79 18675 1890019125200252017520325 1857.518801902.51717.51732.51747.5 15QPSK1022.6222.7622.5915QPSK1022.6322.6822.64 15QPSK13722.7922.9422.8615QPSK13722.8622.9422.79 15QPSK17422.5022.4922.5115QPSK17422.4522.4922.44 15QPSK36021.9922.0822.0415QPSK36021.8521.9121.82 15QPSK362021.9121.9321.8815QPSK362021.7221.7921.78 15QPSK363921.8421.8821.8315QPSK363921.6921.7721.67 15QPSK75021.7621.8521.7515QPSK75021.7321.7421.71 1516QAM1021.8821.952…

Text truncated - open the document above for the full version.