XJH20110872515HELICOPTER SERIES

Model No. 3319 3319A 3319B 3320 3310 3311 3312 3313 3315 3317 3363 3365 3369 3395 3396 3397 3398 3399 3387 3389 3376A 3376 3309 3318 3378A UJ301 statement： changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY NANQIAO OUTSIDE,LINTING INDUSTRIAL PARK, CHENGHUA SHANTOU,GUANGDONG,515800 CHINA Authority to Act as Agent Date: 10-08-2011 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) , to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 10-08-2011 By: Cai Yong XI (Signature 1 ) (Print name) Title: Manger On behalf of: GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY Telephone: 86-75488854756 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY NANQIAO OUTSIDE,LINTING INDUSTRIAL PARK, CHENGHUA SHANTOU,GUANGDONG,515800 CHINA Request for Confidentiality Date: 10-08-2011 Subject: Confidentiality Request for: ： FCC ID XJH20110872515 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Cai Yong XI (Signature 3 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY NANQIAO OUTSIDE,LINTING INDUSTRIAL PARK, CHENGHUA SHANTOU,GUANGDONG,515800 CHINA Model Confirmation Letter We, GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY certify the product: HELICOPTER SERIES And item No.: 3319B 3319 3319A 3320 3310 3311 3312 3313 3315 3317 3363 3365 3369 3395 3396 3397 3398 3399 3387 3389 3376A 3376 3309 3318 3378A UJ301Their electrical circuit design, layout, components used and internal wiring are identical, Only the Item number is different. Agency Agreement Expiration Date: 10-08-2011 By: Cai Yong XI (Signature 1 ) (Print name) Title: Manger On behalf of:GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY Telephone: +86(0)88854756 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

1 Photographs - EUT Constructional Details

27MHZ Label SIZE:LxW=9cm X 4cm FCC ID： ：： ：XJH20110872515 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.

1 Photographs - EUT Constructional Details

Report No.: SZEM110800293401 Page : 1 of 11 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] FCC REPORT Application No. : SZEM1108002934RF Applicant: GUANGDONG SHANTOU CHENGHAI LINGTING YONGDA PLASTIC FACTORY Product Name: HELICOPTER SERIES Operation Frequency: 27.145MHz FCC ID: XJH20110872515 Standards: FCC PART 15, SUBPART C: 2010 Section 15.227 Date of Receipt: 2011-08-11 Date of Test: 2011-08-15 to 2011-08-16 Date of Issue: 2011-08-22 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Report No.: SZEM110800293401 Page : 2 of 11 SGS-CSTC Standards Technical Services Ltd. 2 Contents Page 1 COVER PAGE ..............................................................................................................................................1 2 CONTENTS ....................................................................................................................................................... 2 3 TEST SUMMARY ............................................................................................................................................. 3 4 GENERAL INFORMATION ............................................................................................................................. 4 4.1 CLIENT INFORMATION ...................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................... 4 4.3 E.U.T. ENVIRONMENT AND TEST MODES ........................................................................................................... 4 4.4 TEST LOCATION ............................................................................................................................................... 5 4.5 OTHER INFORMATION REQUESTED BY THE CUSTOMER ....................................................................................... 5 4.6 TEST FACILITY ................................................................................................................................................. 5 4.7 TEST INSTRUMENTS LIST .................................................................................................................................. 6 5 TEST RESULT & MEASUREMENT DATA ...................................................…

Text truncated - open the document above for the full version.

1 Photographs - Test Setup (Test model No.: 3319B) Radiated Emission