XJSACEI100GSM Mobile Phone

ACE i100 User's Manual FCC ID: XJSACEI100 FIYING TECHNOLOGY DEVELOPMENT CO.,LTD. 1 Contents CONTENTS ............................................................................................................................. 1 1 .PHONE APPEARANCE AND KEYS DESCRIPTION ........................................................................... 2 2. USE PHONE MEMORY CARD AS U DISK ...................................................................................... 2 3. WI-FI ...................................................................................................................................... 3 4. BLUETOOTH .............................................................................................................................. 5 5. GMAIL ...................................................................................................................................... 6 6. DIAL ...................................................................................................................................... 7 7. MESSAGE ............................................................................................................................... 8 9. BROWSER ............................................................................................................................. 12 10. RECORD ............................................................................................................................ 13 11. CLOCK ................................................................................................................................... 14 12. CALCULATOR ..................................................................................................................... 15 13. CAMERA ................................................................................................................................ 16 14. PICTURE STORAGE ................................................................................................................. 19 15. MUSIC ................................................................................................................................... 21 16. CALENDAR ............................................................................................................................ 22 17. RADIO ................................................................................................................................... 24 18. TV................ .................................................................................................................... 25 19. SETTING ................................................................................................................................ 25 20. NOTICES WHILE USING HANDSET ......................................................................................... 29 2 1 .Phone appearance and keys description Keys Function Home page • In any application or interface, press the key can return to home page interface. • Press on you can start the application that carried out recently. Menu • Press the key you can open action menu, and enable you to execute the action in recent interface or menu options Return • Press the key to return to previous interface, or close dialogue box, option menu, notice pad or screen keyboard. Search • Entering search interface, you can search relation contents of all contacts in phone. Power • Press on the key can open phone option menu, and you can select lock screen, close phone, or set phone to mute. Up key • Press the key to enlarge volume. • In mute state, press the key can set phone to vibration state. Down key • Press the to decrease volume. Front camera • If phone has front camera and enter front camera interface, you can change to front camera to self capture. 2. Use phone memory card as U disk If you want to send music, photo and other files to your memo card, you must first set the memo card as U disk. • Set memo card as U disk 1) Connect phone to PC by USB cable, and the notice icon will displayed in state bar. 2) Open notice panel. 3) In notice panel, click USB connection, then click “ open USB memo device”. 3 • Notice: if you select to open USB device while your phone connected to PC, the phone will not identify the memo card. You will can’t use some applications in phone, such as camera. • Unload U disk from PC. It is the same as connection, see next picture. 3.WI-FI WI-FI provides wireless LAN within a range of farthest 300 feet, if you want to use WIFI in your phone, you must connect to the wireless Access Point or hot point. • Note : the availability of WI-FI signal and cover range is decided by the number, basic structure, and the penetrating object by the other signal. Open WI-FI and linked to wireless network 1) Press home page> menu, then click setting > wireless & networks 2) Select WI-FI check box to open WI-FI, and phone can auto scan the available wireless network. 3) Click WI-FI setting, and the WI-FI network list will show the found WI-FI network name and the security setting( open network or encrypted in WEP、WPA/WPA2). If open the network notice in WI-FI setting, phone will display the icon in state bar after found an available open wireless network. 4) Click one of the WI-FI network to connect, when you select open network, phone will auto connect to it, if you select the one that encrypted in WEP、WPA/WPA2, you must input the corresponding password at first, then click connection. • Note: when the phone connected to the network, WIFI icon ()will displayed in state bar, and the rough signal strength will showed( the numbers of bright bar), if click the current connecting network, it will display WI-FI’s name, state, speed, signal strength, security message and IP address. If you want to remove the setting of wireless network, please click don’t save in the window, if you 4 want to connect again, and you must re-input the setting. • Notice： Unless you select not to save networ…

Text truncated - open the document above for the full version.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 21.06.07 Datum: 00.00.00 Seite 1 von 1 Date: 9 December 2011 Subject: Ad Hoc Mode Function Declaration FCC ID: XJSACEI100 To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 – 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, Name：Yuanjian Hu Position ：Engineering Manager Company ：FIYING TECHNOLOGY DEVELOPMENT CO.,LTD. Adress：Rm.2312,23/F.Metropolis tower,10Metroplos Driv Hung Hom, Kowloon,999077, HongKong Tel.: 0755-8395 4658 Fax.: 0755-8281 6028 E-Mail ：[email protected]

Dec Fed Aut FCC Re: Pur s requ 1: B 2: C 3: O 4: P 5: T Th e rele app Th e all a app Sin c FIY Co Titl cember 1, deral Comm thorization C ID: XJSA : Confiden suant to Se uests confid Block Diagra Circuit Diagra Operational D Parts List Tune Up Proc e above mat ased to the licant and p e Applicant u accompanyi lication. cerely, YING TEC ntact per e: Engine 2011 munication and Evalu ACEI100 ntiality Re ctions 0.457 ential treatm m am Description cedure terials conta e public. The rovide unjus understands ng docume n CHNOLO rson: Yua eering Ma n Commiss uation Divis quest 7 and 0.459 ment of infor ain trade se e public dis stified benef that pursua ntation will OGY DEV anjian Hu anager sion sion 9 of the Com rmation appl ecrets and p sclosure of t fits to its com nt to Rules 0 not be mad VELOPME mmission’s R ied this app proprietary these matte mpetitors. 0.457, disclo e before th ENT CO. Rules, the a lication as o information ers might be osure of this e date of th ,LTD. applicant he outlined belo not custom e harmful to s Application he Grant for ereby ow: marily o the n and r this

TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FRONT VIEW OF SAMPLE BACK VEIW OF SAMPLE ALL VIEW OF SAMPLE

Mod FCC Mad e FCC ID GSM el: ACE i10 ID: XJSAC e In China Label Lo M Mobile Ph 00 CEI100 ocation hone

Rm tha lab vis the Si n FIY m.2312,2 T We, FI at our d bel exce sible to t e battery ncerely y YING TEC 23/F.Me K Tel: 0755 IYING TE evice, FC pt the the user y. yours, CHNOLO tropolis Kowloon, 5‐83954 St ECHNOL CC ID: X battery rs as the OGY DEV tower,1 ,999077 4658; FAX tateme LOGY DE XJSACEI1 compar ey purch VELOPM 0Metro p , HongK X: 0755‐ ent EVELOPM 100, has rtment o hase the ENT CO. plos Driv Kong ‐828160 Date: 9 MENT CO no spac of this produc t .,LTD. v Hung H 028 9 December O.,LTD. s ce to pu device. ts and in Hom, r 2011 tates ut the It is nstall

OPEN VIEW OF SAMPLE-1 OPEN VIEW OF SAMPLE-2 GSM Antenna Wi-fi Antenna Bluetooth Antenna OPEN VIEW OF SAMPLE-3 INTERNAL VIEW OF SAMPLE – 1 INTERNAL VIEW OF SAMPLE – 2

Report No.: 11CS003R-HP-US-P03V01 Page: 1 of 99 SAR Test Report Product Name : Mobile Phone Model No. : ACE i100 FCC ID : XJSACEI100 Applicant : FIYING TECHNOLOGY DEVELOPMENT CO., LTD Address : Rm.2312, 23/F.Metropolis tower, 10Metroplos Driv Hung Hom, Kowloon, 999077, HongKong Date of Receipt : 01/12/2011 Date of Test : 05/12/2011 Issued Date : 07/12/2011 Report No. : 11CS003R-HP-US-P03V01 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 11CS003R-HP-US-P03V01 Page: 2 of 99 Test Report Certification Issued Date: 07/12/2011 Report No.: 11CS003R-HP-US-P03V01 Product Name : Mobile Phone Applicant : FIYING TECHNOLOGY DEVELOPMENT CO., LTD Address : Rm.2312, 23/F.Metropolis tower, 10Metroplos Driv Hung Hom, Kowloon, 999077, HongKong Manufacturer : FIYING TECHNOLOGY DEVELOPMENT CO., LTD Address : Rm.2312, 23/F.Metropolis tower, 10Metroplos Driv Hung Hom, Kowloon, 999077, HongKong Model No. : ACE i100 FCC ID : XJSACEI100 Brand Name : -- EUT Voltage : DC 3.7V Applicable Standard : FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Head: 0.881W/kg (Scaling SAR:0.923W/kg) Body: 0.793 W/kg Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Engineering Supervisor: Robin Wu) Approved By : (Engineering Manager: Marlin Chen) Report No.: 11CS003R-HP-US-P03V01 Page: 3 of 99 Laboratory Information We, QuieTek Corporation , are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 11CS003R-HP-US-P03V01 Page: 4 of 99 TABLE OF CONTENTS Description Page 1. General Information ................................................................................................. 6 1.1. EUT Description .................................................................................................. 6 1.2. Test Procedure .................................................................................................... 8 1.3. Test Environment ................................................................................................. 8 2. SAR Measurement System ...................................................................................... 9 2.1. DASY5 System Description ................................................................................. 9 2.1.1. Applications ................................................................................................... 10 2.1.2. Area Scans .................................................................................................... 10 2.1.3. Zoom Scan (Cube Scan Averaging) .............................................................. 10 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ......................................... 10 2.2. DASY5 E-Field Probe ........................................................................................ 11 2.2.1. Isotropic E-Field Probe Specification ............................................................. 11 2.3. Boundary Detection Unit and Probe Mounting Device ...................................... 12 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................ 12 2.5. Robot ................................................................................................................. 13 2.6. Light Beam Unit ................................................................................................. 13 2.7. Device Holder .................................................................................................... 14 2.8. SAM Twin Phantom ........................................................................................... 14 3. Tissue Simulating Liquid ....................................................................................... 15 3.1. The composition of the tissue simulating liquid ................................................. 15 3.2. Tissue Calibration Result ................................................................................... 16 3.3. Tissue Dielectric Parameters for Head and Body Phantoms ............................. 17 4. SAR Measurement Procedure ............................................................................... 18 4.1. SAR System Validation ...................................................................................... 18 4.1.1. Validation Dipoles ...............…

Text truncated - open the document above for the full version.

FCC Test Report Report No.: AGC17P111101F2A FCC ID : XJSACEI100 PRODUCT DESIGNATION : Mobile Phone BRAND NAME : N/A TEST MODEL : ACE i100 CLIENT : FIYING TECHNOLOGY DEVELOPMENT CO.,LTD DATE OF ISSUE : Dec.09, 2011 STANDARD(S) : FCC Part 22H & 24E Rules Attestation of Global Compliance Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC17P111101F2A Page 1 of 48 VERIFICATION OF COMPLIANCE Applicant: FIYING TECHNOLOGY DEVELOPMENT CO.,LTD Rm.2312,23/F.Metropolis tower,10Metroplos Driv Hung Hom, Kowloon,999077, HongKong Manufacturer: FIYING TECHNOLOGY DEVELOPMENT CO.,LTD Rm.2312,23/F.Metropolis tower,10Metroplos Driv Hung Hom, Kowloon,999077, HongKong Product Description: Mobile Phone Brand Name: N/A Model Name: ACEi100 FCC ID: XJSACEI100 Report Number: AGC17P111101F2A Date of Test: Dec.01, 2011 to Dec.08, 2011 We hereby certify that: The above equipment was tested by Attestation of Global Compliance Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2003 and TIA/EIA 603. The sample tested as described in this report is in compliance with the FCC Rules Part 22H and 24E The test results of this report relate only to the tested sample identified in this report. Tested By : Curoky Chen Dec.09, 2011 Reviewed By : Forrest Lei Dec.09, 2011 Approved By: Solger Zhang Dec.09, 2011 Report No.: AGC17P111101F2A Page 2 of 48 TABLE OF CONTENTS 1. GENERAL INFORMATION ............................................................................................................................ 4 1.1 PRODUCT DESCRIPTION ........................................................................................................................... 4 1.2 RELATED SUBMITTAL(S) / GRANT (S) ....................................................................................................... 4 1.3 TEST METHODOLOGY ............................................................................................................................... 4 1.4 TEST FACILITY ............................................................................................................................................ 5 1.5 MEASUREMENT INSTRUMENTS ............................................................................................................... 5 1.6 SPECIAL ACCESSORIES ............................................................................................................................ 5 1.7 EQUIPMENT MODIFICATIONS ................................................................................................................... 5 2. SYSTEM TEST CONFIGURATION ............................................................................................................... 6 2.1 EUT CONFIGURATION ................................................................................................................................ 6 2.2 EUT EXERCISE ........................................................................................................................................... 6 2.3 GENERAL TECHNICAL REQUIREMENTS ................................................................................................. 6 2.4 CONFIGURATION OF EUT SYSTEM ......................................................................................................... 6 3. SUMMARY OF TEST RESULTS ................................................................................................................... 7 4. DESCRIPTION OF TEST MODES ................................................................................................................. 7 5. OUTPUT POWER .......................................................................................................................................... 8 5.1 CONDUCTED OUTPUT POWER ................................................................................................................ 8 5.2 RADIATED OUTPUT POWER ..................................................................................................................... 9 6. SPURIOUS EMISSION ................................................................................................................................ 12 6.1 CONDUCTED SPURIOUS EMISSION ...................................................................................................... 12 6.2 RADIATED SPURIOUS EMISSION ........................................................................................................... 14 7. CONDUCTED EMISSION ............................................................................................................................ 17 7.1 MEASUREMENT METHOD ....................................................................................................................... 18 7.2 PROVISIONS APPLICABLE ...................................................................................................................... 18 Report No.: AGC17P111101F2A Page 3 of 48 7.3 MEASUREMENT RESULT ......................................................................................................................... 19 8. FREQUENCY STABILITY ............................................................................................................................ 21 8.1 MEASUREMENT METHOD ....................................................................................................................... 21 8.2 PROVISIONS APPLICABLE ...................................................................................................................... 21 8.3 MEASUREMENT RESULT ......................................................................................................................... 22 9. OCCUPIED BANDWIDTH .........................................................................…

Text truncated - open the document above for the full version.

CONDUCTED EMISSION RADIATED SPURIOUS EMISSION