XLM9955C1Amplifier for wireless telecommunications survey

MOBILE ANTENNAS Low Profi le Whipless Antennas Mobile Low Profi le Vertical Antennas The MLPV antennas provide superior pattern coverage for mobile and fi xed applications from 380 MHz to 5.8 GHz. Their design provides industry lead- ing wideband performance and reliability, with minimum loss and no tuning required. Dual band versions (MLPVDB series) are also available. All models feature an attractive, compact housing environmentally tested for both indoor or outdoor applications. Features • Attractive, low profi le design for maximum overhead clearance • Industry leading wideband performance provides outstanding coverage across multiple frequency bands with no tuning required • Mates with all 1-1/8”-18 thread mounts, including 3/4” mounts • Wideband, multi-band and no ground plane models available • Black over chrome base standard. Also available in white over chrome or black over black base • “Easy grip” HD models available Technical Data Maximum Power: 150 watts (all models, except UHF and dual band models) 100 watts (UHF and dual band models) Polarization: Vertical Nominal Impedance: 50 Ohm VSWR: < 1.5:1 < 2.0:1 (dual-band and UHF models) Ingress Protection: IP66 Color (add to prefi x to indicate choice): Black over chrome (prefi x not needed), black over black (B) or white over chrome (W). Mount Method: Compatible with most 1-1/8” - 18 thread mounts, including 3/4” hole mounts Mounting The following mounts are recommended with the MLPV antennas on the next page: ModelOptions MLFML195CHigh performance permanent 3/4” hole, 1-1/8”-18 thread mount. Includes 17 ft of Pro-Flex TM Plus 195 cable. Loose TNC male connector included. GMLFML195CHigh performance permanent 3-1/4” diameter magnetic base, 1-1/8”- 18 thread mount. Includes 12 ft of Pro-Flex TM Plus 195 cable terminated with TNC male connector (attached). MTPM8005/8” hole, 1-1/8”-18 thread mount for surfaces up to 1/2-inch thick. Terminates in an N, female connector. No cable.* MVP5/8” hole, vandal proof mount. No cable.* MMF3/4” hole, 1-1/8”-18 mount for frequencies above 1 GHz. Terminates in an SMA, male connector. No cable.* *Order cable assembly separately. BMLPV UHF Model WMLPVDB800/1900S MLPV800 BMLPV800HD PCTEL, Inc. WEB: www.antenna.com MOBILE ANTENNAS Low Profi le Whipless Antennas Antenna Electrical Specifi cations Model*Frequency RangeBandwidthGain*** MLPV380380-410 MHz30 MHzUnity MLPV406406-440 MHz34 MHzUnity MLPV430430-480 MHz50 MHzUnity MLPV450450-512 MHz62 MHzUnity MLPV698698-806 MHz108 MHzUnity MLPV700740-870 MHz130 MHz3 dBi*** MLPV800806-960 MHz154 MHz3 dBi*** BMLPV800HD806-960 MHz154 MHz3 dBi*** BMLPVDB700/2500698-960 MHz and 1710-2500 MHz262 MHz and 790 MHz3 dBi/4 dBi MLPVDB800/1900806-960 MHz and 1710-1990 MHz154 MHz and 280 MHz3 dBi/4 dBi BMLPVDB800/1900HD806-960 MHz and 1710-1990 MHz154 MHz and 280 MHz3 dBi/4 dBi MLPVDB800/1900S806-960 MHz and 1710-2500 MHz154 MHz and 790 MHz3 dBi/4 dBi MLPVDB902/2400902-928 MHz and 2400-2500 MHz26 MHz and 100 MHz3 dBi/4 dBi MLPVDB902/2400S902-928 MHz and 2400-2500 MHz26 MHz and 100 MHz3 dBi/4 dBi MLPV17001700-2700 MHz1000 MHz4 dBi*** MLPVDB24582.4-2.5 GHz and 4.9-5.9 GHz100 MHz / 1000 MHz3 dBi/4 dBi MLPV49004.9-5.9 GHz1000 MHz4 dBi Mechanical Specifi cations Model (all colors)*Antenna DimensionsWeight (Mass)Temperature Range MLPV3803.38” H x 1.5” OD0.31 lbs (.14 kg)-40º C to 70º C MLPV4063.38” H X 1.5” OD0.31 lbs (.14 kg)-40º C to 70º C MLPV4303.38” H X 1.5” OD0.31 lbs (.14 kg)-40º C to 70º C MLPV4503.38” H X 1.5” OD0.31 lbs (.14 kg)-40º C to 70º C MLPV6983.38” H X 1.5” OD0.31 lbs (.14 kg)-40º C to 70º C MLPV7002.4” H X 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C MLPV8002.4” H X 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C BMLPV800HD2.4” H x 1.5” W x 1.7” D (at the base)0.44 lbs (0.19 kg)-40º C to 70º C BMLPVDB700/25002.4” H x 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C MLPVDB800/19002.4” H X 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C BMLPV800/1900HD2.4” H x 1.5” W x 1.7” D (at the base)0.44 lbs (0.19 kg)-40º C to 70º C MLPVDB800/1900S1.79” H x 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C MLPVDB902/24002.4” H X 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C MLPVDB902/2400S1.79” H x 1.5” OD0.29 lbs (0.13 kg)-40º C to 70º C MLPV17001.79” H x 1.5” OD0.34 lbs (0.15 kg)-40º C to 70º C MLPVDB24581.79” H x 1.5” OD (at the base)0.34 lbs (0.15 kg)-40º C to 70º C MLPV4900**1.79” H x 1.5” OD (at the base)0.34 lbs (0.15 kg)-40º C to 70º C * To order black over black version, add the prefi x “B” to the part number. To order the white over chrome version, add the pre- fi x “W” to the part number. Not all models are available in black or white. Call Customer Service for availability. PCTEL, Inc. WEB: www.antenna.com

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13501 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory August 31, 2015 Digital Receiver Technology, Inc. 12409 Milestone Center Dr. Germantown, MD 20876 Dear Steve Hudson, Enclosed is the EMC Wireless test report for MPE measurements of the Digital Receiver Technology, Inc., DRT9955C-1, DRT9955C-3 as evaluated to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Part 1, Subpart I, Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Part 2, Subpart J, and RSS-102, Issue 4, March 2010. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Digital Receiver Technology, Inc.\EMC84362-MPE) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. Electromagnetic Compatibility Digital Receiver Technology, Inc. Cover Page DRT9955C-1, DRT9955C-3 MPE Limits MET Report: EMC84362-MPE © 2015, MET Laboratories, Inc. Page ii of vi DOC-EMC702 6/18/2009 RF Maximum Permissible Exposure (MPE) Report For Controlled and Uncontrolled Environments for the Digital Receiver Technology, Inc. DRT9955C-1, DRT9955C-3 Tested under the FCC Certification Rules contained in Title 47 of the CFR, Part 1 Subpart I & Part 2 Subpart J & RSS-102, Issue 4, March 2010 MET Report: EMC84362-MPE August 31, 2015 Prepared For: Digital Receiver Technology, Inc. 12409 Milestone Center Dr. Germantown, MD 20876 Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Electromagnetic Compatibility Digital Receiver Technology, Inc. Cover Page DRT9955C-1, DRT9955C-3 MPE Limits MET Report: EMC84362-MPE © 2015, MET Laboratories, Inc. Page iii of vi DOC-EMC702 6/18/2009 RF Maximum Permissible Exposure (MPE) Report For Controlled and Uncontrolled Environments for the Digital Receiver Technology, Inc. DRT9955C-1, DRT9955C-3 Tested under the FCC Certification Rules contained in Title 47 of the CFR, Part 1 Subpart I & Part 2 Subpart J & RSS-102, Issue 4, March 2010 Benjamin Taylor, Project Engineer Jennifer Warnell Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules Parts 1 and 2, and Industry Canada standards RSS-102, Issue 4, March 2010 under normal use and maintenance. Asad Bajwa, Director, Electromagnetic Compatibility Lab Electromagnetic Compatibility Digital Receiver Technology, Inc. Report Status DRT9955C-1, DRT9955C-3 MPE Limits MET Report: EMC84362-MPE © 2015, MET Laboratories, Inc. Page iv of vi DOC-EMC702 6/18/2009 Report Status Sheet Revision Report Date Reason for Revision  August 31, 2015 Initial Issue. 1 August 31, 2015 Revised to reflect engineer corrections. 2 September 1, 2015 Revised to reflect additional corrections. Electromagnetic Compatibility Digital Receiver Technology, Inc. Table of Contents DRT9955C-1, DRT9955C-3 MPE Limits MET Report: EMC84362-MPE © 2015, MET Laboratories, Inc. Page v of vi DOC-EMC702 6/18/2009 Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. MPE Measurements and Applicable Regulations ...............................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview .............................................................................................................................................................4 B. Test Site ..............................................................................................................................................................4 C. Description of Test Sample .................................................................................................................................5 D. Equipment Configuration ....................................................................................................................................6 E. Support Equipment .............................................................................................................................................6 F. Mode of Operation ..............................................................................................................................................6 G. Modifications ......................................................................................................................................................6 a) Modifications to EUT .................................................................................................................... 6 b) M…

Text truncated - open the document above for the full version.

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13501 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 The Nation’s First Licensed Nationally Recognized Testing Laboratory September 28, 2015 Digital Receiver Technology, Inc. 12409 Milestone Center Dr. Germantown, MD 20876 Dear Steve Hudson, Enclosed is the EMC Wireless test report for compliance testing of the Digital Receiver Technology, Inc., DRT9955C-1 as tested to the requirements of the FCC Certification rules under Title 47 of the CFR Part 22 Subpart H for Cellular Devices and FCC Part 24 Subpart E for Broadband PCS Devices. Thank you for using the services of MET Laboratories, Inc. If you have any questions regarding these results or if MET can be of further service to you, please contact me. Sincerely yours, MET LABORATORIES, INC. Jennifer Warnell Documentation Department Reference: (\Digital Receiver Technology, Inc.\EMC84362-FCC22_24 Rev. 1) Certificates and reports shall not be reproduced except in full, without the written permission of MET Laboratories, Inc. MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 354-3300 • FAX (410) 354-3313 33439 WESTERN AVENUE • UNION CITY, CALIFORNIA 94587 • PHONE (510) 489-6300 • FAX (510) 489-6372 3162 BELICK STREET • SANTA CLARA, CA 95054 • PHONE (408) 748-3585 • FAX (510) 489-6372 13501 MCCALLEN PASS • AUSTIN, TEXAS 78753 • PHONE (512) 287-2500 • FAX (512) 287-2513 MET Report: EMC26033-FCC22 Rev. 2 © 2015, MET Laboratories, Inc. Page ii of vii Electromagnetic Compatibility Criteria Test Report for the Digital Receiver Technology, Inc. Model DRT9955C-1 Tested under FCC Certification Rules Title 47 of the CFR, Part 22 Subpart H for Cellular Devices & Part 24 Subpart E for Broadband PCS Devices MET Report: EMC84362-FCC22_24 Rev. 1 September 28, 2015 Prepared For: Digital Receiver Technology, Inc. 12409 Milestone Center Dr. Germantown, MD 20876 Prepared By: MET Laboratories, Inc. 914 W. Patapsco Ave Baltimore, MD 21230 Electromagnetic Compatibility Digital Receiver Technology, Inc. Cover Page DRT9955C-1 CFR Title 47 Part 22 Subpart H & Part 24 Subpart E MET Report: EMC84362-FCC22_24 Rev. 1 © 2015, MET Laboratories, Inc. Page iii of vii Electromagnetic Compatibility Criteria Test Report for the Digital Receiver Technology, Inc. Model DRT9955C-1 Tested Under FCC Certification Rules Title 47 of the CFR, Part 22 Subpart H for Cellular Devices & Part 24 Subpart E for Broadband PCS Devices Benjamin Taylor Jennifer Warnell Project Engineer, Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of Part 22 Subpart H and Part 15 Subpart B of the FCC Rules under normal use and maintenance. Asad Bajwa, Director, Electromagnetic Compatibility Lab Electromagnetic Compatibility Digital Receiver Technology, Inc. Report Status DRT9955C-1 CFR Title 47 Part 22 Subpart H & Part 24 Subpart E MET Report: EMC84362-FCC22_24 Rev. 1 © 2015, MET Laboratories, Inc. Page iv of vii Report Status Sheet Revision Report Date Reason for Revision  August 31, 2015 Initial Issue 1 September 28, 2015 Updated to include power measurement data in tabular format. Electromagnetic Compatibility Digital Receiver Technology, Inc. Table of Contents DRT9955C-1 CFR Title 47 Part 22 Subpart H & Part 24 Subpart E MET Report: EMC84362-FCC22_24 Rev. 1 © 2015, MET Laboratories, Inc. Page v of vii Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary ............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview .............................................................................................................................................................4 B. References ...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................5 D. Description of Test Sample .................................................................................................................................5 E. Equipment Configuration ....................................................................................................................................6 F. Support Equipment .............................................................................................................................................6 G. Mode of Operation .........................................…

Text truncated - open the document above for the full version.