XMQEOS-P622Dual Zone Wireless Speaker

commercial wireless audio TM EOSP-622 Dual Zone Wireless Speaker User Manual 2 We hope you will get much enjoyment from your wireless audio system. Please read the entire contents of this manual. It is filled with reference information that will allow you to get the most from your new Eos system. If you have any questions, please check our web site at pro.eoswireless.com/support or call us at 877-465-3927. Your Total Satisfaction – Eos Job #1 Congratulations on your purchase of the Eos Digital Pro Series Audio System. We are commit- ted to making sure your experience is problem free. If you experience any difficulty and/or have any questions regarding the Eos system that are not addressed in this manual, please feel free to contact the Eos Technical Support Team, toll- free, at 877-465-3927 (between the hours of 8:30 AM and 5 PM pacific time.) Our Eos Support Team aims to offer quick, comprehensive and thorough technical support to all our users. Before you call, please make sure you have your Eos unit model number and serial number on hand. Thank You For Choosing Eos Wireless! 877-465-3927 www.eoswireless.com/pro commercial wireless audio TM 3 Thank You For Choosing Eos Wireless! Table Of Contents Contents Important Safety Instructions 4 FCC Information 5 Limited Warranty 6 Product Support 6 Wireless System Setup 7 Linking Procedure 7 Adding Additional Wireless Speakers/Receivers 7 Controls & Functions 8 Wireless Speaker Operation 9 Channel Switch 9 Volume Control 9 Zone Switch 9 Link Button 9 IR Remote Control 9 Wireless Speaker Sleep Mode 9 Mounting Options 10 Wall Outlet Mounting 10 Wall Outlet Mounting on Inverted Outlets 10 Removing the integrated power supply 10 Mounting Options 11 Wall Mounting 11 Hiding Power Cords 11 4 Important Safety Instructions Please take the time to follow the instructions in this manual carefully. It will help you set up and operate your system properly and enjoy all of the advanced features. Please save this manual for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. Avoid prolonged exposure to direct sunlight. WARNING: Liquids can cause a failure and/or a fire hazard. The unit should not be exposed to liquid dripping or splashing. Avoid placing objects filled with liquids, such as coffee cups, soda cans or vases on the unit. As with any electronic product, use care not to spill liquids into any part of the system. WARNING: No open flame sources, such as lighted candles, should be placed on the unit. Note: The product label is located on the bottom of the product. This product is intended to be used only with the power supply provided. Using another power supply can cause damage to the unit. This product is intended for indoor use. If used outdoors, care should be exercised in placing the product in an area that is well sheltered from the outdoor environment. Safety Instructions 1. Read instructions before using this product. 2. Keep these instructions for future reference. 3. Heed all warnings on the product and in the manual. 4. Follow all instructions. 5. Do not use this unit near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present. 6. Clean only with a dry cloth and as directed by IntelliTouch. Unplug this product from the power supply before cleaning. 7. Avoid prolonged exposure to direct sunlight or heat. 8. Do not install near any heat sources, such as radiators, heat registers, stoves or other unit (including amplifiers) that produce excess heat. 9. Only use attachments/accessories specified by the manufacturer. 10. Unplug this unit during lightning storms or when unused for long periods of time – to prevent possible damage to this product. 11. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way such as: power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the unit; the unit has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not attempt to service this product yourself. 12. Opening or removing covers may expose you to dangerous voltages or other hazards. 13. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. 14. Do not let objects or liquids enter the product as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. 15. Use proper power sources - Plug the product into a proper power source, as described in this manual or as marked on the product. A Consumer Guide to Product Safety 5 A Consumer Guide to Product Safety FCC Information Information about products that generate electrical noise if applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu- nications. However, this is no guarantee that interference will not occur in a particular installa- tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the transmitter and/or receiver. • Increase the separation between the equipment and transmitter and/or receiver. • Connect the equipment to an outlet on a different circuit than the one to which the transmitter and/or receiver is connected. • Consult the dealer or an experienced ra…

Text truncated - open the document above for the full version.

6370 Nancy RiGJH'U‡6DQ'LHJR‡&$‡‡)$; Letter of Agency I, an officer of IntelliTouch do hereby authorize Intertek Testing Services (Mr. Terry Chan) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 29 day of August 2012_ By Signature Jeff O'Shea Printed Name CTO Title

1DQF\5LGJH'U‡6DQ'LHJR‡&$‡‡)$; Attention: Application Examiner Re: Request for confidentiality Applicant: IntelliTouch FCC ID: XMQEOS-P500 XMQEOS-P610 XMQEOS-P622 To whom it may concern, Permanent Confidentiality Request is hereby submitted by IntelliTouch to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: x Schematics x Detailed Block diagrams x Detailed Operational/Functional Description Rationale for request for confidentiality: IntelliTouch has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. The fee for confidentiality has been submitted along with the fee for certification. If you have questions or need further information, please contact the undersigned. Sincerely, Jeff O'Shea CTO IntelliTouch

INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model : EOSP-622 (External) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model : EOSP-622 (External)

INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal) INTERTEK TESTING SERVICE Report No.: HK12071473-1 FCC ID: XMQEOS-P622 Equipment Photographs Model: EOSP-622 (Internal)

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: HK12071473-1 IntelliTouch Application For Certification (Original Grant) (FCC ID: XMQEOS-P622) Transceiver Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Engineer Chan Chi Hung, Terry Assistant Supervisor Date: September 04, 2012 INTERTEK TESTING SERVICES Report No.: HK12071473-1 FCC ID: XMQEOS-P622 i GENERAL INFORMATION IntelliTouch BRAND NAME: IntelliTouch, MODEL: EOSP-622 FCC ID: XMQEOS-P622 Grantee: IntelliTouch Grantee Address: 6370 Nancy Ridge Dr., Stc. 105, San Diego, CA 92121, United States. Contact Person: Jeff O’Shea Tel: 858-457-3300 Fax: 858-457-3311 e-mail: N/A Manufacturer: Victory Telecom (Huizhou) Ltd Manufacturer Address: Building A, No 18, ShuiYuan Industrial District, RuHu Town, Hui Zhou City 516021, GuangDong Province, P.R. China. Brand Name: IntelliTouch Model: EOSP-622 Type of EUT: Transceiver Description of EUT: Dual Zone Wireless Speaker Serial Number: N/A FCC ID: XMQEOS-P622 Date of Sample Submitted: July 31, 2012 Date of Test: August 24, 2012 Report No.: HK12071473-1 Report Date: September 04, 2012 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: HK12071473-1 FCC ID: XMQEOS-P622 ii SUMMARY OF TEST RESULT IntelliTouch BRAND NAME: IntelliTouch, MODEL: EOSP-622 FCC ID: XMQEOS-P622 TEST SPECIFICATION REFERENCE RESULTS Maximum Peak Output Power 15.247(b), (c) / RSS-210 A8.4 N/A Hopping Channel Carrier Frequencies Separation 15.247(e) / RSS-210 A8.1 N/A 20dB Bandwidth of the Hopping Channel 15.247(a) / RSS-210 A8.1 N/A Number of Hopping Frequencies 15.247(e) / RSS-210 A8.1 N/A Average Time of Occupancy of Hopping Frequency 15.247(e) / RSS-210 A8.1 N/A Antenna Conducted Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A Radiated Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A RF Exposure Compliance 15.247(i) / RSS-Gen 5.6 N/A Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.4 Pass Transmitter Field Strength 15.227 / RSS-310 3.8 N/A Transmitter Field Strength 15.229 / RSS-210 A2.7 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(a) / RSS-210 A1.1.1 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(e) / RSS-210 A1.1.5 N/A Transmitter Field Strength and Bandwidth Requirement 15.239 / RSS-210 A2.8 N/A Transmitter Field Strength and Bandwidth Requirement 15.249 / RSS-210 A2.9 Pass Transmitter Field Strength and Bandwidth Requirement 15.235 / RSS-310 3.9 N/A Receiver / Digital Device Radiated Emissions 15.109 / RSS-210 2.5 N/A Digital Device Conducted Emissions 15.107 / ICES-003 N/A Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: HK12071473-1 FCC ID: XMQEOS-P622 iii Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 1 1.4 Test Facility .................................................................................................. 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification................................................................................................... 2 2.2 EUT Exercising Software .............................................................................. 2 2.3 Special Accessories...................................................................................... 2 2.4 Equipment Modification................................................................................. 2 2.5 Measurement Uncertainty ............................................................................. 2 2.6 Support Equipment List and Description........................................................ 2 3.0 Emission Results ........................................................................................... 3 3.1 Field Strength Calculation .........................................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES Report No.: HK12071473-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 100 ms PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Conducted Plot – Pursuant to FCC Part 15 Requirement (Pass/Fail)

INTERTEK TESTING SERVICES Report No.: HK12071473-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) Bandwidth / Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement (Pass/Fail) Antenna 1 Lower bandedge = 108.3 – 43.2 = 65.1 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Lower bandedge = 85.0 – 43.2 = 41.8 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) Antenna 1 Upper bandedge = 108.5 – 52.6 = 55.9 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Upper bandedge = 85.1 – 52.6 = 32.5 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) INTERTEK TESTING SERVICES Report No.: HK12071473-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) Bandwidth / Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement (Pass/Fail) Antenna 2 Lower bandedge = 107.3 – 40.8 = 66.5 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Lower bandedge = 84.6 – 40.8 = 43.8 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) Antenna 2 Upper bandedge = 108.0 – 51.4 = 56.6 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Upper bandedge = 85.6 – 51.4 = 34.2 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit)

INTERTEK TESTING SERVICE Report No: HK12071473-1 FCC ID: XMQEOS-P622 Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: EOSP-622 HK12071473-1 EOSP-622 Side A INTERTEK TESTING SERVICE Report No: HK12071473-1 FCC ID: XMQEOS-P622 Configuration Photographs Worst-Case Radiated Emissions (Rear View) Model: EOSP-622 HK12071473-1 EOSP-622 Side B

INTERTEK TESTING SERVICE Report No: HK12071473-1 FCC ID: XMQEOS-P622 i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: EOSP-622 INTERTEK TESTING SERVICE Report No: HK12071473-1 FCC ID: XMQEOS-P622 ii Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) Model: EOSP-622 INTERTEK TESTING SERVICE Report No: HK12071473-1 FCC ID: XMQEOS-P622 iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: EOSP-622