XUJCRP123XProfessional Diagnostic Tool

LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Professional Diagnostic Tool with model Creader Professional 123X, Creader Professional 123x, Creader Professiona 129x, Creader Professional 233, Creader Professional 239, Creader Professional 123xyz, Creader Professional 129xyz, Creader Professional Elite, CRP TOUCH PRO ELITE(" x or y or z"= any English letter or blank) (FCC ID: XUJCRP123X) has also been tested against this SAR limit. The highest reported SAR values for body-worn is 1.16W/kg. The use of accessories with metallic c omponentsthat may not comply with FCC RF exposure r equirements, and should be avoided.

Launch Tech Co., Ltd. Date: 20 21 -08-04 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: XUJCRP123X To Whom It May Concern: This letter is to statement that Creader Professional 123X, Creader Professional 123x, Creader Professiona 129x, Creader Professional 233, Creader Professional 239, Creader Professional 123xyz, Creader Professional 129xyz, Creader Professional Elite, CRP TOUCH PRO ELITE(" x or y or z"= any English letter or blank) / Professional Diagnostic Tool. has been tested according to FCC Part 15B by Waltek Testing Group Co., Ltd. (Test Report No.: WTD21D07068807E). And the SDOC file, meetting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Sincerely, Signature [Yibing Xue] [Manager] [Launch Tech Co., Ltd.]

Launch Tech Co., Ltd. FCC ID: XUJCRP123X Date: 8/4/2021 Subject: authorization for adding family models To whom it May concern, Statement We would like to confirm the product Creader Professional 123X, Creader Professional 123x, Creader Professiona 129x, Creader Professional 233, Creader Professional 239, Creader Professional 123xyz, Creader Professional 129xyz, Creader Professional Elite, CRP TOUCH PRO ELITE(" x or y or z"= any English letter or blank) are same in all respects which include physical dimensions of the various models and Internal structure. Only the model names, colors of shell and rubble cover are different for different market requirement. Yours sincerely, [signature] [Yibing Xue] [Manager] [Launch Tech Co., Ltd.]

Launch Tech Co., Ltd. FCC ID: XUJCRP123X POWER OF ATTORNEY Date: Aug. 04, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Aug. 03, 2022. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Launch Tech Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Launch Tech Co., Ltd. Signature Yibing Xue / Manager Typed name and Title

Launch Tech Co., Ltd. Date: Aug. 04, 2021 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XUJCRP123X Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description Schematics.pdf Block Diagram.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Launch Tech Co., Ltd. Signature Yibing Xue / Manager Typed name and Title

Appendix-Creader Professional 123X-Photos Page 3 of 18 EUT – External View Model Creader Professional 123X FCC ID: XUJCRP123X Appendix-Creader Professional 123X-Photos Page 4 of 18 Appendix-Creader Professional 123X-Photos Page 5 of 18 Appendix-Creader Professional 123X-Photos Page 6 of 18 Appendix-Creader Professional 123X-Photos Page 7 of 18 Appendix-Creader Professional 123X-Photos Page 8 of 18

Creader Professional 123x Label Sample and Location

Appendix-Creader Professional 123X-Photos Page 17 of 18 Appendix-Creader Professional 123X-Photos Page 18 of 18 ======End======

Appendix-Creader Professional 123X-Photos Page 13 of 18 Appendix-Creader Professional 123X-Photos Page 14 of 18 Appendix-Creader Professional 123X-Photos Page 15 of 18 Appendix-Creader Professional 123X-Photos Page 16 of 18

Appendix-Creader Professional 123X-Photos Page 9 of 18 EUT – Internal View Model Creader Professional 123X FCC ID: XUJCRP123X 2.4G WiFi ANT Appendix-Creader Professional 123X-Photos Page 10 of 18 Appendix-Creader Professional 123X-Photos Page 11 of 18 Appendix-Creader Professional 123X-Photos Page 12 of 18

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 79 TEST REPORT Referen ce No. .................... : WTD21D07068804W002 V2 FCC ID ................................ : XUJCRP123X Applicant ............................ : Launch Tech Co., Ltd Address .............................. : Launch Industrial Park, North of Wuhe Road, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, P.R. China Manufacturer .................... : Launch Tech Co., Ltd Address .............................. : Launch Industrial Park, North of Wuhe Road, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, P.R. China Product ............................... : Professional Diagnostic Tool Model(s). ............................ : Creader Professional 123X, Creader Professional 123x, Creader Professiona 129x, Creader Professional 233, Creader Professional 239, Creader Professional 123xyz, Creader Professional 129xyz, Creader Professional Elite, CRP TOUCH PRO ELITE(" x or y or z"= any English letter or blank) Standards........................... : FCC CFR47 Part 15.247 Date of Receipt sample .... : 2021-07-13 Date of Test ....................... : 2021-07-13 to 2021-07-27 Date of Issue ...................... : 2021-08-10 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Andy Feng / Project Engineer Daniel Liu / Designated Reviewer Reference No.: WTD21D07068804W002 V2 Page 2 of 79 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................ 4 4.2 DETAILS OF E.U.T. ......................................................................................................................................... 4 4.3 CHANNEL LIST ................................................................................................................................................. 5 4.4 TEST MODE ..................................................................................................................................................... 6 4.5 TEST FACILITY ................................................................................................................................................. 7 5 TEST SUMMARY .................................................................................................................................................. 8 6 EQUIPMENT USED DURING TEST .................................................................................................................. 9 6.1 EQUIPMENTS LIST ........................................................................................................................................... 9 6.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................... 10 6.3 MEASUREMENT UNCERTAINTY ..................................................................................................................... 10 6.4 TEST EQUIPMENT CALIBRATION ................................................................................................................... 10 7 DUTY CYCLE ....................................................................................................................................................... 11 8 RADIATED EMISSIONS..................................................................................................................................... 14 8.1 EUT OPERATION ........................................................................................................................................... 14 8.2 TEST SETUP .................................................................................................................................................. 15 8.3 SPECTRUM ANALYZER SETUP ...................................................................................................................... 16 8.4 TEST PROCEDURE ........................................................................................................................................ 17 8.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ..................................................................................... 17 8.6 SUMMARY OF TEST RESULTS ....................................................................................................................... 18 9 CONDUCTED SPURIOUS EMISSIONS .......................................................................................................... 31 9.1 TEST PROCEDURE ........................................................................................................................................ 31 9.2 TEST RESULT ...........................................................................…

Text truncated - open the document above for the full version.

Waltek Testing Group Co., Ltd. Page 1 of 57 http://www.waltek.com.cn SAR TEST REPORT Reference No. ................... : WTD21D07068804W001 V1 FCC ID ................................ : XUJCRP12 3X Applican t ........................... : Launch Tech Co., Ltd Address ............................. : Launch Industrial Park, North of Wuhe Road, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, P.R. China Manufacturer .................... : Launch Tech Co., Ltd Address ............................. : Launch Industrial Park, North of Wuhe Road, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, P.R. China Product .............................. : Professional Diagnostic Tool Model(s). ............................ : Creader Professional 123X, Creader Professional 123x, Creader Professiona 129x, Creader Professional 233, Creader Professional 239, Creader Professional 123xyz, Creader Professional 129xyz, Creader Professional Elite, CRP TOUCH PRO ELITE(" x or y or z"= any English letter or blank) Standards .......................... : FCC 47 CFR Part2(2.1093) ANSI/IEEE C95.1-2006 IEEE 1528-2013 & Published RF Exposure KDB Procedures Date of Receipt sample .... : 2021-07-13 Date of Test ....................... : 2021-07-13 to 2021-07-27 Date of Issue ..................... : 2021-08-10 Test Result ........................ : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Andy Feng / Project Engineer Daniel Liu / Designated Reviewer Reference No.: WTD21D07068804W001 V1 Page 2 of 57 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ........................................................................................................................................... 3 4 GENERAL INFORMATION ................................................................................................................................ 4 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................... 4 4.2 DETAILS OF E.U.T. .......................................................................................................................................... 4 5 EQUIPMENT USED DURING TEST .................................................................................................................. 5 5.1 EQUIPMENT LIST .............................................................................................................................................. 5 5.2 TEST EQUIPMENT CALIBRATION ...................................................................................................................... 5 6 SAR INTRODUCTION.......................................................................................................................................... 6 6.1 INTRODUCTION ................................................................................................................................................ 6 6.2 SAR DEFINITION .............................................................................................................................................. 6 7 SAR MEASUREMENT SETUP ............................................................................................................................ 7 8 EXPOSURE LIMIT ............................................................................................................................................. 16 9 SYSTEM AND LIQUID VALIDATION ............................................................................................................ 17 9.1 SYSTEM VALIDATION ..................................................................................................................................... 17 9.2 LIQUID VALIDATION ....................................................................................................................................... 19 10 TYPE A MEASUREMENT UNCERTAINTY .................................................................................................. 22 11 OUTPUT POWER VERIFICATION ................................................................................................................. 25 12 EXPOSURE CONDITIONS CONSIDERATION ............................................................................................. 27 13 SAR TEST RESULTS .......................................................................................................................................... 29 14 SAR MEASUREMENT REFERENCE ............................................................................................................. 32 MAXIMUM SAR MEASUREMENT PLOTS ................................................................................................................... 33 15 CALIBRATION REPORTS-PROBE AND DIPOLE ....................................................................................... 34 16 SETUP PHOTOS .................................................................................................................................................. 56 17 EUT PHOTOS .......................................................................…

Text truncated - open the document above for the full version.

Appendix-Creader Professional 123X-Photos Page 1 of 18 Photographs –Constructional Details WIFI Setup photo Model Creader Professional 123X FCC ID: XUJCRP123X Photograph - Spurious Emissions Radiated Test Setup Below 30MHz Test Site 2# For 30MHz-1000MHz Test Site 2# Appendix-Creader Professional 123X-Photos Page 2 of 18 For Above 1GHz Test Site 1#