XUJCRP229AAutomotive diagnosis computer

Version: V1.00.000 Revised date: 04-10-2014 II LAUNCH CRP229 User's Manual Copyright Information Copyright © 2013 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this information as applied to other units. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. Trademark Information LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called LAUNCH for short) in China and other countries. All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact LAUNCH by visiting the website at www.cnlaunch. com, or writing to LAUNCH TECH. CO., LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual. Safety Precautions Before using CRP229, please read the following safety information carefully. Never collide, throw, or punch CRP229, and avoid falling, extruding and • blending it. Do not use CRP229 in exceptionally cold or hot, dusty, damp or dry • environments. To ensure a safe driving, please do not use CRP229 while driving.• Turn off CRP229 before boarding any airplane. • Do not dismantle CRP229 by yourself. If there is any inquiry, please • contact the dealer. Never place CRP229 into apparatus with strong electromagnetic field.• Keep CRP229 far away from magnetic devices because its radiations • may erase the data stored on CRP229. Store CRP229 out of reach of children and do not allow children to use it • LAUNCH CRP229 User's Manual III unsupervised. Please use the included battery and charger. Otherwise, explosion may • happen. Do not disconnect power abruptly when CRP229 is being formatted or • in process of uploading or downloading. Or else it may result in program error. Precautions on Operating Vehicle’s ECU Do not disconnect the vehicle inner consumer when the ignition • switch is on. High voltage transients may encounter at the moment of disconnecting, which may damage the sensors and the ECU. Protect the computer from magnetic object.• Do cut off the power supply of ECU system before welding on the • vehicle. Pay more attention to the ECU and the sensors when the operation is • next to them. Do connect ECU harness connector firmly, otherwise electronic • elements, such as IC inside ECU, will be damaged. Table of Contents 1 Introduction ...........................................................................................1 1.1 Product Profile .....................................................................................1 1.2 Features ..............................................................................................1 1.3 Technical Specifications ......................................................................1 2 Knowledge of CRP229 .........................................................................2 2.1 CRP229 Display Tablet ........................................................................2 2.2 CRP229 Accessory Checklist ..............................................................3 3 Preparations..........................................................................................4 3.1 Charging CRP229 ...............................................................................4 3.2 On Using Your Battery .........................................................................4 3.3 Power On / Power Off CRP229 ..........................................................4 3.3.1 Power on ....................................................................................4 3.3.2 Power off ....................................................................................4 3.4 Tips On Finger Operations ..................................................................4 3.5 Lock & unlock the screen ....................................................................4 3.5.1 Lock the screen ..........................................................................5 3.5.2 Unlock the screen ......................................................................5 3.6 Screen Layout .....................................................................................5 3.7 Status Bar ............................................................................................5 3.8 Notification bar..................…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 4.0 Launch Tech Co., Ltd. 2014/6/20 To: SIEMIC, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _____ Launch Tech Co., Ltd. _____hereby authorize SIEMIC, Inc. to act as Certification Body for certifying for the following project(s): Product description： Automotive diagnosis computer FCC ID: XUJCRP229A Model: Creader professional229, CRP229、CRP221、CRP223、CRP225、CRP226、CRP228 We affirm that between SIEMIC, Inc. and ____ Launch Tech Co., Ltd. ___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Yibing Xue Contact information / address : Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Launch Tech Co., Ltd. 2014/6/20 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: XUJCRP229A We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Yibing Xue Contact information / address : Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China

Launch Tech Co., Ltd. To：SIEMIC , 775 Montague Expressway, Milpitas, CA 95035,USA Declaration Letter Dear Sir， For our business issue and marketing requirement, we would like to list the following model numbers on The CE certificates and reports, as following: Model No.: Creader professional229, CRP229、CRP221、CRP223、CRP225、CRP226、CRP228 We declare that the difference of these is listed as below: Main Model No Serial Model No Difference Creader professional229 CRP229、CRP221、CRP223、CRP225、 CRP226、CRP228 1. Label 2. Color of gum cover 3. Without some adaptors 4. Without USB cable Thank you! Client’s signature： Client’s name / title： Yibing Xue/ Manager Contact information / address：Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China

Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 19 of 35 www.siemic.com www.sinmic.com.cn Annex B. EUT AND TEST SETUP PHOTOGRAPHS Annex B.i. Photograph 1: EUT External Photo Whole Package - Top View Adapter – Front View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 20 of 35 www.siemic.com www.sinmic.com.cn EUT - Front View EUT - Rear View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 21 of 35 www.siemic.com www.sinmic.com.cn EUT - Top View EUT - Bottom View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 22 of 35 www.siemic.com www.sinmic.com.cn EUT - Left View EUT - Right View

Label location

Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 23 of 35 www.siemic.com www.siemic.com.cn Annex B.i. Photograph 2: EUT Internal Photo Cover Off - Top View Mainboard - Top View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 24 of 35 www.siemic.com www.siemic.com.cn Mainboard - Rear View RF PCB with Shielding- Top View Antenna View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 25 of 35 www.siemic.com www.siemic.com.cn RF PCB without Shielding- Top View RF PCB - Rear View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 26 of 35 www.siemic.com www.siemic.com.cn LCD Board – Front View LCD Board – Reart View Title: EMC Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15 Subpart B Class B: 2013 , ANSI C63.4:2009 Report No.: 14070260-FCC-E1 Issue Date: Jun18, 2014 Page: 27 of 35 www.siemic.com www.siemic.com.cn Battery - Front View Battery - Rear View

Launch Tech Co., Ltd. Automotive diagnosis computer Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 June. 9th, 2014 Report No.: 14070260-FCC-H (This report supersedes NONE) This Test Report is Issued Under the Authority of: Chris You Test Engineer Alex Liu Technical Manager Modifications made to the product : None This test report may be reproduced in full only. All Test Data Presented in this report is only applicable to presented Test sample. Title: SAR Test Report of Tablet Computer Model : Creader professional229 To C95.1, IEEE 1528:2013, IEC62209-2:2010 & RSS-102 Issue 4 and Safety Code 6 Serial# 14070260-FCC-H Issue Date June 9th, 2014 Page 2 of 54 www.siemic.com Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China , Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . SIEMIC (Shenzhen-China) Laboratories Accreditations for Conformity Assessment Country/Region Scope USA EMC , RF/Wireless , Telecom Canada EMC, RF/Wireless , Telecom Taiwan EMC, RF, Telecom , Safety Hong Kong RF/Wireless ,Telecom Australia EMC, RF, Telecom , Safety Korea EMI, EMS, RF , Telecom, Safety Japan EMI, RF/Wireless, Telecom Singapore EMC , RF , Telecom Europe EMC, RF, Telecom , Safety Title: SAR Test Report of Tablet Computer Model : Creader professional229 To C95.1, IEEE 1528:2013, IEC62209-2:2010 & RSS-102 Issue 4 and Safety Code 6 Serial# 14070260-FCC-H Issue Date June 9th, 2014 Page 3 of 54 www.siemic.com This page has been left blank intentionally. Title: SAR Test Report of Tablet Computer Model : Creader professional229 To C95.1, IEEE 1528:2013, IEC62209-2:2010 & RSS-102 Issue 4 and Safety Code 6 Serial# 14070260-FCC-H Issue Date June 9th, 2014 Page 4 of 54 www.siemic.com CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION .............................................................................................................. 6 2 TECHNICAL DETAILS ................................................................................................................................................... 7 3 INTRODUCTION ........................................................................................................................................................... 8 4 SAR MEASUREMENT SETUP ....................................................................................................................................... 9 5 ANSI/IEEE C95.1 – 1999 RF EXPOSURE LIMIT ............................................................................................................ 20 6 SYSTEM AND LIQUID VALIDATION ............................................................................................................................ 21 7 UNCERTAINTY ASSESSMENT .................................................................................................................................... 25 8 TEST INSTRUMENT .................................................................................................................................................... 28 9 OUTPUT POWER VERIFICATION ................................................................................................................................ 29 10 SAR TEST RESULTS .................................................................................................................................................. 30 11 SAR MEASUREMENT REFERENCES .......................................................................................................................... 31 ANNEX A CALIBRATION REPORTS .................................................................................................................................. 33 ANNEX B SAR SYSTEM PHOTOGRAPHS .......................................................................................................................... 52 ANNEX C SETUP PHOTOGRAPHS .................................................................................................................................... 53 Title: SAR Test Report of Tablet Computer Model : Creader professional229 To C95.1, IEEE 1528:2013, IEC62209-2:2010 & RSS-102 Issue 4 and Safety Code 6 Serial# 14070260-FCC-H Issue Date June 9th, 2014 Page 5 of 54 www.siemic.com This page has been left blank intentionally. Title: SAR Test Report of Tablet Computer Model : Creader professional229 To C95.1, IEEE 1528:2013, IEC62209-2:2010 & RSS-102 Issue 4 and Safety Code 6 Serial# 14070260-FCC-H Issue Date June 9th, 2014 Page 6 of 54 www.siemic.com 1 Executive Summary & EUT information The purpose of this test programmed was to demonstrate compliance of the Launch Tech Co., Ltd. Model: Greader professional229 against the current Stipulated Standards. The Tablet has demonstrated compliance with the C95.1, IEEE 1528:2013, and IEC62209-2:2010, RSS-102 Issue 4 and Safety Code 6. The test has demonstrated that this unit complies with stipulated standards. EUT Information EUT Description Automotive diagnosis computer Model No Greader professional229, CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 Input Power Li-ion Battery Charging Voltage:3.7V , 4000mAh Charge Cut-off Voltage: 4.2 V Maximum Conducted Output Power to Antenna WLAN: 10.42dBm Highest Reported SAR Level(s) 0.12 W/Kg 1g Body Tissue Classification Per Stipulated Test Standard Mobile Device Multi-SIM NA Co-located TX NA Antenna Separation distances NA Antenna Type(s) PIFA Antenna(WLAN) Accessory NA Equipment Class Highest Reported SAR …

Text truncated - open the document above for the full version.

Launch Tech Co., Ltd. Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 June 18, 2014 Report No.: 14070260-FCC-R1 (This report supersedes none) Modifications made to the product : None This Test Report is Issued Under the Authority of: Herith Shi Compliance Engineer Alex Liu Technical Manager This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 2 of 76 www.siemic.com www.siemic.com.cn Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . SIEMIC (Shenzhen - China) Laboratories Accreditations for Conformity Assessment Country/Region Scope USA EMC , RF/Wireless , Telecom Canada EMC, RF/Wireless , Telecom Taiwan EMC, RF, Telecom , Safety Hong Kong RF/Wireless ,Telecom Australia EMC, RF, Telecom , Safety Korea EMI, EMS, RF , Telecom, Safety Japan EMI, RF/Wireless, Telecom Singapore EMC , RF , Telecom Europe EMC, RF, Telecom , Safety Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 3 of 76 www.siemic.com www.siemic.com.cn This page has been left blank intentionally. Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 4 of 76 www.siemic.com www.siemic.com.cn CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION .......................................................................................... 5 2 TECHNICAL DETAILS ......................................................................................................................................... 6 3 MODIFICATION ..................................................................................................................................................... 7 4 TEST SUMMARY .................................................................................................................................................... 8 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................. 9 ANNEX A. TEST INSTRUMENT & METHOD ........................................................................................................ 55 ANNEX B. EUT AND TEST SETUP PHOTOGRAPHS ........................................................................................... 60 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT ................................................................................ 71 ANNEX D. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PART LIST ............................................. 75 ANNEX E. DECLARATION OF SIMILARITY ........................................................................................................ 76 Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 5 of 76 www.siemic.com www.siemic.com.cn 1 EXECUTIVE SUMMARY & EUT INFORMATION The purpose of this test programme was to demonstrate compliance of the Launch Tech Co., Ltd., Automotive diagnosis computer and model: Creader professional229 against the current Stipulated Standards. The Automotive diagnosis computer has demonstrated compliance with the FCC Part 15.247: 2013, ANSI C63.4: 2009. EUT Information EUT Description : Automotive diagnosis computer Main Model : Creader professional229 Serial Model : CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 (The difference between Main Model and Serial Model are Label and Color) Antenna Gain : WIFI: 2.5 dBi Input Power : Adapter: Model: HKC0055010-3A Input: 100-240V; 50/60Hz Output: 5V; 1000mA Battery: Model: CRP229 Spec: 3.8V 3000mAh Limited charger voltage: 4.35V Classification Per Stipulated Test Standard : FCC Part 15.247: 2013, ANSI C63.4: 2009 Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 6 of 76 www.siemic.com www.siemic.com.cn 2 TECHNICAL DETAILS Purpose Compliance testing of Automotive diagnosis computer with stipulated standard Applicant / Client Launch Tech Co., Ltd. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China Manufacturer Launch Tech Co., Ltd. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China Laboratory performing the tests SIEMIC (Shenzhen - China) Laboratories Zone A, Floor 1, Building 2, Wan Ye Long Technology Park, South Side of Zhoushi Road, Bao'an District, Shenzhen, Guangdong, China Tel: +86-0755-2601 4629 / 2601 4953 Fax: +86-0755-2601 4953-810 Email: [email protected] Test rep…

Text truncated - open the document above for the full version.

Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 69 of 76 www.siemic.com www.siemic.com.cn Annex B.iii. Photograph 1: Test Setup Photo Conducted Emissions Test Setup Front View Conducted Emissions Test Setup Side View Title: RF Test Report for Automotive diagnosis computer Main Model: Creader professional229 Serial Model: CRP221, CRP223, CRP225, CRP226, CRP228, CRP229 To: FCC Part 15.247: 2013, ANSI C63.4: 2009 Report No.: 14070260-FCC-R1 Issue Date: June 18, 2014 Page: 70 of 76 www.siemic.com www.siemic.com.cn Radiated Spurious Emissions Test Setup Below 1GHz - Front View Radiated Spurious Emissions Test Setup Above 1GHz –Front View