XUJPADIIAutomotive Diagnosis Computer

Version: V1.00.000 Revised date: 05-06-2014 II LAUNCH X-431 PADII User's Manual Copyright Information Copyright © 2014 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this information as applied to other units. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. Trademark Information LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called LAUNCH for short) in China and other countries. All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact LAUNCH by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH. CO., LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual. Safety Precautions Before using X-431 PADII, please read the following safety information carefully. Never collide, throw, or punch X-431 PADII, and avoid falling, • extruding and blending it. Do not use X-431 PADII in exceptionally cold or hot, dusty, damp or • dry environments. In places where X-431 PADII is forbidden or using X-431 PADII may • cause interference or generate a potential risk, please turn it off. To ensure a safe driving, please do not use X-431 PADII while • driving. Turn off X-431 PADII before boarding any airplane. • Do not dismantle X-431 PADII by yourself. If there is any inquiry, • please contact the dealer. Never place X-431 PADII into apparatus with strong electromagnetic • field. Keep X-431 PADII far away from magnetic devices because its • radiations may erase the data stored on X-431 PADII. Store X-431 PADII out of reach of children and do not allow children • to use it unsupervised. Please use the included battery and charger. Otherwise, explosion • may happen. Do not disconnect power abruptly when X-431 PADII is being • LAUNCH X-431 PADII User's Manual III formatted or in process of uploading or downloading. Or else it may result in program error. Precautions on Using X-431 PADII The ignition switch should be OFF while plugging or unplugging the • diagnostic connector. When the diagnostic connector is not used, remember to place • it into the diagnostic connector housing located on the docking station to avoid loss. If your vehicle keeps unattended for a week or a long period, it • is suggested to unplug the connector from vehicle’s DLC to save battery power. While diagnosing a vehicle, you are not advised to use phone • or messaging, because it may cause a data communication interruption. If it happens, it is abnormal and just try to re-do it. Precautions on Operating Vehicle’s ECU Do not disconnect the vehicle inner consumer when the ignition • switch is ON. High voltage transients may encounter at the moment of disconnecting, which may damage the sensors and the ECU. Protect the computer from magnetic object.• Do cut off the power supply of ECU system before welding on the • vehicle. Pay more attention to the ECU and the sensors when the operation • is next to them. Ground yourself when you disassemble PROM, otherwise ECU • and sensors will be damaged by static electricity. Do connect ECU harness connector firmly, otherwise electronic • elements, such as IC inside ECU, will be damaged. Table of Contents 1 Introduction ....................................................................................1 1.1 Product Profile ..............................................................................1 1.2 Features .......................................................................................1 1.3 Technical Specifications ...............................................................1 2 Knowledge of X-431 PADII ............................................................2 2.1 X-431 PADII Tablet .......................................................................3 2.2 X-431 PADII Docking Station ........................................................4 2.3 Diagnostic Connector ...................................................................5 2.4 X-431 PADII Accessory Checklist .................................................5 3 Preparations...................................................................................7 3.1 Charging X-431 PADII ................................................................…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 4.0 LAUNCH TECH CO., LTD. 2014-07-04 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _ LAUNCH TECH CO., LTD._ hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: XUJPADII Automotive Diagnosis Computer; Model Number: X-431 PADII Sincerely, signature YIBING.XUE / Manager E-mail: [email protected] Phone: (86) 755-84528031 Fax: (86) 755-84528889 Address Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China. SCS-F18: Project and Product Certification Representative Authorization Letter Page 3 of 3 Rev 4.0 LAUNCH TECH CO., LTD. 2014-07-04 To: SIEMIC, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, LAUNCH TECH CO., LTD._ hereby authorize SIEMIC, Inc. to act as Certification Body for certifying for the following project(s): FCC ID: XUJPADII Automotive Diagnosis Computer; Model Number: X-431 PADII We affirm that between SIEMIC, Inc. and _ LAUNCH TECH CO., LTD. any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, signature YIBING.XUE / Manager E-mail: [email protected] Phone: (86) 755-84528031 Fax: (86) 755-84528889 Address Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 LAUNCH TECH CO., LTD. 2014-07-04 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: XUJPADII We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature YIBING.XUE / Manager E-mail: [email protected] Phone: (86) 755-84528031 Fax: (86) 755-84528889 Address Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China.

Label Location Proposed Label Location on EUT

WIFI& BT module antenna

TRF No.: FCC 15.247/A Page 1 of 51 Report No.: ES140319175E1 Ver.1.0 Shenzhen EMTEK Co.,Ltd. Building 69, Majialong Industry Zone, Nanshan District, Shenzhen,Guangdong,China www.emtek.com.cn Tel: +86-755-2695 4280 Fax: +86-755-2695 4282 Access to the World ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPARTC REQUIREMENT OF Automotive Diagnosis Computer MODEL No.: X-431 PADII FCC ID: XUJPADII Trademark: LAUNCH REPORT NO.: ES140319175E1 ISSUE DATE: July 4, 2014 Prepared for LAUNCH TECH CO., LTD. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China. Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No.: FCC 15.247/A Page 2 of 51 Report No.: ES140319175E1 Ver.1.0 Shenzhen EMTEK Co.,Ltd. Building 69, Majialong Industry Zone, Nanshan District, Shenzhen,Guangdong,China www.emtek.com.cn Tel: +86-755-2695 4280 Fax: +86-755-2695 4282 Access to the World VERIFICATION OF COMPLIANCE Applicant: LAUNCH TECH CO., LTD. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China. Manufacturer: LAUNCH TECH CO., LTD. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China. Product Description: Automotive Diagnosis Computer Model Number: X-431 PADII File Number: ES140319175E1 Date of Test: March 19, 2014 to July 4, 2014 We hereby certify that: The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Date of Test : March 19, 2014 to July 4, 2014 Prepared by : Jack Li/Editor Reviewer : June xie/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF No.: FCC 15.247/A Page 3 of 51 Report No.: ES140319175E1 Ver.1.0 Shenzhen EMTEK Co.,Ltd. Building 69, Majialong Industry Zone, Nanshan District, Shenzhen,Guangdong,China www.emtek.com.cn Tel: +86-755-2695 4280 Fax: +86-755-2695 4282 Access to the World Table of Contents 1 GENERAL INFORMATION ................................................................................................. 5 1.1 PRODUCT DESCRIPTION............................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ............................................................................................ 5 1.3 TEST METHODOLOGY .................................................................................................................. 5 1.4 SPECIAL ACCESSORIES ................................................................................................................ 5 1.5 EQUIPMENT MODIFICATIONS ........................................................................................................ 5 1.6 TEST FACILITY ............................................................................................................................. 6 2. SYSTEM TEST CONFIGURATION .................................................................................... 7 2.1 EUT CONFIGURATION .................................................................................................................. 7 2.2 EUT EXERCISE ............................................................................................................................ 7 2.3 TEST PROCEDURE ....................................................................................................................... 7 2.4 LIMITATION .................................................................................................................................. 7 2.5 CONFIGURATION OF TESTED SYSTEM ........................................................................................ 11 2.6 DESCRIPTION OF TEST MODES .................................................................................................... 12 3. SUMMARY OF TEST RESULTS ...................................................................................... 13 4. CONDUCTED EMISSIONS TEST .................................................................................... 14 4.1 MEASUREMENT PROCEDURE: .................................................................................................... 14 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ............................................................... 14 4.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 14 4.4 CONDUCTED EMISSION LIMIT .................................................................................................... 14 4.5 MEASUREMENT RESULT: ............................................................................................................ 15 5. RADIATED EMISSION TEST ........................................................................................... 16 5.1 MEASUREMENT PROCEDURE ..................................................................................................... 16 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ............................................................... 16 5.3 MEASUREMENT EQUIPMENT USED: ............................................................................................ 17 5.4 MEASUREMENT RESULT ............................................................................................................. 18 6. CHANNEL SEPARATION TEST ...................................................................................... 24 6.1 MEASUREMENT PROCEDURE ..........................................................…

Text truncated - open the document above for the full version.

PHOTOGRPHS OF TEST SETUP Radiated emission Conducted Emission