XUJT10HDVCIWireless Scan Module ICON HD Truck Scanner

1 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. IMPORTANT SAFETY INFORMATION Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. Work Area Safety 1. Keep work area clean and well lit. Cluttered benches and dark areas may cause accidents. 2. Do not connect or disconnect the Scanner while the ignition is on or the engine is running. 3. DO NOT attempt to operate the Scanner while driving the vehicle. Have a passenger operate the Scanner. 4. Before testing a vehicle, put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission).Engage the parking brake and chock the tires. 5. NEVER smoke or allow a spark or flame in vicinity of battery or engine. 6. Operating a vehicle indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell. NEVER operate vehicle inside a home or garage, EVEN IF doors and windows are open. Only use OUTSIDE and far away from windows, doors, and vents. 7. Do not operate the Scanner in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust. 8. Never leave the vehicle unattended while running tests. 9. Keep a fire extinguisher suitable for gasoline/ chemical/electrical fires nearby. 10. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running. 11. Keep bystanders, children and visitors away while operating the Scanner. 12. This product is not a toy. Do not allow children to play with or near this item. 13. Use as intended only. Do not modify. 14. Inspect before every use; do not use if parts are loose or damaged. 2 15. Do not place the Scanner on any unstable surface. 16. Handle the Scanner with care. If the Scanner is dropped, check for breakage and any other conditions that may affect its operation. 17. Keep the Scanner dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the Scanner when necessary. 18. Store the Scanner and accessories in a locked area out of the reach of children. 19. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. IMPORTANT SAFETY INFORMATION Electrical Safety 1. Do not use the Scanner while standing in water. 2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. 3. Do not expose the Scanner Tablet or Power Adapter to rain or wet conditions. Water entering the Scanner or Power Adapter increases the risk of electric shock. Personal Safety 1. Wear ANSI-approved safety goggles during use. 2. Do not wear loose clothing or jewelry. Keep hair, clothing, hands, tools, and test equipment away from moving or hot engine parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Do not use the Scanner while tired or under the influence of drugs, alcohol, or medications. A moment of interruption can result in serious personal injury. 4. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. 5. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Service There are no user serviceable parts. Have the Scanner serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. SAVE THESE INSTRUCTIONS. 3 Specifications Scanner Tablet Operating System Android Processor 4-core 2.0GHz Display 10.1 inch capacitive touch screen Memory 4GB Storage 128GB Camera Front-facing 5.0MP + Rear-facing 8.0MP camera Connectivity Wi-Fi: 802.11 b/g/n/ac 2.4G/5G dual frequency Operating Temperature 32°F-113°F Storage Temperature -4°F-158°F WSM (Wireless Scan Module) Working Voltage 9-18 VDC Working Current ≤150 mA Standby Current 95 mA Working Temperature 14°F-122°F Storage Temperature -4°F-140°F Operating Humidity <60% Storage Humidity <80% WSM (Wireless Scan Module) Product Name: Wireless Scan Module ICON HD Truck Scanner Product Model: 73243 4 Overview OBD II On-Board Diagnostics It is required by the EPA that all 1996 and newer vehicles sold in the United States be equipped with an OBD II computer system. OBD II is an early warning system designed to monitor engine, transmission, and emissions control components by performing specific diagnostic tests. When a fault condition is detected, the system captures important data and activates the “Check Engine” light. If the light comes on, the vehicle might have a condition that wastes fuel, shortens engine life, or causes excessive air pollution. If the problem that caused the light to come on is addressed, for instance a loose gas cap is tightened, the light will go out. If the light comes on and stays on, a minor engine fault condition is occurring and should be addressed as soon as possible If the light is blinking, a severe engine fault condition is occurring and should be addres…

Text truncated - open the document above for the full version.

Launch Tech Co., Ltd. Covered Equipment Certification Attestation Letter 11/11/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: XUJT10HDVCI Launch Tech Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Launch Tech Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Launch Tech Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Ivy Zhong Title: FCC CONTACT Company Name: Launch Tech Co., Ltd. Date: 11/11/2025

Launch Tech Co., Ltd. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 11/11/2025 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: XUJT10HDVCI FRN of applicant: 0019193101 Per section 2.911(d)(7) of the FCC rules, Launch Tech Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Launch Tech (USA) Inc. FCC Registration Number (FRN): 0027512607 Physical U.S. Company Address: 4701 E Airport Dr ontario, CA 91761, United States Contact Person: Shichun Tao Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: Ivy Zhong Title: FCC CONTACT Company Name: Launch Tech Co., Ltd. Date: 11/11/2025 Agent Signed (if different from Applicant): Signed: Printed name: Shichun Tao Title: Manager Company Name: Launch Tech (USA) Inc. Date: 11/11/2025

DATE: 2025.11.11 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint CTC Laboratories, Inc., Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Launch Tech Co., Ltd., No.4012, Launch Industrial Park, North Wuhe Rd, Bantian Street, Longgang District, Shenzhen, 518129, China (Applicant Name and address) Name: Ivy Zhong Title: FCC CONTACT Applicant Company: Launch Tech Co., Ltd.

DATE: 2025.11.11 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: __XUJT10HDVCI__ Product Name: __Wireless Scan Module ICON HD Truck Scanner__ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Name: Ivy Zhong Title: FCC CONTACT Company: Launch Tech Co., Ltd.

Date: 2025.11.11 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Name: Ivy Zhong Title: FCC CONTACT Company: Launch Tech Co., Ltd.

CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel: +86-755-27521059 Fax: +86-755-27521011 http://www.sz-ctc.org.cn Page 1 of 4 External Photographs Page 2 of 4 Page 3 of 4 Page 4 of 4

1.00.000 郑中庆 2025.09.09 HFT T10 HD HFT T10 HD定制Smartbox3.0标贴(英文),RoHS-L401 107025508 40.0 162.0 3-R3.8 c3 33.20 7 . 2 0 6 0 . 7 1 36.60 紫色部分透明 背胶镂空尺寸大于透明 Smartbox3.0标贴 Wireless Scan Module ICON HD Truck Scanner Part of 73243 9-36VDC / ≤0.5A FCC ID: XUJT10HDVCI Wireless Scan Module ICON HD Truck Scanner Part of 72343 9-36VDC / ≤0.5A FCC ID: XUJT10HDVCI 郑中庆 2025.10.15 按要求参考 Label Location 1.

CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel: +86-755-27521059 Fax: +86-755-27521011 http://www.sz-ctc.org.cn Page 1 of 8 Internal Photographs Page 2 of 8 BT Antenna Page 3 of 8 Page 4 of 8 Page 5 of 8 Page 6 of 8 Page 7 of 8 Page 8 of 8

Page 1 of 2 Report No.: CTC2025637103 CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn TRF No：CTC-TR-066_A2 For anti-fake verification, please visit the official website of China Inspection And Testing Society : yz.cncaq.com Maximum Permissible Exposure Evaluation FCC ID: XUJT10HDVCI According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b). EUT Specification Product Name: Wireless Scan Module ICON HD Truck Scanner Trade Mark: Model/Type Reference: 73243 Listed Model(s): / Model Differences: / Frequency Band (Operating) BT: 2402MHz ~ 2480MHz Device Category Portable (<5mm separation) Mobile (>20cm separation) Fixed (>20cm separation) Others ___ Exposure Classification Occupational/Controlled exposure (S=5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna Diversity Single antenna Multiple antennas TX diversity RX diversity TX/RX diversity Antenna Gain (Max) 3.27dBi Evaluation Applied MPE Evaluation SAR Evaluation Page 2 of 2 Report No.: CTC2025637103 CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn TRF No：CTC-TR-066_A2 For anti-fake verification, please visit the official website of China Inspection And Testing Society : yz.cncaq.com Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) (A) Limits for Occupational/Controlled Exposure 300-1500 -- -- F/300 <6 1500-100000 -- -- 5 <6 (B) Limits for General Population/Uncontrolled Exposure 300-1500 -- -- F/1500 <30 1500-100000 -- -- 1 <30 Calculation Method Friis transmission formula: Pd=(P out *G)/(4*Pi*R 2 ) Where: Pd= Power density in mW/cm 2 P out = output power to antenna in mW G= gain of antenna in linear scale Pi= 3.1416 R= distance between observation point and center of the radiator in cm Pd limit of MPE is 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result Mode Frequency (MHz) Antenna Gain (dBi) Maximum Power (dBm) Tune Up Tolerance (dB) Max. Tune Up Power (dBm) Power Density at 20cm (mW/cm 2 ) Limit (mW/cm 2 ) BLE 2402 3.27 2.32 ±1 3.50 0.0009 1 EDR 2402 3.27 4.01 ±1 5.00 0.0013 1 Note: 1. Calculate in the worst-case mode. 2. Max. Tune Up Power is declared by manufacturer, and used to calculate. 3. For a more detailed features description, please refer to the RF Test Report. **********************THE END**********************

CTC Laboratories, Inc. $CNAS$ CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn TRF No：CTC-TR-058_A2 For anti-fake verification, please visit the official website of China Inspection And Testing Society : yz.cncaq.com TEST REPORT Report No. .................................... : CTC2025637101 FCC ID ........................................... : XUJT10HDVCI Applicant ...................................... : Launch Tech Co., Ltd. Address .......................................... : No.4012, Launch Industrial Park, North Wuhe Rd, Bantian Street, Longgang District, Shenzhen, 518129, China Manufacturer..................................: Launch Tech Co., Ltd. Address..........................................: No.4012, Launch Industrial Park, North Wuhe Rd, Bantian Street, Longgang District, Shenzhen, 518129, China Product Name .............................. : Wireless Scan Module ICON HD Truck Scanner Trade Mark .................................... : Model/Type reference .................... : 73243 Listed Model(s) .............................. : / Standard ....................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Test Report Form No ..................... : CTC-TR-058_A2 Master TRF .................................... : Dated 2025-05-12 Date of receipt of test sample........: Oct. 13, 2025 Date of testing..............................: Oct. 13, 2025 ~ Nov. 10, 2025 Date of issue................................: Dec. 1, 2025 Result............................................: PASS Compiled by: (Printed name+signature) Jim Jiang Supervised by: (Printed name+signature) Eric Zhang Approved by: (Printed name+signature) Totti Zhao $英文检测章$ $Totti$ This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CTC. The Test Result in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CTC within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Page 2 of 57 Report No.: CTC2025637101 CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn TRF No：CTC-TR-058_A2 For anti-fake verification, please visit the official website of China Inspection And Testing Society : yz.cncaq.com Table of Contents Page 1. TEST SUMMARY ....................................................................................................................................................... 3 1.1. TEST STANDARDS .......................................................................................................................................................... 3 1.2. REPORT VERSION ......................................................................................................................................................... 3 1.3. TEST DESCRIPTION ........................................................................................................................................................ 4 1.4. TEST FACILITY .............................................................................................................................................................. 5 1.5. MEASUREMENT UNCERTAINTY ........................................................................................................................................ 6 1.6. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2. GENERAL INFORMATION .......................................................................................................................................... 7 2.1. CLIENT INFORMATION ................................................................................................................................................... 7 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 7 2.3. ACCESSORY EQUIPMENT INFORMATION ............................................................................................................................ 8 2.4. OPERATION STATE ........................................................................................................................................................ 9 2.5. MEASUREMENT INSTRUMENTS LIST ............................................................................................................................... 10 3. TEST ITEM AND RESULTS ........................................................................................................................................ 12 3.1. CONDUCTED EMISSION................................................................................................................................................ 12 3.2. RADIATED EMISSION ................................................................................................................................................... 15 3.3. BAND EDGE EMISSIONS (RADIATED) .............................................................................................................................. 26 3.4. BAND EDGE AND SPURIOUS EMISSIONS (CONDUCTED) ........................................................................................…

Text truncated - open the document above for the full version.

Antenna Specification 1. Antenna Describe Antenna Manufacturer ShenZhen Tongxun Precision Technology Co., Ltd Address No.52, Xikeng Road, Xikeng community, Fucheng Street, Longhua District, 518110 Shenzhen city, Guangdong Province, China Antenna Model KC.IA.00249 Antenna Type FPC Antenna Antenna Gain 2.4G: 3.27dBi Max Frequency Rang 2400-2500MHz VSWR ≤2 Input Impedance 50Ω 2. External View Drawing Unit: mm 3. Measurement Result 3.1 Test Setup 3.2 S11 Parameter 3.3 Antenna test data 3.4 Antenna test diagram

CTC Laboratories, Inc. Room 107, 108, 207, 208, 303 of Building A, Room 101 of Building B, No.7, Lanqing 1st Road, Luhu Community, Guanhu Subdistrict, Longhua District, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 http://www.sz-ctc.org.cn Page 1 of 2 Radiated Measurements 30MHz-1GHz Above1GHz Page 2 of 2 Conducted Emissions