XUJX431PROAutomotive Diagnosis Computer

Version: V1.00.000 Revised date: 2013-05-17 LAUNCH X-431 PRO User’s Manual — Safety Precautions Copyright Information Copyright © 2013 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this information as applied to other units. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. Trademark Information LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called LAUNCH for short) in China and other countries. All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact LAUNCH by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH. CO., LTD.，Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual. i LAUNCH X-431 PRO User’s Manual — Safety Precautions Safety Precautions Before using X-431 PRO, please read the following safety information carefully. Œ Never collide, throw, or punch X-431 PRO, and avoid falling, extruding and blending it. Œ Do not use X-431 PRO in exceptionally cold or hot, dusty, damp or dry environments. Œ In places where X-431 PRO is forbidden or using X-431 PRO may cause interference or generate a potential risk, please turn off it. Œ To ensure a safe driving, please do not use X-431 PRO while driving. Œ Turn off X-431 PRO before boarding any airplane. Œ Do not dismantle X-431 PRO by yourself. If there is any inquiry, please contact the dealer. Œ Never place X-431 PRO into apparatus with strong electromagnetic field. Œ Keep X-431 PRO far away from magnetic devices because its radiations may erase the data stored on the devices. Œ Store X-431 PRO out of reach of children and do not allow children to use it unsupervised. Œ Please use the included battery and charger. Otherwise, explosion may happen. Œ Do not disconnect power abruptly when X-431 PRO is being formatted or in process of uploading or downloading. Or else it may result in program error. Precautions on Using X-431 PRO z The ignition switch should be OFF while plugging or unplugging the DBScar diagnostic connector. z When DBScar connector is not used, remember to place it into the diagnostic connector housing located at the back of the protection sleeve to avoid loss. z If your vehicle keeps unattended for a week or a long period, it is suggested to unplug the connector from vehicle’s DLC to save battery power. z While diagnosing a vehicle, you are not advised to use phone or ii LAUNCH X-431 PRO User’s Manual — Safety Precautions messaging, because it may cause a data communication interruption. If it happens, it is abnormal and just try to re-do it. Precautions on Operating Vehicle’s ECU z Do not disconnect the vehicle inner consumer when the ignition switch is on. High voltage transients may encounter at the moment of disconnecting, which may damage the sensors and the ECU. z Protect the computer from magnetic object. z Do cut off the power supply of ECU system before welding on the vehicle. z Pay more attention to the ECU and the sensors when the operation is next to them. z Ground yourself when you disassemble PROM, otherwise ECU and sensors will be damaged by static electricity. z Do connect ECU harness connector firmly, otherwise electronic elements, such as IC inside ECU, will be damaged. iii LAUNCH X-431 PRO User’s Manual — Table of Contents Table of Contents 1 INTRODUCTIONS............................................................................................ 1 1.1 P RODUCT P ROFILE ................................................................................... 1 1.2 F EATURES ................................................................................................ 1 1.3 K NOWLEDGE OF X-431 PRO.................................................................... 2 1.3.1 X-431 PRO Whole Set....................................................................... 2 1.3.2 X-431 PRO pad computer................................................................. 3 1.3.3 X-431 PRO protection sleeve............................................................ 4 1.3.4 DBScar diagnostic connector............................................................ 5 1.4 T ECHNICAL P ARAMETERS ....................................................................…

Text truncated - open the document above for the full version.

To：SIEMIC , 775 Montague Expressway. Milpitas, CA 95035, USA Declaration Letter We declare that 2G/3G radio hardware is attached in the EUT , but the function is not supported and it disable by software.The EUT can't be disassembled,if done, it can not be use ， the products and testing samples do not have a dial keyboard so it is unable to realize 2G/3G fun ction。 Sincerely, Client’s signature : Client’s name / title : Xue Yibing /Manager Contact information / address: Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Launch Tech Co., Ltd. 2013-8-21 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Launch Tech Co., Ltd.here by authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description： Automotive Diagnosis Computer model name：X-431 PRO FCC ID: XUJX431PRO We affirm that between SIEMIC and Launch Tech Co., Ltd., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title : Xue Yibing /Manager Contact information / address : Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Launch Tech Co., Lt . 2013-8-21 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: XUJX431PRO We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description - BOM The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Xue Yibing /Manager Contact information / address: Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China

Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 19 of 37 www.siemic.com.cn Annex B. EUT AND TEST SETUP PHOTOGRAPHS Annex B.i. Photograph 1: EUT External Photo Whole Package - Top View 1 Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 20 of 37 www.siemic.com.cn EUT - Front View EUT - Rear View Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 21 of 37 www.siemic.com.cn EUT - Top View EUT - Bottom View Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 22 of 37 www.siemic.com.cn EUT - Left View EUT - Right View Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 23 of 37 www.siemic.com.cn Whole Package - Top View 2 Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 24 of 37 www.siemic.com.cn EUT in the Plastic Shell - Front View EUT in the Plastic Shell - Rear View Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 25 of 37 www.siemic.com.cn Plastic Shell - Front View Plastic Shell - Rear View

Label Location

Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 26 of 37 www.siemic.com.cn Annex B.ii. Photograph 2: EUT Internal Photo Cover Off - Top View Adapter-front view Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 27 of 37 www.siemic.com.cn Battery - Bottom View Mainborad - Top View Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 28 of 37 www.siemic.com.cn Mainborad Uncover - Top View Mainborad - Bottom View Title: EMC Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A To: FCC Part 15 Subpart B Class B: 2012 , ANSI C63.4:2009 Report No.: 13070233-FCC-E Issue Date: August 21, 2013 Page: 29 of 37 www.siemic.com.cn Bluetooth / WIFI Antenna View

Launch Tech Co., Ltd. Automotive Diagnosis Computer Main Model: X-431 PRO Serial Model: N/A August 21, 2013 Report No.: 13070333-FCC-R1 (This report supersedes NONE) Modifications made to the product : None This Test Report is Issued Under the Authority of: Herith Shi Compliance Engineer Alex Liu Technical Manager This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 2 of 83 www.siemic.com.cn Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety Japan VCCI, JATE, TELEC, RFTEMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety Accreditations for Product Certifications Country/Region Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Japan MIC, (RCB 208) RF , Telecom Hong Kong OFTA (US002) RF , Telecom Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 3 of 83 www.siemic.com.cn This page has been left blank intentionally. Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 4 of 83 www.siemic.com.cn CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION .......................................................................................... 5 2 TECHNICAL DETAILS ......................................................................................................................................... 6 3 MODIFICATION ..................................................................................................................................................... 7 4 TEST SUMMARY .................................................................................................................................................... 8 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................. 9 ANNEX A. TEST INSTRUMENT & METHOD ........................................................................................................ 59 ANNEX B. EUT AND TEST SETUP PHOTOGRAPHS ........................................................................................... 65 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT ................................................................................ 78 ANNEX D. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PART LIST ............................................ 82 ANNEX E. DECLARATION OF SIMILARITY ........................................................................................................ 83 Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 5 of 83 www.siemic.com.cn 1 EXECUTIVE SUMMARY & EUT INFORMATION The purpose of this test programme was to demonstrate compliance of the Launch Tech Co., Ltd. , Automotive Diagnosis Computer and model: X-431 PRO against the current Stipulated Standards. The Automotive Diagnosis Computer has demonstrated compliance with the FCC 15.247: 2012, ANSI C63.4: 2009. EUT Information EUT Description : Automotive Diagnosis Computer Main Model : X-431 PRO Serial Model : N/A Antenna Gain : Bluetooth: -1.2Bi WIFI: -1.2 dBi Input Power : Battery: Model: N/A Spec: 3.7V 3000mAh Limited charger voltage:5V Adapter: Model:HKc0055010-2A Input: AC 100-240V 50/60Hz 0.15A Output: DC 5V 1Ah Classification Per Stipulated Test Standard : FCC 15.247: 2012, ANSI C63.4: 2009 Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 6 of 83 www.siemic.com.cn 2 TECHNICAL DETAILS Purpose Compliance testing of Automotive Diagnosis Computer with stipulated standard Applicant / Client Launch Tech Co., Ltd. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China Manufacturer Launch Tech Co., Ltd. Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, China Laboratory performing the tests SIEMIC Shenzhen (China) Laboratories Zone A, Floor 1, Building 2, Wan Ye Long Technology Park, South Side of Z houshi Road, Bao'an District, Shenzhen, Guangdong, China Tel: +86-0755-2601 4629 / 2601 4953 Fax: +86-0755-2601 4953-810 Email: [email protected] Test report reference number 13070333-FCC-R1 Date EUT received August 10 2013 Standard applied FCC 15.247: 2012, ANSI C63.4: 2009 Dates of test (from – to) August 10,…

Text truncated - open the document above for the full version.

Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 76 of 83 www.siemic.com.cn Annex B.iii. Photograph 3: Test Setup Photo Conducted Emissions Test Setup Front View Conducted Emissions Test Setup Side View Title: RF Test Report for Automotive Diagnosis Computer Main Model: X-431 PRO Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4: 2009 Report No: 13070333-FCC-R1 Issue Date: August 21, 2013 Page: 77 of 83 www.siemic.com.cn Radiated Spurious Emissions Test Setup Below 1GHz - Front View Radiated Spurious Emissions Test Setup Above 1GHz –Front View