XVP13414083690Remote Control Car Series

EN - English R/CCARSUSER MANUAL WARNING! - Not suitable for children under 36 months. Small parts. Choking Hazard. Remove all packaging before giving this toy to a child. Please read and retain this information for future reference. CAUTION! Only for domestic use. To be used under the direct supervision of an adult. Made in China FOR ITEM NO.: 29324M FREQUENCY: 2.4GHz CONTROL DISTANCE: 20M+ SPEED: 10KM/HOUR NOTE: • For best results use new, high quality, fully chargedbatteries. • Parental guidance is recommended when installing or replacingbatteries • Users should keep and retain this information for futurereference • The colour and design of this product may vary from theimages BATTERY REQUIREMENTS: 1. 3 X 1.5V "AA"/LR6 battery forVehicle 2. 2 X 1.5V "AA"/LR6 forTransmitter FEATURES: • Package contains: Vehicle, Transmitter and Instructionmanual. • Full Function RadioControl • Forward/ReverseDriving • Ifthecardoesnotdriveinstraightlineadjusttheregulatingrodunderthefrontofthecartofine-tunethe direction. DRIVING TIPS • Point the antenna upward, do not point it down towards the vehicle. • Do not touch or hold the antenna oftransmitter • Operate vehicle on flat, smooth firm and drysurfaces • Donotdriveyourvehicleonsandorthroughwaterorsnow • Do not operate near concrete walls which may disturb radio signal transmission. • Do not operate on publicroads BATTERY INSTALLATION: For transmitter and car: 1. Make sure the power switch is on OFFposition 2. Openthebatterycoveratthebottomofthetransmitter/vehiclebylooseningthescrewwithapositive/Phillips screwdriver 3. Install the AA BATTERY with the correct polarity (+/-) as shown inside thebatterycompartment. 4. Close the battery compartment cover and fasten thescrew. CAUTIONS: 1. Non - rechargeable batteries are not to berecharged 2. Rechargeablebatteriesaretoberemovedfromtoybeforebeingcharged 3. Rechargeable batteries are only to be charged by anadult 4. Differenttypesofbatteriesornewandusedbatteriesarenottobemixed 5. OnlybatteriesofsameorEquivalenttypeasrecommendedaretobeused 6. Batteries are to be inserted with correctpolarity 7. Exhausted batteries are to be removed fromtoy 8. The supply terminals are not to beshort-circuited 9. Do not mix Old and Newbatteries 10. Donotmixalkalineandstandard(carbon-zinc)orrechargeable(nickel-cadmium)batteries PRE-CAUTION AND CARE: 1. Do not crash the RC vehicle into hardobjects 2. OperatingRangeofthetransmittercanbeaffectedbyvariousfactors: • Weak batteries in the vehicle and / ortransmitter. • To get the best range from transmitter, operate the vehicleoutdoors 3. SwitchOffthepowerandremoveallbatteriesfrombothtransmitterandvehiclewhennotinuse. 4. Keep fingers, hair and loose clothing away from thewheels 5. Wipe body with softcloth 6. Do not use chemicals or water toclean 7. Brush areas where dirt getstrapped. Disposal Information: The wheelie bin symbol indicates that the product and batteries must not be disposed of as domestic waste. They may contain substances which can be damaging to the environment and health. Please use designated collection points or recycling facilities when disposing of the item or batteries JIAN FENG YUAN TOYS FACTORY CHENGHAI DISTRICT, SHANTOU CITY GUANDONG PROVINCE CHINA changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Date: 2021-4-13 JianFengYuan Toys Co., Ltd TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: XVP13414083690 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with JianFengYuan Toys Co., Ltd This authorization is valid until further written notice from the applicant. Print Name: CHUANG HONG WANG Title: General Manager Signature: On behalf of Company: JianFengYuan Toys Co., Ltd Telephone: 86 0754-85163819 E-mail: [email protected]

JianFengYuan Toys Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: JianFengYuan Toys Co., Ltd Regarding: Confidentiality Request regarding application for FCC ID: XVP13414083690 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: CHUANG HONG WANG Title: General Manager Signature: On behalf of Company: JianFengYuan Toys Co., Ltd Telephone: 86 0754-85163819 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name JianFengYuan Toys Co., Ltd Address LIANNAN ROAD LIANXIA TOWN CHENHAI DISTRICT SHANTOU CITY GUANGDONG POVINCE China Grantee Code XVP FCC ID XVP13414083690 Authorized Contact Name CHUANG HONG WANG Contact Email [email protected] Contact Phone 86 0754-85163819 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2021-4-13 Print Name: CHUANG HONG WANG Title: JIAN FENG YUAN TOYS CO.,LTD *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZCR2104020423AT FCC ID: XVP13414083690 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Internal Photos for SZCR2104020423AT FCC ID: XVP13414083690 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402042302 Page: 1 of 41 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2104020423AT Applicant: JianFengYuan Toys Co., Ltd Address of Applicant: LIANNAN ROAD LIANXIA TOWN CHENHAI DISTRICT SHANTOU CITY GUANGDONG POVINCE China Manufacturer: JIAN FENG YUAN TOYS CO., LTD Address of Manufacturer: LIANNAN RD., LIANXIA TOWN, CHENGHAI AREA, SHANTOU CITY, GUANGDONG PROVINCE, CHINA Equipment Under Test (EUT): EUT Name: Remote Control Car Series Model No.: 28624M, 28724M, 28824M, 29124M, 29224M, 29324M, 29524M, 29624M, 29724M, 29824M, 29924M, 26818BM, 26819BM, 29218, 23211, 23212, 28810, 28610, 28618M, 28718M, 28818M, 29118M, 29218M, 29318M, 6124M, 6224M, 6324M, 6524M, 6624M, 6724M, 6824M, 25211M, 26618B, 26617B, 2332, 2334, 2341, 29512, 29612, 29712, 29812, 29912, 29512M, 29612M, 29712M, 29812M, 29912M, 29516, 29616, 29716, 29816, 29916, 29516M, 29616M, 29716M, 29816M, 29916M, 28614, 28714, 28814, 29114, 29214, 29314, 28614M, 28714M, 28814M, 29114M, 29214M, 29314M, 6116M, 6216M, 6316M, 6516M, 6616M, 6716M, 6816M ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: XVP13414083690 Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2021-04-08 Date of Test: 2021-04-17 to 2021-04-26 Date of Issue: 2021-04-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402042302 Page: 2 of 41 Revision Record Version Chapter Date Modifier Remark 01 2021-04-28 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402042302 Page: 3 of 41 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Declaration of EUT Family Grouping: Model No.: 28624M, 28724M, 28824M, 29124M, 29224M, 29324M, 29524M, 29624M, 29724M, 29824M, 29924M, 26818BM, 26819BM, 29218, 23211, 23212, 28810, 28610, 28618M, 28718M, 28818M, 29118M, 29218M, 29318M, 6124M, 6224M, 6324M, 6524M, 6624M, 6724M, 6824M, 25211M, 26618B, 26617B, 2332, 2334, 2341, 29512, 29612, 29712, 29812, 29912, 29512M, 29612M, 29712M, 29812M, 29912M, 29516, 29616, 29716, 29816, 29916, 29516M, 29616M, 29716M, 29816M, 29916M, 28614, 28714, 28814, 29114, 29214, 29314, 28614M, 28714M, 28814M, 29114M, 29214M, 29314M, 6116M, 6216M, 6316M, 6516M, 6616M, 6716M, 6816M Only the model 29324M was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on colour, appearance and packaging. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402042302 Page: 4 of 41 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 DETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.4 TEST LOCATION ............................................................................................................................. 7 4.5 TEST FACILITY ............................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................10 6.1 ANTENNA REQUIREMENT ................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................11…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Setup Photos for SZCR2104020423AT FCC ID: XVP13414083690 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 Photographs Field Strength of the Fundamental Signal (15.249(a)) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 Restricted Band Around Fundamental Frequency Radiated Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4 Radiated Emissions Above 1GHz