XX6SEM8010HDMR Mobile Radio

Quick Reference Guide DMR Mobile Radio DMR Mobile Radio DMR Mobile Radio For SBM8000 / SCM8000 / SEM8000 Quick Reference Guide 1 General This guide covers the basic operation of the DMR Mobile Radio. Please refer to the user guide for more detailed information on using this product. Disclaimer notice Sepura’s policy is to continually improve its products. The features and facilities described in this document were correct at publication, but are subject to change without notice. Contact Us Sepura plc. Radio House, St Andrew’s Road, Cambridge CB4 1GR United Kingdom Tel: +44 (0)1223 876000 Fax: +44 (0)1223 879000 SPR-DOC-03808/2 Original Instructions: ENGLISH © Sepura plc. 2015 All rights reserved. This document is intended for the use of Sepura plc’s customers and/or other parties only for the purposes of the agreement or arrangement under which this document is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Sepura plc. Contents Safety ............................................................................................... 2 Regulatory ...................................................................................... 4 Connectors, controls, buttons and keys ..................................... 7 Status indicators and icons .......................................................... 8 LED status indicators .......................................................... 9 Accessory information ................................................................ 10 Fist microphone ............................................................... 10 Basic operation ............................................................................. 10 Power On/Off................................................................... 10 Adjusting the volume ........................................................ 10 Selecting a Channel .......................................................... 10 Making a PTT call ............................................................. 10 Receiving a PTT call ......................................................... 11 Emergency alarm ............................................................. 11 Caring for your radio .................................................................. 12 2 DMR Mobile Radio SBM8000, SCM8000, SEM8000 Safety Read these safety instructions carefully. Attention! Sepura products are designed for use by mobile workforces, often working alone, and are intended for use in occupational and controlled conditions. It is the responsibility of the person operating the product to ensure that it is operated safely at all times, and that local laws and regulations governing the usage of Radio Frequency (RF) products are observed. Obey all signs and instructions relating to the usage to RF wireless devices. It is recommended that you obtain training on how to safely operate this product. Your personal safety could be affected if you do not understand how to operate this product correctly. This product must not be operated in environments that exceed those listed in the product technical datasheet and in the Regulatory section of the product user guide. Unauthorised modifications to the product could cause the product to become non-operational. Always use Sepura approved antenna, battery and accessories with this product. Exposure to RF energy Sepura designs and manufactures products to meet strict guidelines and international standards relating to Radio Frequency (RF) energy and the potential health risks associated with using such products. If you have any concerns about potential health risks associated with long term exposure to RF energy, you should obtain advice from your employer. RF energy interference with electronic equipment Some personal medical devices, such as hearing aids and pacemakers, can be affected by RF energy. Always consult your service provider or the manufacturer of the medical device before using RF wireless devices. Some electronic devices are sensitive to RF energy. POWER OFF your radio when operating within health care facilities or other areas that are sensitive to RF energy. Safely operating your radio Your radio is not intrinsically safe and has not been designed for use in hazardous environments such gas fumes, flammable chemicals, or blasting areas. Check the compliance ratings of this product before operating the radio in any hazardous environment. Always ensure that your radio is operating correctly before entering any environment that has a potential risk to personal safety. Safety when driving a vehicle Always obey local laws and regulations governing the operation of RF wireless devices when driving and whilst at locations. Do not operate your radio if it creates a distraction from driving safely and observing road conditions. Always POWER OFF your radio at refuelling stations and obey warning signs relating to the use of RF wireless devices in the vicinity of refuelling stations. Quick Reference Guide 3 Important safety notes about the Antenna NEVER touch the antenna when the radio is transmitting, this may cause a minor burn to the skin and may affect the operational range of the antenna. NEVER use your radio without an antenna attached. Transmitting without an antenna may damage the radio. Only use a Sepura approved antenna with your radio. The antenna should be installed and operated with a minimum distance of 1.2m to any person. This distance has been calculated based on a 2dB cable loss between radio and antenna. Accessories Sepura products have been tested to meet strict guidelines for personal safety and operational conditions. Only accessories approved by Sepura are recommended for use with this product. Always read the instructions supplied with the accessory for additional safety instructions. The use of non-approved accessories may invalidate any product warranty. If a non-approved accessory is fitted, it may compromise the…

Text truncated - open the document above for the full version.

Statement of Voice Channel for FCC ID: XX6SEM8010H Dear Sir or Madam We, Sepura plc, hereby declare that our product: DMR Mobile Radio (FCC ID: XX6SEM8010H), covered by this certification is capable of supporting a voice channel and a minimum data rate of 4800 bits per second per 6.25kHz of channel bandwidth. Yours faithfully, Steve Wood Verification Engineering Team Leader 04 March 2015

FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 19 November 2014 FCC Agent Authorization To whom it may concern We, Sepura plc, the undersigned, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from Sepura plc. Yours faithfully, Steve Wood Verification Engineering Team Leader

FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 16 January 2015 FCC Confidential Authorization Dear Sir or Madam Confidentiality Request regarding application for certification of FCC ID: XX6SEM8010H Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below:  Detailed Circuit Schematics of EUT --- (Long term)  Block Diagram --- (Long term)  Circuit Description --- (Long term)  Part List --- (Long term)  Tune up --- (Long term) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Yours faithfully, Steve Wood Verification Engineering Team Leader

Date: 2015-01-16 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Colombia, Maryland 21046 Subject: Extended Frequency Justification. Dear Sir/Madam, The Mobile Radio with FCC ID: XX6SEM8010H was designed to operate in the frequency bands 136~174MHz. To aid equipment authorization in other countries which accept the United States FCC Grant for certification, Sepura plc is requesting that the FCC lists the frequencies 136~174MHz, under FCC Rules Parts 22 and 90 on the FCC Grant. Sepura plc attests that the radio will not be marketed to USA users with the frequency band which is not allowed by the rule part 22 and 90. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Also, equipment programming is the responsibility of Authorized Service Personnel, the DMR mobile complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Sincerely, Company Officer: Steve Wood Telephone Number: +44 (01223) 877354 Email: [email protected] Position: Verification Engineering Team leader Frequency Range (MHz） FCC Rule Part 136-150.8 MHz For Federal 150.8-152.855MHz FCC Part 22/90 152.855-154MHz FCC Part 90 154-156.2475MHz FCC Part 90 157.1875-157.45MHz FCC Part 90 157.45-161.575MHz FCC Part 22/90 161.575-161.625MHz FCC Part 22 161.625-161.775MHz FCC Part 22 161.755-161.9625MHz FCC Part 90 162.0375-173.2MHz FCC Part 90 173.2-173.4MHz FCC Part 90 173.4-174MHz For Federal

Page 1 of 10 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT– All View EUT–Top View Page 2 of 10 EUT– Bottom View EUT– Left Side View Page 3 of 10 EUT– Right Side View EUT–Front Side View Page 4 of 10 EUT– Rear Side View EUT – Std. Fist Mic. Top View Page 5 of 10 EUT – Std. Fist Mic. Bottom View EUT – Std. Keypad Mic Top View Page 6 of 10 EUT– Mobile Desktop Mic View EUT – Desktop Mounting Unit View Page 7 of 10 EUT – DMR DIN Mount Bracket View EUT –USB Data Lead(PEI) View Page 8 of 10 EUT– I/O Interface Lead (Vehicle) View EUT– Programming Cable View Page 9 of 10 EUT– DC Power Cable View EUT – Adapter View Page 10 of 10 EUT – Adapter Label View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Page 1 of 7 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT– Uncover View EUT– Uncover View Page 2 of 7 EUT– Uncover View EUT– Display Board Top View Page 3 of 7 EUT–Display Board Bottom View EUT– Uncover View Page 4 of 7 EUT– Main Board Top View EUT–Main Board Top without Shielding View Page 5 of 7 EUT– Main Board Bottom View EUT–Main Board Bottom without Shielding View Page 6 of 7 EUT– Uncover View EUT–Sub Board Top View Page 7 of 7 EUT–Sub Board Bottom View

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG140826002-00 FCC Part 22 and 90 Page 8 of 42 FCC §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to 1.1307 (b)(1), 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for Maximum Permissible Exposure (MPE) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E|, |H| or S (minutes) 0.3- 3.0 614 1.63 (100)* 6 3.0 - 30 1842/f 4.89/f (900/f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 f = frequency in MHz; * = Plane-wave equivalent power density; MPE Calculation Predication of MPE limit at a given distance S = PG/4πR 2 Where: S = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG140826002-00 FCC Part 22 and 90 Page 9 of 42 Calculated Data: Frequency Conducted Output Power Antenna Cable Loss （dB） Typical Antenna Gain Distance Power Density Limit MHz mW dBinumericcm mW/cm 2 mW/cm 2 155.0125 50491 2.0 0 1.0 120 0.176 1.0 Note1: The manufacturer does not specify an antenna to be used with this device，but a typical installation has a gain up to 0 dBi. Note2: The target power is 45 W (46.53 dBm) ±0.5 dB = 50491 mW (47.03 dBm) Radio Exposure Statement: To comply with RF exposure requirements, a minimum separation distance of 120 cm is required between antenna and all public persons. Result: Compliant.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 22 and 90 TEST REPORT For Sepura plc Radio House, St. Andrews Road, Cambridge CB4 1GR UK FCC ID: XX6SEM8010H Report Type: Original Report Product Type: DMR Mobile Radio Test En gineer: Dean Liu Re port Number: RDG140826002-00 Re port Date: 2014-09-11 Reviewed B y: Sula Huang RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG140826002-00 FCC Part 22 and 90 Page 2 of 42 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 7 FCC §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................................................... 8 APPLICABLE STANDARD .............................................................................................................................................. 8 FCC §2.1046 &§ 22.727 & §90.205- RF OUTPUT POWER .................................................................................. 10 APPLICABLE STANDARD ............................................................................................................................................ 10 TEST PROCEDURE ...................................................................................................................................................... 10 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 10 TEST DATA ................................................................................................................................................................ 10 FCC §2.1047 & §90.207 - MODULATION CHARACTERISTIC .......................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 TEST PROCEDURE ...................................................................................................................................................... 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §2.1049& §22.357 & § 22.731 &§90.209 & §90.210 – OCCUPIED BANDWIDTH & EMISSION MASK 16 APPLICABLE STANDARD ............................................................................................................................................ 16 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 17 TEST PROCEDURE ...................................................................................................................................................... 17 TEST DATA ................................................................................................................................................................ 17 FCC §2.1051& §22.861 & §90.210 - SPURIOUS EMISSIONS AT ANTENNA TERMINALS ........................... 25 APPLICABLE STANDARD ............................................................................................................................................ 25 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 25 TEST PROCEDURE ...................................................................................................................................................... 26 TEST DATA .........…

Text truncated - open the document above for the full version.

Page 1 of 1 EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission View (Below 1 GHz) Radiated Emission View (Above 1 GHz)