Y22-S5IOWICON ANC/ICON ANC XT

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Skullcandy Inc Address 6301 N Landmark Dr, Park City 84098, United States FRN 0020373023 Grantee Code Y22 FCC ID Y22-S5IOW Authorized Contact Name James Nance Contact Email [email protected] Contact Phone 435-729-2698 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Skullcandy Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Skullcandy Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2024-07-30 Print Name: James Nance Title: General Counsel & Administrative Officer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2024-01-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Skullcandy Inc Company Name: Skullcandy Inc FRN: 0020373023 FRN: 0020373023 Grantee Code: Y22 Contact Name: James Nance Contact Name James Nance Address: 6301 N Landmark Dr Address: 6301 N Landmark Dr City/Province/Zip: Park City, Utah 84098 City/Province/Zip: Park City, Utah 84098 Telephone: 435-729-2698 Telephone: 435-729-2698 Fax: 435-729-2698 Fax: 435-729-2698 Email: [email protected] Email: [email protected] ATTN: Director of Certification: We, Skullcandy Inc understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Skullcandy Inc acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): James Nance Name (Printed): James Nance Title: General Counsel & Administrative Officer Title: General Counsel & Administrative Officer Signature: Signature:

Skullcandy Inc. Date: 2024-07-30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:Y22-S5IOW To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) shenzhen branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Skullcandy Inc. This authorization is valid until further written notice from the applicant. Print Name: James Nance Title: General Counsel & Administrative Officer Signature: On behalf of Company: Skullcandy Inc. Telephone: 435-729-2698 E-mail: [email protected]

Skullcandy Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: Y22-S5IOW LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the de vice is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: James Nance Title: General Counsel & Administrative Officer Signature: On behalf of Company: Skullcandy Inc. Telephone: 435-729-2698 E-mail: [email protected]

Page 1 of 1Designed In Park City, UT Information in this file (including any attachments) is confidential. The sender did not intend to waive any privilege by sending this message. If you are not the intended recipient of this message, please notify the sender by replying to this message and delete the original and any copies of the message. Any duplication, dissemination or distribution of this message by unintended recipients is prohibited. PARK CITY, UTDIRTBOYZ MFG / MILKHOLE ENTERPRISES MODEL NAME: ICONCOMPLIANCE MARKINGS COMPLIANCE MARKINGS COMPLIANCE MARKINGS LEFT EARCUP - under ear cushionIn - Tool TOP OF EARCUP Left Right TOP OF EARCUP Right Earcup Tier 2 TIER 2 DATE CODE LEFT SLIDERLAZER ETCH 2mm FONT: 2.0mm Helvetica REMARKS DESIGNER DATE Initial Release RB 01/18/24 Model #RB 02/26/24 move for notchRB 06/18/24 RRHHHH-YYWW RH-RRRYYWW RIGHT SLIDERLAZER ETCH Location CCAMXXXXXXXXX R-C -Sku- S5IOW 018-240148 CMIIT ID: XXXXXXXXX IFT: XXXXXX- XXXXX FCC ID : Y22-S5IOWIC: 10486A-S5IOW C-XXXXX Skullcandy Inc. 6301 N Landmark Dr Park City, UT 84098, USA Made In Vietnam R-C -Sku- S5IOW FCC ID : Y22-S5IOWIC: 10486A-S5IOW Made In Vietnam R-C -Sku- S5IOW FCC ID : Y22-S5IOWIC: 10486A-S5IOW Made In Vietnam CCAMXXXXXXXXX R-C -Sku- XS5IOW CMIIT ID: XXXXXXXXX IFT: XXXXXX-XXXXXFCC ID : Y22- S5IOW IC: 10486A-S5IOW C-XXXXX Made In Vietnam ACTUAL SIZE ACTUAL SIZE Right Earcup Tier 1 TIER 1 ICON ANC MODEL:S5IOW Skullcandy Inc. 6301 N Landmark Dr Park City, UT 84098, USA ICON ANC MODEL:S5IOW 018-240148 018-240148 RRHHHH-YYWW

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235704 Page: 1 of 13 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2406002357AT Applicant: SKULLCANDY,INC. Address of Applicant: 6301 N Landmark Dr Park City, UT 84098, United States of America Manufacturer: SKULLCANDY,INC. Address of Manufacturer: 6301 N Landmark Dr Park City, UT 84098, United States of America Equipment Under Test (EUT): EUT Name: ICON ANC/ICON ANC XT Model No.: S5IOW Trade Mark: Skullcandy FCC ID: Y22-S5IOW Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2024-06-19 Date of Evaluation: 2024-06-25 to 2024-07-01 Date of Issue: 2024-07-03 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235704 Page: 2 of 13 Revision Record Version Chapter Date Modifier Remark 01 2024-07-03 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235704 Page: 3 of 13 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 6 3.5 Test Facility ........................................................................................................................................ 6 3.6 Deviation from Standards ................................................................................................................... 6 3.7 Abnormalities from Standard Conditions ........................................................................................... 6 4 FCC Radiofrequency radiation exposure limits .................................................................................... 7 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 7 4.2 MPE-based Exemption ...................................................................................................................... 7 4.3 SAR-based Exemption ....................................................................................................................... 8 5 Measurement and Calculation ............................................................................................................... 12 5.1 Maximum transmit power ................................................................................................................. 12 5.2 RF Exposure Calculation ................................................................................................................. 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235704 Page: 4 of 13 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: DC 3.7V/600mAh rechargeable battery which charged by USB port. Cable(s): USB cable:53cm unshielded Aux in cable:125cm unshielded For BT: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.3 Dual mode Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PCB Antenna Antenna Gain: 1.09dBi For BLE: Operation Frequency: BLE 1Mbps: 2402MHz to 2480MHz; BLE 2Mbps: 2404MHz to 2478MHz (Except for 2426 MHz) Bluetooth Version: V5.3 Dual mode Modulation Type: GFSK Data Rate: 1Mbps, 2Mbps Number of Channels: BLE 1Mbps: 40 BLE 2Mbps: 37 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: 1.09dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235704 Page: 5 of 13 3.3 Separation Distance Minimum test separation distance: 24.94mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235704 Page: 6 of 13 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified,…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 1 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 ANTENNA PASSIVE TEST REPORT Application No.SZOA2406000136AT ApplicantSKULLCANDY, INC. ManufacturerSKULLCANDY, INC. Product NameICON ANC Model No.S5IOW StandardsANSI/IEEE Std 149-2021 Date Initial Sample(s) ReceivedJun 25, 2024 Testing Start DateJun 25, 2024 Testing Finish DateJun 25, 2024 Report Issue DateJul 1,2024 *In the configuration tested, the EUT detailed in this report complied with the standards specified above. Prepared by: Turner He/ Test Engineer Approved by: Ervin Li/ Technical Manager ` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 2 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 Revision History RevisionIssue DateDescription 01Jul 29,2024Initial creation of report ` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 3 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 TABLE OF CONTENTS 1GENERAL INFORMATION....................................................................................................4 1.1Testing Laboratory..............................................................................................................................4 1.2Details of Applicant.............................................................................................................................4 1.3Details of Manufacturer......................................................................................................................4 1.4General Description of EUT..................................................................................................................5 1.5Test Procedure....................................................................................................................................5 1.6Test Specification................................................................................................................................6 1.7Laboratory Environment......................................................................................................................6 2OTA MEASUREMENTS SYSTEM CONFIGURATION......................................................7 2.1Test Configuration...............................................................................................................................7 3TEST EQUIPMENT LIST.......................................................................................................8 4MEASUREMENT UNCERTAINTY.......................................................................................9 5TEST RESULTS.....................................................................................................................10 6PATTERN PLOTS.................................................................................................................12 6.1Return Loss........................................................................................................................................12 6.2VSWR................................................................................................................................................12 6.3Stimulus............................................................................................................................................13 72-D ANTENNA PATTERN(THETA=90°).......................................................................14 83-D ANTENNA PATTERN..................................................................................................15 ` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 4 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 1General Information 1.1Testing Laboratory Test Lab SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Address No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 ContactErvin Li Tel.+86 18823369694 Fax+86-755-25328600 [email protected] 1.2Details of Applicant Applicant’s NameSKULLCANDY,INC. Applicant’s Address 6301 N Landmark Dr Park City, UT 84098, United States of America ContactANDREW CARTER Tel. 404-56-0830 Fax N/A E-mail [email protected] 1.3Details of Manufacturer Manufacturer’s NameSKULLCANDY,INC. Manufacturer’s Address 6301 N Landmark Dr Park City, UT 84098, United States of America ContactANDREW CARTER Tel. 404-56-0830 Fax N/A E-mail [email protected] ` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 5 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 1.4General Description of EUT Device Description: ICON ANC. Device Manufacturer: SKULLCANDY, INC. Device Model: S5IOW Hardware Version:N/A Software Version:N/A Air Interface Supported2.4GHz BLE Dimension:72mm*188mm*174mm 1.5Test Procedure Testing is performed according to the ANSI/IEEE Std 149-2021. ` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 6 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 1.6Test Specification IdentityDocument Title ANSI/IEEE Std 149-2008IEEE Standard Test Procedures for Antennas 1.7Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect0.7-6GHz> 100dB Ground resistance <0.5 ` SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch Report No.: SZOA2406000136AT01 Rev.:01 Page: 7 of 17 Report Template No./Rev: SZWI-TRF-OA006/ v02 2OTA Measurements System Configuration 2.1Test Configuration Testing Condition: Temperature: 22±3 ̊C Humidity: <80% Measurement Facility: Great-Circle-Cut method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test (EUT) geometry centre vertical projection at the centre…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235703 Page: 1 of 77 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2406002357AT Applicant: SKULLCANDY,INC. Address of Applicant: 6301 N Landmark Dr Park City, UT 84098, United States of America Manufacturer: SKULLCANDY,INC. Address of Manufacturer: 6301 N Landmark Dr Park City, UT 84098, United States of America Equipment Under Test (EUT): EUT Name: ICON ANC/ICON ANC XT Model No.: S5IOW Trade Mark: Skullcandy FCC ID: Y22-S5IOW Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2024-06-19 Date of Test: 2024-06-25 to 2024-07-01 Date of Issue: 2024-07-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235703 Page: 2 of 77 Revision Record Version Chapter Date Modifier Remark 01 2024-07-03 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235703 Page: 3 of 77 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240600235703 Page: 4 of 77 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 11 6.1 Antenna Requirement ...................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ................................................................................................................................... 11 7 Radio Spectrum Matter Test Results .................................................................................................... 12 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ............................................................. 12 7.1.1 E.U.T. Operation .......................................................................................................................... 12 7.1.2 Test Mode Description ................................................................................................................. 12 7.1.3 Test Setup Diagram ..................................................................................................................... 13 7.1.4 Measurement Procedure and Data............................................................................................. 13 7.2 Radiated Emissions which fall in the restricted bands ..............................…

Text truncated - open the document above for the full version.