Y22-S6PPYPLYR

018-220194

Skullcandy Inc. Date: 2022-06-16 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:Y22-S6PPY To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Skullcandy Inc. This authorization is valid until further written notice from the applicant. Print Name: Tom Brace Title: Global Legal Compliance Manager Signature: On behalf of Company: Skullcandy Inc. Telephone: 435-729-2458 E-mail: [email protected]

Skullcandy Inc. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID:Y22-S6PPY LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely By: Tom Brace (Signature) (Print name) Title: Global Legal Compliance Manager On behalf of: Skullcandy Inc. (Company Name) Telephone: 435-729-2458 SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s)

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Skullcandy Inc. Address 6301 N Landmark Dr Park City Utah United States Grantee Code Y22 FCC ID Y22-S6PPY Authorized Contact Name Tom Brace Contact Email [email protected] Contact Phone 435-729-2458 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2022-06-16 Print Name: Tom Brace Title: Global Legal Compliance Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 5 Appendix External Photos for GZCR2204000524AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 5 EMC-ARF-02 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 5 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 5 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 5 EMC-ARF-02 Rev 1.0

Page 1 of 3Designed In Park City, UT Information in this file (including any attachments) is confidential. The sender did not intend to waive any privilege by sending this message. If you are not the intended recipient of this message, please notify the sender by replying to this message and delete the original and any copies of the message. Any duplication, dissemination or distribution of this message by unintended recipients is prohibited. PARK CITY, UTDIRTBOYZ MFG / MILKHOLE ENTERPRISES MODEL: S6PPY PLYR MADE IN CHINA. Skullcandy Inc 6301 N Landmark Drive Park City, UT 84098, USA Skullcandy Inc 6301 N Landmark Drive Park City, UT 84098, USA In-Tool Date Code - RIGHT SIDELazer Etch MODEL NAME: SG100COMPLIANCE MARKINGS REMARKS DESIGNER DATE Initial Compliance Release KA 07/27/21 Data CodeRB08/17/21 Added Model # / updated marking layout per new CADKA08/24/21 Updated Layout. Critical markings to earcup / Added sticker for DIGI SKUs KA10/01/21 Updated Factory Date Code. KA10/01/21 Updated Earcup Markings to Pad PrintKA11/03/21 Updated Earcup “Pad Print “ Finish SpecKA11/09/21 TEIR 1 Compliance Markings - ISC RIGHT AND LEFT SIDE. PAD PRINTTEIR 1 Compliance Markings - EARCUP RIGHT AND LEFT SIDE. LEFT - SIDE RIGHT - SIDE AD-XXXX AD-XXXX MODEL: S6PPY PLYR MADE IN CHINA. AD-XXXX AD-XXXX FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY Updated Compliance Marking location with updated CADKA 08/05/21 *All Pad Print Markings should have a GLOSSY finish*All Pad Print Markings should have a GLOSSY finish FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY Page 2 of 3Designed In Park City, UT Information in this file (including any attachments) is confidential. The sender did not intend to waive any privilege by sending this message. If you are not the intended recipient of this message, please notify the sender by replying to this message and delete the original and any copies of the message. Any duplication, dissemination or distribution of this message by unintended recipients is prohibited. PARK CITY, UTDIRTBOYZ MFG / MILKHOLE ENTERPRISES MODEL: S6PPY PLYR MADE IN CHINA. Skullcandy Inc 6301 N Landmark Drive Park City, UT 84098, USA Skullcandy Inc 6301 N Landmark Drive Park City, UT 84098, USA In-Tool MODEL NAME: SG100COMPLIANCE MARKINGS LEFT - SIDE RIGHT - SIDE AD-XXXX MODEL: S6PPY PLYR MADE IN CHINA. AD-XXXX FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY CMIIT ID:XXXXX-X IFT: XXXXX-YYYYY XXX-XXXXXX XXXXXXXXXXXXXX X-00000 CMIIT ID:XXXXX-X IFT: XXXXX-YYYYY XXX-XXXXXX XXXXXXXXXXXXXX X-00000 FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY TEIR 2 Compliance Markings - ISC /EARCUP RIGHT AND LEFT SIDE. PAD PRINTTEIR 1 Compliance Markings - EARCUP RIGHT AND LEFT SIDE. *All Pad Print Markings should have a GLOSSY finish*All Pad Print Markings should have a GLOSSY finish Page 3 of 3Designed In Park City, UT Information in this file (including any attachments) is confidential. The sender did not intend to waive any privilege by sending this message. If you are not the intended recipient of this message, please notify the sender by replying to this message and delete the original and any copies of the message. Any duplication, dissemination or distribution of this message by unintended recipients is prohibited. PARK CITY, UTDIRTBOYZ MFG / MILKHOLE ENTERPRISES STICKER DIELINE Print Color: Cool Gray 5 Sticker Color: Clear *Sticker to be applied directly over In-Tool Markings*Sticker to be applied directly over In-Tool Markings STICKER DIELINE Print Color: Cool Gray 5 Sticker Color: Clear STICKER DIELINE Print Color: Cool Gray 5 Sticker Color: Clear *Sticker to be applied directly over In-Tool Markings*Sticker to be applied directly over In-Tool Markings STICKER DIELINE Print Color: Cool Gray 5 Sticker Color: Clear In-Tool MODEL NAME: SG100COMPLIANCE MARKINGS LEFT - SIDE RIGHT - SIDE THIS PAGE IS ONLY FOR DIGI HYPE SKU’s THIS PAGE IS ONLY FOR DIGI HYPE SKU’s THIS PAGE IS ONLY FOR DIGI HYPE SKU’s THIS PAGE IS ONLY FOR DIGI HYPE SKU’s FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY TEIR 1 Compliance Markings - ISC STICKER RIGHT AND LEFT SIDE In-Tool LEFT - SIDE RIGHT - SIDE CMIIT ID:XXXXX-X IFT: XXXXX-YYYYY XXX-XXXXXX XXXXXXXXXXXXXX X-00000 CMIIT ID:XXXXX-X IFT: XXXXX-YYYYY XXX-XXXXXX XXXXXXXXXXXXXX X-00000 FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY FCC ID:Y 22-S6PPY IC:1 0486A-S6PPY R-C-Sku-S6PPY TEIR 2 Compliance Markings - ISC /EARCUP RIGHT AND LEFT SIDE. CMIIT ID:XXXXX-X IFT: XXXXX-YYYYY XXX-XXXXXX XXXXXXXXXXXXXX X-00000

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 4 Appendix Internal Photos for GZCR2204000524AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 4 EMC-ARF-03 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 4 EMC-ARF-03 Rev 1.0 Antenna SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 4 EMC-ARF-03 Rev 1.0

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR220400052403 Page: 1 of 8 FCC ID: Y22-S6PPY Kobe Jian EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2204000524AT Applicant: SKULLCANDY, INC. Address of Applicant: 6301 N Landmark Dr Park City UT 84098, Utah United States of America Manufacturer: SKULLCANDY, INC. Address of Manufacturer: 6301 N Landmark Dr Park City UT 84098, Utah United States of America Equipment Under Test (EUT): EUT Name: PLYR Model No.: S6PPY Trade Mark: Skullcandy Standard(s) : 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2022-04-25 Date of Evaluation: 2022-04-26 to 2022-05-09 Date of Issue: 2022-05-18 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052403 EMC-TRF-03 Rev 1.0 Page: 2 of 8 Revision Record Version Chapter Date Modifier Remark 01 2022-05-18 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052403 EMC-TRF-03 Rev 1.0 Page: 3 of 8 2 Evaluation Summary Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052403 EMC-TRF-03 Rev 1.0 Page: 4 of 8 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Evaluation Summary ................................................................................................................................ 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 5 4.1 Details of E.U.T. ................................................................................................................................. 5 4.2 Evaluating Location ............................................................................................................................ 6 4.3 Facility ................................................................................................................................................ 6 4.4 Deviation from Standards ................................................................................................................... 6 4.5 Abnormalities from Standard Conditions ........................................................................................... 6 5 Technical Requirements Specification ................................................................................................... 7 5.1 Limit & Test Method ........................................................................................................................... 7 5.1.1 Conclusion ..................................................................................................................................... 7 6 EUT Constructional Details (EUT Photos) ............................................................................................. 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052403 EMC-TRF-03 Rev 1.0 Page: 5 of 8 4 General Information 4.1 Details of E.U.T. Power supply: DC 3.7V by rechargeable Lithium Battery and recharged by DC 5V. Cable(s): AXU in cable: 153cm, Unshielded USB type-C: 185cm, Unshielded MIC Cable:13.5cm, Unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 Dual mode For BT: Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PCB Antenna Antenna Gain: 3.36dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Date Rate: 1Mbps Antenna Type: PCB Antenna Antenna Gain: 3.36dBi SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052403 EMC-TRF-03 Rev 1.0 Page: 6 of 8 4.2 Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. 4.3 Facility The facility is recognized, certified, or accredited by the following organizations: ● NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● CNAS (Lab Code: L0167) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been assessed and in compliance with CNAS-CL01:2018 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2017 General Requirements)…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR220400052402 Page: 1 of 64 FCC ID: Y22-S6PPY Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2204000524AT Applicant: SKULLCANDY, INC. Address of Applicant: 6301 N Landmark Dr Park City UT 84098, Utah United States of America Manufacturer: SKULLCANDY, INC. Address of Manufacturer: 6301 N Landmark Dr Park City UT 84098, Utah United States of America Equipment Under Test (EUT): EUT Name: PLYR Model No.: S6PPY Trade Mark: Skullcandy Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-04-25 Date of Test: 2022-04-26 to 2022-05-09 Date of Issue: 2022-05-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052402 Page: 2 of 64 Revision Record Version Chapter Date Modifier Remark 01 2022-05-18 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052402 Page: 3 of 64 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1.3 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Below 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Above 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220400052402 Page: 4 of 64 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 13 6.1 Antenna Requirement ...................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................... 13 7 Radio Spectrum Matter Test Results .................................................................................................... 14 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ............................................................. 14 7.1.1 E.U.T. Operation .......................................................................................................................... 14 7.1.2 Test Mode Description ................................................................................................................. 14 7.1.3 Test Setup Diagram ..................................................................................................................... 14 7.1.4 Measurement Procedure and Dat…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 1 of 3 Appendix Test Setup Photo for GZCR2204000524AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 3 EMC-ARF-04 Rev 1.0 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 3 EMC-ARF-04 Rev 1.0 Radiated Spurious Emissions (Below 1GHz) Radiated Spurious Emissions (Above 1GHz)