Y2ULDX100Grass Valley LDX100 4K broadcast camera system

User’s Guide 13-00096-000 2020-12-24 LDX 100 LIVE PRODUCTION CAMERA ii Notices FCC Compliance In order to comply with FCC/CFR47: Part 15 regulations, it is necessary to use high-quality, triple-screened Media or Monitor cable assemblies with integrated ferrite suppression at both ends. Patent Information This product may be protected by one or more patents. For further information, please visit: www.grassvalley.com/patents/ Copyright and Trademark Notice Grass Valley®, GV® and the Grass Valley logo and/or any of the Grass Valley products listed in this document are trademarks or registered trademarks of GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or subsidiaries. All other intellectual property rights are owned by GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or subsidiaries. All third party intellectual property rights (including logos or icons) remain the property of their respective owners. Copyright ©2020-2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. Terms and Conditions Please read the following terms and conditions carefully. By using LDX 100 Series documentation, you agree to the following terms and conditions. Grass Valley hereby grants permission and license to owners of LDX 100 Series to use their product manuals for their own internal business use. Manuals for Grass Valley products may not be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose unless specifically authorized in writing by Grass Valley. A Grass Valley manual may have been revised to reflect changes made to the product during its manufacturing life. Thus, different versions of a manual may exist for any given product. Care should be taken to ensure that one obtains the proper manual version for a specific product serial number. Information in this document is subject to change without notice and does not represent a commitment on the part of Grass Valley. Warranty information is available from the Legal Terms and Conditions section of Grass Valley’s website ( www.grassvalley.com). TitleLDX 100 User’s Guide Part Number13-00096-000 Revision2020-12-24, 09:56 iii LDX 100 User’s Guide Important Safety Information This section provides important safety guidelines for operators and service personnel. Specific warnings and cautions appear throughout the manual where they apply. Please read and follow this important information, especially those instructions related to the risk of electric shock or injury to persons. Symbols and Their Meanings Indicates that dangerous high voltage is present within the equipment enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Indicates that the user, operator or service technician should refer to the product manuals for important operating, maintenance, or service instructions. Indicates that static sensitive components are present, which may be damaged by electrostatic discharge. Use anti-static procedures, equipment and surfaces during servicing. The presence of this symbol in or on Grass Valley equipment means that it has been tested and certified as complying with applicable Underwriters Laboratory (UL) regulations and recommendations for USA. The presence of this symbol in or on Grass Valley equipment means that it has been tested and certified as complying with applicable Canadian Standard Association (CSA) regulations and recommendations for USA/Canada. The presence of this symbol in or on Grass Valley equipment means that it has been tested and certified as complying with applicable Underwriters Laboratory (UL) regulations and recommendations for USA/Canada. The presence of this symbol in or on Grass Valley equipment means that it has been tested and certified as complying with applicable Intertek Testing Services regulations and recommendations for USA/Canada. The presence of this symbol in or on Grass Valley product means that it complies with all applicable European Union (CE) directives. The presence of this symbol in or on Grass Valley product means that it complies with safety of laser product applicable standards. iv Notices Warnings A warning indicates a possible hazard to personnel, which may cause injury or death. Observe the following general warnings when using or working on this equipment: • Any instructions in this manual that require opening the equipment cover or enclosure are for use by qualified service personnel only. • Do not operate the equipment in wet or damp conditions. If the unit is in a wet or damp environment, a rain cover must be used to protect it for personal safety reasons. • Disconnect power before cleaning the equipment. Do not use liquid or aerosol cleaners; use only a damp cloth. • Dangerous voltages may exist at several points in this equipment. To avoid injury, do not touch exposed connections and components while power is on. • Prior to servicing, remove jewelry such as rings, watches, and other metallic objects. • To avoid explosion, do not operate this equipment in an explosive atmosphere. • Have qualified service personnel perform safety checks after any service. Cautions A caution indicates a possible hazard to equipment that could result in equipment damage. Observe the following cautions when operating or working on this equipment: • Products that have no on/off switch, and use an external power supply must be installed in proximity to a main power outlet that is easily accessible. • Do not operate with suspected equipment failure. If you suspect product damage or equipment failure, have the equipment inspected by qualified service personnel. • To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. • Follow static precautions at all times when…

Text truncated - open the document above for the full version.

133 LDX 100 User’s Guide VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 Video RX 2 Stream ActiveYe s, No 1 Pkts in Buffer<nnn> 1 VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 Video RX 3 Stream ActiveYe s, No 1 Pkts in Buffer<nnn> 1 VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 Audio Stream ActiveYe s, No 1 ProfileOk, NotOk 1 Intercom Stream ActiveYe s, No 1 ProfileOk, NotOk 1 PTP StatusListening, Calibrating, Locked, GM-found, Off 1 Path Delay<nnn>1 Offset to Master-30000..30000 (0)1 Selected GMNone, GM 1, GM 21 GM 1 Info ID???1 IP???1 StatusListening, Calibrating, Locked, Off 1 Function:Values:Usr:Description: 134 Menu references Diagnostics menu Path Delay<nnn>1 Offset to Master-30000..30000 (0)1 Prio 10..255 (0)1 Prio 20..255 (0)1 Class0..255 (0)1 Accuracy0..255 (0)1 GM 2 Info ID???1 IP???1 StatusListening, Calibrating, Locked, Off 1 Path Delay<nnn>1 Offset to Master-30000..30000 (0)1 Prio 10..255 (0)1 Prio 20..255 (0)1 Class0..255 (0)1 Accuracy0..255 (0)1 Nmos Server Priority0..255 (0)1 IP<IP address>1 Port<port>1 TxApplicationS Private DataOff, Active, NoDest0 Reference UserSelectSDI Input, PTP, TriLvl, Composite, FreeRun 0 Lock SourceUnknown, SDI Input, PTP, TriLvl, Composite, XF, FreeRun, FreeRun 0 Lock StandardUnknown, 1080i59, 1080i50, 720p59, 720p50, 1080p59, 1080p50, PAL, NTSC, SD, 4K50, 4K59 0 LockedYe s, N o, Invalid0 Video Inputs Extern 1 AvailableYe s, No1 Function:Values:Usr:Description: 135 LDX 100 User’s Guide VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 Extern 2 AvailableYe s, No1 VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 Extern 3 AvailableYe s, No1 VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 BNC-D AvailableYe s, No1 VideoModeUnknown, SD, 1080i59, 1080i50, 720p50, 720p50, 1080pfs23, 1080p59, 1080p50, 4K59, 4K50, 4K47, 4K29, 4K25, 4K23 1 HDMI ConnectedYe s, No0 VideoModeUnknown, 1080P50, 1080p59, 4K25, 4K29, 4K50, 4K59 0 SampleFormatRGB, YCrCb0 Bits8, 10, 120 HdrModeSDR, PQ, HLG0 XF Transmission System LockedNo, Yes0 Fiber Fib B (XCU->CAM) Function:Values:Usr:Description: 136 Menu references Diagnostics menu Cable StatusOK, Critic, Error, NoSig0 Signal StatusOK, Critic, Error, NoSig0 RX Margin-100 dB..100 dB (0 dB)0 Signal Error Cnt0..65535 (50)0 Fib A (CAM->XCU) Cable StatusOK, Critic, Error, NoSig0 Signal StatusOK, Critic, Error, NoSig0 RX Margin-100 dB..100 dB (0 dB)0 Signal Error Cnt0..65535 (50)0 Ethernet Tunnel CAMOff, 10Mb, 100Mb, 1000Mb 0 XCUOff, On0 ActiveNo, Yes0 Transm Details Fiber Rx MarginS Signal Err CntS Ethernet Err/secS Eye ValueS Ethernet Load Rx Mb/secS Tx Mb/secS Ethernet Packets valid/secS errorS error/secS FEC CorrS FEC Corr/secS Ethernet Network StatusS IP RX Info Loc IPS Port_Ch0S IP TX Info IP_Ch0S Port_Ch0S Function:Values:Usr:Description: 137 LDX 100 User’s Guide Stream LockedS Stream RxBuf_1S Stream RxBuf_2S Stream RxBuf_3S Streams Tx AvailableS Tx Not UsedS Rx RequestedS Rx SubscribedS Ethernet Tunnel MDIOS SGMIIS PhySpeedS Tunnel ActiveS CAMS XCUS Rx PacketsS Tx PacketsS C2IP Trunk Rx PacketsS Tx PacketsS Audio FrontMic Lvl-127..0 (-127)0??? Audio1 Lvl-127..0 (-127)0??? Audio2 Lvl-127..0 (-127)0??? Audio3 Lvl-127..0 (-127)0??? Audio 4 Lvl-127..0 (-127)0??? Configuration Camera Type PID Alias Device ID Number Number MPB Image MPB Config Function:Values:Usr:Description: 138 Menu references Diagnostics menu TXB Image TXB Config Viewfinder Type XCU Type Lens Package Info Package Code Version Component Valid Code Version Service Package Component???2 Code???2 Version???2 Temperature WarningNone, Front, Head, Mpb Fpga, Txb Fpga, Fan, Fan+T, !STOP! 2 Fan ModeOff, Var, Manual2 Fan ProfileSilent+, Silent, Default, Cool 2 Manual Speed3000 rpm..9000 rpm (6000 rpm) 2 Fan Speed Temp (C) Camera-128 C..127 C (0 C)2 MPB FPGA-128 C..127 C (0 C)2 Sitara-128 C..127 C (0 C)2 TXB FPGA-128 C..127 C (0 C)2 Front-128 C..127 C (0 C)2 Sensor Red-128 C..127 C (0 C)S Sensor Green-128 C..127 C (0 C)S Sensor Blue-128 C..127 C (0 C)S Function:Values:Usr:Description: 139 LDX 100 User’s Guide Backpanel-128 C..127 C (0 C)2 Temp (F) Camera-197 F..261 F (0 F)2 MPB FPGA-197 F..261 F (0 F)2 Sitara-197 F..261 F (0 F)2 TXB FPGA-197 F..261 F (0 F)2 Front-197 F..261 F (0 F)2 Sensor Red-197 F..261 F (0 F)S Sensor Green-197 F..261 F (0 F)S Sensor Blue-197 F..261 F (0 F)S Backpanel-197 F..261 F (0 F)2 Front PID2 Code2 Status0..255 (0)2 Red Sensor Imager Gain0 dB..6 dB (0 dB)S Green Sensor Imager Gain0 dB..6 dB (0 dB)S Blue Sensor Imager Gain0 dB..6 dB (0 dB)S Status PCB Status Board2 PID2 Code2 Rev/Ed2 System StatusUnknown, OK, Illegal, Illegal 2 SXP Status SXP SW 12NC2 SXP SW Status2 SXP DetectYe s, NoS SXP Power OnYe s, NoS SXP SW VersionS Status Function:Values:Usr:Description: 140 Menu references Diagnostics menu State??, NoAccess, Recovered, Init, Valid S Oper.Hours0..65535 (0)S Oper.Hours (SXP)0..65535 (0)S Power Cycles0..65535 (0)S Minimum Temp-128 C..127 C (0 C)S Maximum Temp-128 C..127 C (0 C)S High Temp Warn.0..65535 (0)S Function:Values:Usr:Description: 141 LDX 100 User’s Guide Service menu Function:Values:U:F:Description: Test signals Colour barOff, On3-Enable/disable color bar Te s t S i g n a lOff, On3-Enable/disable test signal Te s t S e l e c tSawT, Step3-Select Sawtooth or Stepped signal Licenses Write LogfileExec, BusyS-??? Diag Files File Selection Camera AppLogNo, Ye sS-Select Yes to include Camera Applog in diagnostics file Config InfoNo, Ye sS-Select Yes to include Camera Config in diagnostics file Settings InfoNo, Ye sS-Select Yes to include Settings Info in diagnostics file Usage InfoNo, Ye sS-Select Yes t…

Text truncated - open the document above for the full version.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Grass Valley Nederland B.V. Address: Bergschot 69 City: 4817 PA, Breda Country: Netherlands To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request f or conf identiality FCC ID: Y2ULDX100 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and conf idential treatment of the following materials submitted in support of FCC certif ication application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical inf ormation, which would customarily be guarded f rom competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustif ied benef its for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Conf idential treatment of the f ollowing materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justif ication: It is a new product with an innovative workflow. Due to competition interests, this may not be released yet Date: January 25th 2021 Name and signature of applicant: Leon Derks Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Page 1 of 6 External Photo Module Product name : LDX-100 Test report No. 200301029 Test report No. 200301029 Page 1 of 6 Table of Contents 1 External Photos ....................................................................................................................................... 2 1.1 Front/3D View ....................................................................................................................................... 2 1.2 Back view ............................................................................................................................................... 3 1.3 Top view ................................................................................................................................................ 4 1.4 Side view ................................................................................................................................................ 5 Test report No. 200301029 Page 2 of 6 1 External Photos 1.1 Front/3D View Test report No. 200301029 Page 3 of 6 1.2 Back view Test report No. 200301029 Page 4 of 6 1.3 Top view Test report No. 200301029 Page 5 of 6 1.4 Side view Test report No. 200301029 Page 6 of 6

Page 1 of 7 Internal Photo Module Product name : LDX 100 Test report No. 200301029 Test report No. 200301029 Page 1 of 7 Table of Contents 1 Internal Photos ........................................................................................................................................ 2 Side 1 PCB view ...................................................................................................................................... 2 Side 2 PCB view ...................................................................................................................................... 3 PCB power board ................................................................................................................................... 4 Back panel.............................................................................................................................................. 5 Front module ......................................................................................................................................... 6 Back module .......................................................................................................................................... 6 GPS module ........................................................................................................................................... 7 NFC antenna .......................................................................................................................................... 7 Test report No. 200301029 Page 2 of 7 1 Internal Photos Side 1 PCB view Test report No. 200301029 Page 3 of 7 Side 2 PCB view Test report No. 200301029 Page 4 of 7 PCB power board Test report No. 200301029 Page 5 of 7 Back panel Test report No. 200301029 Page 6 of 7 Front module Back module Test report No. 200301029 Page 7 of 7 GPS module NFC antenna

FCC Test report for parts 15.107, 15.109 Product name : LDX 100 Applicant : Grass Valley Nederland B.V. Test report No. : 200301029 009 v1.00 Report number: 200301029 009 v1.00 Page 1 of 16 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada registration number for the 3 meter test chamber of Telefication is: 4173A-1. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Telefication BV Test Site location Edisonstraat 12a 6902 PK Zevenaar The Netherlands Tel. +31316583180 Fax. +31316583189 Test Site FCC NL0001 Report number: 200301029 009 v1.00 Page 2 of 16 Revision History Version Date Remarks By v0.50 09-06-2020 First draft GG v1.00 19-08-2020 First version GG Report number: 200301029 009 v1.00 Page 3 of 16 Table of Contents Revision History .............................................................................................................................................. 2 Summary of Test results .................................................................................................................................. 4 1 General Description ................................................................................................................................. 5 1.1 Applicant ................................................................................................................................................ 5 1.2 Manufacturer ........................................................................................................................................ 5 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 5 1.4 Product specifications of Equipment under test ................................................................................... 6 1.5 Environmental conditions...................................................................................................................... 6 1.6 Measurement standards ....................................................................................................................... 6 1.7 Applicable standards ............................................................................................................................. 6 1.8 Observation and remarks ...................................................................................................................... 6 1.9 Conclusions ............................................................................................................................................ 7 2 Test configuration of the Equipment Under Test ..................................................................................... 8 2.1 Test mode .............................................................................................................................................. 8 2.2 Test setups ............................................................................................................................................. 8 2.3 Equipment used in the test configuration ........................................................................................... 10 3 Test results ............................................................................................................................................ 11 3.1 Radiated spurious emissions ............................................................................................................... 11 3.1.1 Limit ................................................................................................................................................. 11 3.1.2 Measurement instruments ............................................................................................................. 11 3.1.3 Test setup ........................................................................................................................................ 11 3.1.4 Test procedure ................................................................................................................................ 11 3.1.5 Measurement Uncertainty .............................................................................................................. 11 3.1.6 Plots of the Radiated Spurious Emissions Measurement ................................................................ 12 3.2 Conducted emissions ........................................................................................................................... 14 3.2.1 Limit ................................................................................................................................................. 14 3.2.2 Measurement instruments ............................................................................................................. 14 3.2.3 Te…

Text truncated - open the document above for the full version.

Page 1 of 4 Test Setup Photo Module Product name : LDX-100 and EC2-100 Test report No. 200301029 Test report No. 200301029 Page 1 of 4 Contents 1 Test Setup Photos .................................................................................................................................... 2 1.1 Radiated emissions measurement 30 – 1000 MHz ............................................................................... 2 1.2 Radiated emissions measurement 1 – 18 GHz ...................................................................................... 3 1.3 Radiated emissions measurement 18 – 26 GHz .................................................................................... 4 Test report No. 200301029 Page 2 of 4 1 Test Setup Photos 1.1 Radiated emissions measurement 30 – 1000 MHz Test report No. 200301029 Page 3 of 4 1.2 Radiated emissions measurement 1 – 18 GHz Test report No. 200301029 Page 4 of 4 1.3 Radiated emissions measurement 18 – 26 GHz

Page 1 of 4 Test Setup Photo Module Product name : LDX-100 and VF 7-100-H Test report No. 200301029 Test report No. 200301029 Page 1 of 4 Contents 1 Test Setup Photos .................................................................................................................................... 2 1.1 Radiated emissions measurement 30 – 1000 MHz ............................................................................... 2 1.2 Radiated emissions measurement 1 – 18 GHz ...................................................................................... 3 1.3 Radiated emissions measurement 18 – 26 GHz .................................................................................... 4 Test report No. 200301029 Page 2 of 4 1 Test Setup Photos 1.1 Radiated emissions measurement 30 – 1000 MHz Test report No. 200301029 Page 3 of 4 1.2 Radiated emissions measurement 1 – 18 GHz Test report No. 200301029 Page 4 of 4 1.3 Radiated emissions measurement 18 – 26 GHz