Y4O-IPA46TXWireless Microphone

KARAOKE PRO QUICKSTART GUIDE ENGLISH ( 3 – 4 ) 3 QUICKSTART GUIDE (ENGLISH) 1. Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. 3. Study this setup diagram. 4. Place product in an appropriate position for operation. 5. Make sure all input devices such as microphones, CD players, or MP3 players are turned off and volume settings are set at "zero." 6. Connect all devices as shown. 7. Switch everything on in the following order: • audio input sources (i.e. microphones, instruments, CD/MP3 Players) • KARAOKE PRO 8. When turning off, always reverse this operation: • KARAOKE PRO • last, any input devices FRONT PANEL 1. Microphone Input with Volume Control (1/4") : This mono input accepts a 1/4" input from a microphone. 2. Echo: Use this knob to add or remove an echo effect to the mix. Echo can give your mix a bigger sound (simulating the reverb heard in a large concert). 3. Master Volume Control: This knob controls the master volume of the KARAOKE PRO as well as the volume for the Aux inputs. 4. Power LED : Indicates whether KARAOKE PRO is on or off. 5. iPad® Cradle: This cradle holds your iPad. 6. Aux inputs : These 1/8” inputs are used to connect a device such as a CD player or MP3 player. Their signal level is controlled by the Master Volume Control. 7. Mic Holder : This is used to secure your mic when it is not being used. 8. Power On/Off Switch : Use this to turn the unit on or off. 9. Power Cable Input : Insert the included power adapter here to charge the unit. BOX CONTENTS ƒ Karaoke Pro Speaker System ƒ Wireless Microphone ƒ 1/8” stereo to 1/8” stereo cable ƒ Power adapter ƒ Quickstart Guide FRONT PANEL INPUT 1 2 3 4 5 6 6 7 8 9 iPad is a trademark of Apple, Inc., registered in the U.S.A. and other countries. Go to http://www.ionaudio.com for product registration. 4 IMPORTANT NOTES Use this troubleshooting guide if: The sound is distorted at high volumes . • The sound is distorted: Try lowering the volume control of your sound source or music instrument. Also, try to reduce the overall volume of KARAOKE PRO. • There is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs. • There is a high-pitched whistling noise when using a microphone: This is probably feedback. Point the microphone away from the speaker. SPECIFICATIONS Input Voltage: 9V DC, 1.5A Center Pin Positive Input Wattage: 13.5W Output Wattage: 7W (Peak) www.ionaudio.com COMPLIANCE v1.3 IMPORTANT SAFETY INSTRUCTIONS & WARRANTY INFORMATION ::: ENGLISH ( 3 – 6 ) ::: INSTRUCCIONES IMPORTANTES DE SEGURIDAD E INFORMACIÓN DE LA GARANTÍA ::: ESPAÑOL ( 7 – 9 ) ::: INSTRUCTIONS IMPORTANTES DE SÉCURITÉ ET INFORMATIONS DE GARANTIE ::: FRANÇAIS ( 10 – 12 ) ::: WICHTIGE SICHERHEITSANWEISUNGEN UND GARANTIEINFORMATIONEN ::: DEUTSCH ( 13 – 15 ) ::: ISTRUZIONI IMPORTANTI DI SICUREZZA E LE INFORMAZIONI DELLA GARANZIA ::: ITALIANO ( 16 – 18 ) ::: N3N WARRANTY FOR U.S.A. PRODUCT PURCHASES 1. What is covered and for how long? ALL PRODUCTS: ION AUDIO warrants to the original purchaser that ION AUDIO's products and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized ION AUDIO dealer and continuing for the following period of time after that date for ninety (90) days. ION AUDIO warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable. 2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover: ƒ Damage caused by improper installation or improper connection to any peripheral ƒ Damage caused by an external electrical fault ƒ Damage from use of parts not manufactured or sold by ION AUDIO ƒ Product purchased from anyone other than a ION AUDIO authorized dealer ƒ Modifications to product not approved in writing by ION AUDIO ƒ Equipment that has the serial number removed or made illegible ƒ Normal cosmetic and mechanical wear ƒ Damage or loss during transit to an Authorized ION AUDIO Repair Center ƒ Units that are purchased and/or located outside of the continental USA 3. What are ION AUDIO's obligations? During the applicable warranty period, ION AUDIO will repair or replace, at ION AUDIO’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, purchaser must first contact ION AUDIO and obtain a return authorization number ("RA#"). Purchaser must then return the product to ION AUDIO in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the product, contact ION AUDIO customer service at 401-658-3743. Upon receipt, ION AUDIO will repair or replace the defective products. ION AUDIO may, at ION AUDIO’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment become the property of ION AUDIO. If ION AUDIO determines that any product is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such product. 4. What are the limits on ION AUDIO's liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETH…

Text truncated - open the document above for the full version.

PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date: 05/23/2012 Authority to Act as an Agent We declare that the following representative (agent) Name Jamy Yu Position Assistant Director Company Name Dongguan Dongdian Testing Service Co., Ltd. Address No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China 523808 Tel / Fax 0769-22891499-8609 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name Karaoke Pro Model Name iPA46 Brand Name ION We also authorize BZT – TCP Certification GmbH, Ms.Wanida Patthanavoj (address: Hermann - Loens - Weg 6, 15859 Storkow b. Berlin Germany) to process the application. Yours sincerely, Signatory Name David Gill Position Eng. Manager Company Name ION AUDIO, LLC Address 200 SCENIC VIEW DRIVE, SUITE 201, CUMBERLAND, RI 02864 U.S.A. Tel / Fax 401 658 3131 / 401 658 3640 In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE120030 Page 19 of 21 9. Photos of the EUT

Label size: 25x 7mm Label location

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE120030 Page 20 of 21 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE120030 Page 21 of 21 END OF REPORT

FCC PART 74H CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel: +86-0769-22891499 http://www.dgddt.com Report No: DDT-RE120030 Issued Date: May.23, 2012 Applicant : ION AUDIO,LLC Address : 200 SCENIC VIEW DRIVE, SUITE 201, RI02864, U.S.A. Equipment under Test : Karaoke Pro Model No : iPA46 Trade Mark : ION FCC ID : Y4O-IPA46TX Manufacturer : Integrity Electronic Co.,Ltd Address : NO. 68, Huanghe Rd., Fenghuanggang, Tangxia Township, Dongguan City, Guangdong Province, China Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-RE120030 Page 2 of 21 TABLE OF CONTENTS Test report declares......................................................................................................................3 1. Summary of test results ............................................................................................................... 5 2. General test information .............................................................................................................. 6 2.1. Description of EUT ..................................................................................................................... 6 2.2. Accessories of EUT..................................................................................................................... 6 2.3. Assistant equipment used for test ................................................................................................ 6 2.4. Block diagram of EUT configuration for test ............................................................................. 6 2.5. Test environment conditions ....................................................................................................... 6 2.6. Test laboratory............................................................................................................................. 7 2.7. Measurement uncertainty ............................................................................................................ 7 3. Carrier Output Power .................................................................................................................. 8 3.1. Test equipment ............................................................................................................................ 8 3.2. Block diagram of test setup ......................................................................................................... 8 3.3. Limits .......................................................................................................................................... 8 3.4. Test Procedure............................................................................................................................. 8 3.5. Test Result................................................................................................................................... 8 4. Modulation Characteristics ......................................................................................................... 9 4.1. Test equipment ............................................................................................................................ 9 4.2. Block diagram of test setup ......................................................................................................... 9 4.3. Limit ............................................................................................................................................ 9 4.4. Test Procedure............................................................................................................................. 9 4.5. Test result .................................................................................................................................... 9 5. Occupied Bandwidth ................................................................................................................. 11 5.1. Test equipment .......................................................................................................................... 11 5.2. Block diagram of test setup ....................................................................................................... 11 5.3. Limit .......................................................................................................................................... 11 5.4. Test Procedure........................................................................................................................... 11 3.1. Test result .................................................................................................................................. 11 6. Frequency Stability ................................................................................................................... 13 6.1. Test equipment .......................................................................................................................... 13 6.2. Block diagram of test setup ....................................................................................................... 13 6.3. Limit .......................................................................................................................................... 13 6.4. Test Procedure........................................................................................................................... 13 6.5. Test result .................................................................................................................................. 14 7. Radiated spurious emissions ..................................................................................................... 15 7.1. Test Equipment ......................................................................................................................... 15 Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-RE120030 Page 3 of…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE120030 Page 18 of 21 8. Test setup photograph