Y4O-NK31ORBITWireless MIDI Controller

User Guide English ( 3 – 5 ) Guía del usuario Español ( 6 – 8 ) Guide d'utilisation Français ( 9 – 11 ) Guida per l'uso Italiano ( 12 – 14 ) Benutzerhandbuch Deutsch ( 15 – 17 ) 3 User Guide (English) Box Contents • Orbit • Mini-USB Cable • Wireless USB Receiver • User Guide • Safety & Warranty Manual Product Registration & Support Take a minute to register your Orbit at www.numark.com. Registering it ensures that we can keep you updated with any new product developments and provide you with world-class technical support if you have any issues. Also, visit www.numark.com/orbit for the latest information about Orbit, including pre-made control mappings, a mapping editor, tutorial videos, and more. For additional product support, visit www.numark.com/support. Quickstart 1. Visit www.numark.com/orbit for free software or to download a control map for your existing software. The control map specifies which software commands Orbit will operate. You can also download the Orbit Editor, which lets you change what messages Orbit sends to your software. 2. Install and open the software you downloaded, or open your own MIDI-controllable software. 3. Connect the wireless USB receiver to your computer. 4. Power Orbit on (using the power switch on its underside). 5. In your software's Preferences or Settings, select Orbit as the hardware controller or device, and import the Orbit control map file into your software. 6. Step away from the computer—start using Orbit! For tips to ensure the best possible wireless reception and performance, see the Tips for Optimal Performance section of this manual. Charging and Power Usage To charge Orbit, use the included mini-USB cable to connect it to (A) your computer's USB port (with the computer powered on) or (B) a standard USB power adapter connected to a power source. (You can control your software with Orbit as it is charging.) The charge LED next to Orbit's mini-USB port will light up when it is charging and turn off when it is fully charged. It takes approximately 3 hours to charge Orbit's battery fully. You can use Orbit for approximately 8 hours with a fully charged battery. The 4 bank buttons will flash when Orbit's battery is low and needs to be charged again. After 5 minutes of inactivity, Orbit's power-save mode will activate, and Orbit will "go to sleep" to preserve its battery charge. Move Orbit again to "wake it up." 4 Features Top View Bottom View PAD BANK 2 3 4 1 K 2 K 3 K 4 K 1 1 6 6 5 5 1 2 3 4 ab 7 8 9 10 All of Orbit's controls are MIDI-mappable, so they can control any MIDI-assignable command in your software, giving you countless performance possibilities. Below are descriptions of the controls' general behavior. To download pre-made control mappings for your software—and an editor to create your own mappings—visit www.numark.com/orbit. 1. Pads: These 16 multicolor pads control various software commands as assigned in the MIDI mapping. Switch between the 4 banks (of 16 pads each) with the Pad Bank Selectors. You can assign different colors to these pads, as well. For more information, see the Selecting Colors for the Pads section of this manual. Note: The pads labeled "a" and "b" in the above diagram are used while pairing Orbit to the wireless USB receiver, if you ever need to re-establish the wireless connection. See the Pairing Orbit to the Wireless USB Receiver section of this manual for more information. 2. Pad Bank Selectors (1, 2, 3, 4): Use these buttons to switch between the 4 banks of Pads. The current Pad Bank Selector will light up. These buttons flash to indicate Orbit's battery is low. When this happens, connect Orbit's mini-USB port to your computer with a mini-USB cable. 3. Virtual Knob: This wheel adjusts various software features as assigned in the MIDI mapping. Switch between the 4 functions with the Virtual Knob Selectors. 4. Virtual Knob Selectors (K1, K2, K3, K4): Use these buttons to switch between the 4 functions of the Virtual Knobs: • K1, K2, and K3: The Virtual Knob acts as a 270° knob—ideal for mapping to knobs controlling filters, EQs, effects parameters, etc.). • K4: The Virtual Knob acts as a 360° encoder for scrolling through your music library or acting as a virtual platter (so you can search through the current track, scratch, or pitch-bend). 5. Shoulder Buttons: Hold down either or both of these buttons to activate Orbit's accelerometer, and then tilt Orbit to affect it. The left shoulder button activates the accelerometer on the left-right axis. The right shoulder button activates the accelerometer on the forward-back axis. The Pad LEDs will "stream" in the directions it detects, and the streams will get faster as the tilt increases. Tip: You can "latch" a shoulder button in the "on" position by double-pressing it. Return it to its default "momentary" behavior by pressing it once. 6. Hooks: Attach a lanyard to these hooks to hang Orbit from your neck. 7. Strap Attachment: Unscrew the strap attachment and loop Orbit over an armband or belt, and then re- tighten the strap attachment. 8. Charging LED: This light will turn on when Orbit's internal lithium-ion battery is charging and turn off when it is fully charged. See the Charging and Power Usage section of this manual for more information about charging Orbit. 9. Mini-USB Port: Use the mini-USB cable to connect this port to a USB port on your computer. This connection charges Orbit's internal lithium-ion battery (whether Orbit is powered on or not). It also allows you to use Orbit "wired" instead of wirelessly. 10. Power Switch: Flip this switch to power Orbit on or off. 5 Selecting Colors for the Pads You can select the color of the light for each pad in each bank, allowing you to color-code your pads or banks to distinguish between their different functions in your software. To select a color for a pad: 1. Press and hold down any Pad Bank Selector, and then press either shoulder button. The Virtual Knob Selectors will flash to indicate Orbit is in Color …

Text truncated - open the document above for the full version.

inMusic Brands, Inc. inMusic is the exclusive distributor of SoniVox. Date: 2013-01-15 Authority to Act as an Agent We declare that the following representative (agent) Name Jamy Yu Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-22891499 fax:+86-0769-22895596 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to EMCCert DR. RAŠEK GmbH for product certification. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Agency Agreement Expiration Date: __1 year____ Yours sincerely, Signatory Name David Gill Position Engineering Manager Company Name inMusic Brands,Inc Address 200 SCENIC VIEW DRIVE, SUITE 201,CUMBERLAND RI 02864, U.S.A. Tel / Fax 401-658-5760 / 401-658-3640 E-Mail [email protected]

inMusic Brands, Inc. inMusic is the exclusive distributor of SoniVox. Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Date: 2013-01-15 Company name: inMusic Brands,Inc FCC ID: Y4O-NK31ORBIT FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 we hereby requests permanent confidentiality of the following documents for the subject application: Exhibit Type Description ☒ Schematics All circuitry of devices and component values ☒ Block Diagrams Details of device showing the frequency of all oscillators ☐ Bill Of Materials Parts list of the product for the radio device ☒ Operational Description Description of the circuit functions Note: Exhibit types that are commonly held confidential are: (1) Schematics, (2) Block Diagrams, (3) Bill Of Materials, (4) Operational Descriptions. Any exhibit NOT granted confidentiality is viewable on the FCC website as soon as a grant is issued. These documents contain detailed system and equipment description and related information about the product which we considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, we consider that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours sincerely, Signatory Name David Gill Position Engineering Manager Company Name inMusic Brands, Inc Address 200 Scenic View Drive, Suite 201 Cumberland, RI 02864, U.S.A. Tel / Fax 401-658-5760 / 401-658-3640 E-Mail [email protected]

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 27 of 33 8. Photos of the EUT Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 28 of 33 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 29 of 33

Please NOTE: The sticker should be placed in a slight recess in the Plastic Housing

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 30 of 33 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 31 of 33 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 32 of 33 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130016 Page 33 of 33 END OF REPORT

Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-RE130017 Page 1 of 23 FCC CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel: +86-0769-22891499 http://www.dgddt.com Applicant : inMusic Brands,Inc Address : 200 SCENIC VIEW DRIVE, SUITE 201, RI02864, U.S.A. Equipment under Test : Wireless MIDI Controller Model No : Orbit Trademark : Numark FCC ID : Y4O-NK31ORBIT Manufacturer : Dong Guan Integrity Electronic Co.,Ltd Address : NO. 68, Huanghe Rd., Fenghuanggang, Tangxia Township, Dongguan City, Guangdong Province, China Report No: DDT-RE130017 Issued Date: 2013/01/18 Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-RE130017 Page 2 of 23 TABLE OF CONTENTS Test report declares......................................................................................................................3 1. Summary of test results ............................................................................................................... 4 2. General test information .............................................................................................................. 5 2.1. Description of EUT ..................................................................................................................... 5 2.2. Accessories of EUT..................................................................................................................... 5 2.3. Assistant equipment used for test ................................................................................................ 5 2.4. Block diagram of EUT configuration for test ............................................................................. 5 2.5. Test environment conditions ....................................................................................................... 6 2.6. Test laboratory............................................................................................................................. 6 2.7. Measurement uncertainty ............................................................................................................ 6 3. Power Line Conducted Emission Test ........................................................................................ 7 3.1. Test equipment ............................................................................................................................ 7 3.2. Block diagram of test setup ......................................................................................................... 7 3.3. Power Line Conducted Emission Limits(Class B) ...................................................................... 7 3.4. Test Procedure............................................................................................................................. 7 3.5. Test Result................................................................................................................................... 8 4. Radiated emission test ............................................................................................................... 11 4.1. Test equipment .......................................................................................................................... 11 4.2. Block diagram of test setup ....................................................................................................... 11 4.3. Radiated emission limit(Class B) .............................................................................................. 11 4.4. Test Procedure........................................................................................................................... 12 4.5. Test result .................................................................................................................................. 12 5. Test setup photograph ............................................................................................................... 15 6. Photos of the EUT ..................................................................................................................... 17 Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-RE130017 Page 3 of 23 TEST REPORT DECLARE Test Standard Used: FCC Rules and Regulations Part 15 Subpart B: 2012 Test procedure used: ANSI C63.4:2009 We Declare: The equipment described above is tested by Dongguan Dongdian Testing Service Co., Ltd and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and Dongguan Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these tests. After test and evaluation, our opinion is that the equipment provided for test compliance with the requirement of the above FCC standards. Report No: DDT-RE130017 Date of Test: 2013/01/17---2013/01/17Date of Report: 2013/01/18 Prepared By: Approved By: ________________ _____________________ Leo Liu/Engineer Jamy Yu/EMC Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan Dongdian Testing Service Co., Ltd. Applicant : inMusic Brands,Inc Address : 200 SCENIC VIEW DRIVE, SUITE 201, RI02864, U.S.A. Equipment under Test : Wireless MIDI Controller Model No : Orbit Trademark : Numark FCC ID : Y4O-NK31ORBIT Manufacturer : Dong Guan Integrity Electronic Co.,Ltd Address : NO. 68, Huanghe Rd., Fenghuanggang, Tangxia Township, Dongguan City, Guangdong Province, China Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-RE130017 Page 4 of 23 1. Summary of test results EMISSION Description of Test Item StandardResults Power Line Conducted Emission Test FCC Part 15: 2012 ANSI C63.4: 2009 PASS Radiated Emission Test FCC Part 15: 2012 ANSI C63.4: 2009 PASS Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-R…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130017 Page 15 of 23 5. Test setup photograph Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-RE130017 Page 16 of 23