Y4O-TCL2Compact Performance PA System

Important Safety Instructions & Warranty Information English ( 3 – 7 ) Instrucciones importantes de seguridad e información de la garantía Español ( 8 – 11 ) Instructions importantes de sécurité et informations de garantie Français ( 12 – 15 ) Istruzioni importanti di sicurezza e le informazioni della garanzia Italiano ( 16 – 19 ) Wichtige sicherheitsanweisungen und garantieinformationen Deutsch ( 20 – 23 ) 3 Product Warranty (purchases made in USA) 1. What is covered and for how long? All Products: inMusic Brands, Inc. (“inMusic”) warrants to the original purchaser that Alto Professional (“Alto Pro”) products and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized Alto Pro dealer and continuing for the following period of time after that date for one (1) year. inMusic warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable. 2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover: • Damage caused by improper installation or improper connection to any peripheral • Damage caused by an external electrical fault • Damage from use of parts not manufactured or sold by Alto Pro • Product purchased from anyone other than an Alto Pro authorized dealer • Modifications to product not approved in writing by Alto Pro • Equipment that has the serial number removed or made illegible • Normal cosmetic and mechanical wear • Damage or loss during transit to an Authorized Alto Pro Repair Center • Units that are purchased and/or located outside of the continental USA 3. What are inMusic’s obligations? During the applicable warranty period, Alto Pro will repair or replace, at Alto Pro’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, purchaser must first contact Alto Pro and obtain a return authorization number (“RA#”). Purchaser must then return the product to Alto Pro in an adequate container for shipping, accompanied by purchaser’s sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller’s name and address. To obtain an RA# and assistance on where to return the product, contact Alto Pro customer service at 401-658-8135. Upon receipt, Alto Pro will repair or replace the defective products. Alto Pro may, at Alto Pro’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All replaced parts, components, boards, and equipment become the property of Alto Pro. If Alto Pro determines that any product is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such product. 4. What are the limits on inMusic’s liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ALTO PRO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, INMUSIC OR ALTO PRO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ALTO PRO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO INMUSIC’S OR ALTO PRO’S OWN NEGLIGENCE, EVEN IF INMUSIC, ALTO PRO, OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ALTO PRO PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. This Limited Warranty allocates risk of product failure between purchaser and Alto Pro, and Alto Pro’s product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of Alto Pro are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on Alto Pro or inMusic. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by Alto Pro or inMusic and should not be relied upon. 5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another. 4 Product Warranty (purchases not made in USA) 1. inMusic Brands, Inc. (“inMusic”) warrants to the original purchaser that Alto Professional (“Alto Pro”) products are free from defects in material and workmanship under normal use and service for the period commencing upon the …

Text truncated - open the document above for the full version.

)&&,'<27&/

Control interface of Spectrum PA Control interface of TROUPER

label size: 170mm x 30mm

Internal photos of Spectrum PA Internal photos of TROUPER

1 INTERTEK TESTING SERVICES Analysis Report The equipment under test (EUT) is a Compact Performance PA System with Bluetooth operating 2402-2480MHz. T he EUT can be powered by AC 100V, 110-120V, 220-240V, 50/60Hz. For more detailed features description, please refer to the user’s manual. Modulation Type: GFSK, ∏/4DQPSK, 8DPSK An tenna Type: Integral antenna (Gain: 2 dBi) The nominal radiated output power (e.i.r.p) specified: 5dBm (Tolerance: +/-3dB) The nominal conducted output power specified: 3dBm (Tolerance: +/-3dB) According to the KDB 447498: T he maximum radiated emission for the EUT is 99.8dBμV/m at 3m = [(FS*D) ^2 / 30] mW = 4.6dBm which is within the production variation The maximun conducted output power specified is 6dBm = 4.0mW The source- based time-averaging conducted output power = 4.0 * Duty cycle mW <= 4.0 mW (Duty Cycle<=100%) The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.5 mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. FCC ID: Y4O-TCL2

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_TX_b Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com inMusic Brands, Inc. Application For Certification FCC ID: Y4O-TCL2 Compact Performance PA System Model: Spectrum PA Additional Model: TROUPER 2.4GHz Transceiver Report No.: 150305008SZN-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-13] Prepared and Checked by: Approved by: Sign on file Hardy Suo Engineer Andy Yan Senior Project Engineer Date: March 20, 2015 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: Y4O-TCL2 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: Y4O-TCL2 ii MEASUREMENT/TECHNICAL REPORT inMusic Brands, Inc. Model: Spectrum PA Additional Model: TROUPER FCC ID: Y4O-TCL2 This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-13 Edition] provision. Report prepared by: Hardy Suo Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8614 0743 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: Y4O-TCL2 iii Table of Contents 1.0 General Description ................................................................................................. 2 1.1 Product Description ................................................................................................. 2 1.2 Related Submittal(s) Grants .................................................................................... 2 1.3 Test Methodology .................................................................................................... 2 1.4 Test Facility ............................................................................................................ 3 2.0 System Test Configuration ...................................................................................... 5 2.1 Justification ............................................................................................................. 5 2.2 EUT Exercising Software ......................................................................................... 5 2.3 Special Accessories ................................................................................................ 5 No special accessories used. ....................................................................................... 5 2.4 Equipment Modification ........................................................................................... 5 2.5 Measurement Uncertainty ....................................................................................... 6 2.6 Support Equipment List and Description .................................................................. 6 3.0 Emission Results ..................................................................................................... 8 3.1 Radiated Test Results ............................................................................................. 9 3.1.1 Field Strength Calculation ..................................................................................... 9 3.1.2 Radiated Emission Configuration Photograph ..................................................... 10 3.1.3 Radiated Emissions ............................................................................................ 10 3.1.4 Transmitter Spurious Emissions ......................................................................... 13 3.2 Conducted Emission at Mains Termina .................................................................. 17 3.2.1 Conducted Emissions Configuration Photograph ................................................ 17 3.2.2 Conducted Emissions ........................................................................…

Text truncated - open the document above for the full version.