Y92-BF0001Buffalo Filter Limited Module RFID System

BUFFALO FILTER® Page 1 of 17 Operator’s Manual RFID Limited Modular Components © 2010 BUFFALO FILTER ® 595 Commerce Drive Buffalo, New York USA 14228 (716) 835-7000 or (716) 835-3414 fax Division of Medtek Devices, Inc. Customer Service: 800-343-2324 (U.S. Only) – www.buffalofilter.com 1-716-835-7000 (International) BUFFALO FILTER® Page 2 of 17 Limited Warranty For a period of one (1) year following the date of delivery, BUFFALO FILTER warrants the BF0001 against any defects in material or workmanship. BUFFALO FILTER will repair or replace (at BUFFALO FILTER’S option) the same without charge, provided that routine maintenance as specified in this manual has been performed using replacement parts approved by BUFFALO FILTER. This warranty is void if the product is used in a manner or for purposes other than intended.    2010 BUFFALO FILTER ® Buffalo, New York USA 14228 (716) 835-7000 www.buffalofilter.com Division of Medtek Devices, Inc. Customer Service: 800-343-2324 (U.S. Only) 1-716-835-7000 (International) The revision level of this manual is specified by the highest revision letter found on either the inside front cover or enclosed errata pages (if any). Manual Number BF0001 MEDICAL EQUIPMENT WITH RESPECT TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL 60601-1 AND CAN/CSA C22.2 NO. 601.1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. 9D93 BUFFALO FILTER® Page 3 of 17 1.1 Introduction This manual gives information on the proper installation of the RFID modules into a Smoke Evacuation system by BUFFALO FILTER ® or an OEM integrator (per agreement with BUFFALO FILTER ® ). This installation should only be performed by qualified technical personal, after understanding the information contained in this manual. 1.2 Inspection The RFID modules and required control and power circuits have has been thoroughly tested and inspected before shipment from the factory. Please check the components before using it to insure that no damage has occurred in transit. If damage is evident, please contact BUFFALO FILTER Customer Service at 1-800-343-2324 (US Only) or (716) 835-7000 (International) In addition, please compare the accessories you receive with the standard accessories list below. If an item is missing, please notify BUFFALO FILTER Customer Service. Standard Accessories: • Operator’s Manual • Low and High Voltage control printed circuit boards • Power Cord • All required interconnecting wiring harnesses System Description Section 1.0 BUFFALO FILTER® Page 4 of 17 1.3 Operational Information The operational information contained in this section is intended for the customer review of regulatory issues. The information pertains to the use of the products both domestically and internationally: 1. The BUFFALO FILTER Smoke Evacuation System(s) complies with IEC60601.1 electrical specifications in the following systems: 100/120 VAC 50/60 Hz, 220/240 VAC 50/60 Hz 2. Mode of operation (UL 60601-1, Clause 5.6): Continuous 3. Upon request, BUFFALO FILTER will provide the following: Service and Repair Instructions, including Circuit Diagrams and Parts List 4. The fuses on the circuit board are to be serviced by an authorized BUFFALO FILTER technician as follows: 100/120 VAC, 50/60 Hz use 10 Amp 250 Volt Fuse (Slo-Blo) 220/240 VAC, 50/60 Hz use 8 Amp 250 Volt Fuse (Slo-blo) 5. This equipment utilizes mobile RF communications equipment that can affect medical electrical equipment. 6. FCC Compliance Statements: • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/ TV technician for help. BUFFALO FILTER® Page 5 of 17 7. Industry Canada Notices: • Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. • This radio transmitter (IC: 9532A-BF0001) has been approved by Industry Canada to operate with the 49” wire loop antenna included with this module with the maximum permissible gain and required antenna impedance for each antenna type indicated. Other antennas, or antenna types not included, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. • This device complies with Industry Canada licence-…

Text truncated - open the document above for the full version.

Mar. 27, 2011 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Limited Modular Approval Certification Application Testing under FCC Part 15, Subpart C - Unlicensed Low Power Transmitter operating in the frequency band 13.110-14.010 MHz. Product: Buffalo Filter Limited Module RFID System Model No.: BF0001 FCC ID: Y92-BF0001 Dear Sir/Madam: As appointed agent for Buffalo Filter, we submit the application for equipment certification of the above product. Please review all required documents uploaded to your E-Filing Site. Note: This application is subject to limited modular approval; see Applicant’s cover letter requesting for limited modular approval. If you have any queries, please do not hesitate to contact us. Yours truly, Dharmajit Solanki Dharmajit Solanki, Authorized Agent UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Custom Loop Antenna

Buffalo Filter Limited Module RFID System Model No.: BF0001 FCC ID: Y92-BF0001 Applicant: Buffalo Filter 595 Commerce Drive Buffalo, NY 14228 USA In Accordance With Federal Communications Commission (FCC) Part 15, Subpart C Unlicensed Low Power Transmitter Operating in the Band 13.110-14.010 MHz UltraTech's File No.: BUF-005_F15C225 This Test report is Issued under the Authority of Tri M. Luu, B.A.Sc, Vice President of Engineering UltraTech Group of Labs Date: Mar. 27, 2011 Report Prepared by: Dharmajit Solanki Issued Date: Mar. 27, 2011 Tested by: Hung Trinh, EMC/RFI Technician Test Dates: Mar. 23-25, 2011  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] FCC Korea KCC-RRL 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Part 15, Subpart C, Section 15.225 – Unlicensed Low Power Transmitter Buffalo Filter Limited Module RFID System, Model: BF0001 FCC ID: Y92-BF0001 ULTRATECH GROUP OF LABS File #: BUF-005_F15C225 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Mar. 27, 2011 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ............................................................................................................................................................1 1.1. SCOPE ............................................................................................................................................................................................1 1.2. RELATED SUBMITTAL(S)/GRANT(S).......................................................................................................................................1 1.3. NORMATIVE REFERENCES .......................................................................................................................................................1 EXHIBIT 2. PERFORMANCE ASSESSMENT .................................................................................................................................2 2.1. CLIENT INFORMATION ..............................................................................................................................................................2 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION.................................................................................................................2 2.3. EUT’S TECHNICAL SPECIFICATIONS......................................................................................................................................3 2.4. LIST OF EUT’S PORTS.................................................................................................................................................................3 2.5. ANCILLARY EQUIPMENT ..........................................................................................................................................................3 2.6. GENERAL TEST SETUP BLOCK DIAGRAM ............................................................................................................................4 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS...................................................5 3.1. CLIMATE TEST CONDITIONS ...................................................................................................................................................5 3.2. OPEPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS ............................................................................5 EXHIBIT 4. SUMMARY OF TEST RESULTS..................................................................................................................................6 4.1. LOCATION OF TESTS..................................................................................................................................................................6 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS ..................................................................................6 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES............................................................6 EXHIBIT 5. TEST MEASUREMENT DATA.....................................................................................................................................7 5.1. COMPLIANCE WITH FCC PART 15 – GENERAL TECHNICAL REQUIREMENTS ..............................................................7 5.2. OCCUPIED BANDWIDTH............................................................................................................................................................8 5.3. FIELD STRENGTH OF EMISSIONS INSIDE & OUTSIDE THE PERMITTED BAND 13.110-14.010 MHz [47 CFR 15.225 (a) to (d)] & 15.109, 15.209................................................................................................................................ 10 5.4. FREQUENCY STABILITY [47 CFR 15.225(e)] ......................................................................................................................... 13 5.5. POWERLINE CONDUCTED EMISSIONS [47 CFR 15.107(a) & 15.207] ................................................................. ............... 14 EXHIBIT 6. TEST EQUIPMENT LIST ............................................................................................................................................ 17 EXHIBIT 7. MEASUREMENT UNCERTAINTY...................................................................…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 1 Power Line Conducted Emissions ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 2 Power Line Conducted Emissions ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 3 Radiated Emissions at 10 m Distance (for fre quencies below 30 MHz) – Orthogonal Position #1 ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 4 Radiated Emissions at 10 m Distance (for fre quencies below 30 MHz) – Orthogonal Position #2 ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 5 Radiated Emissions at 10 m Distance (for fre quencies below 30 MHz) – Orthogonal Position #3 ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 6 Radiated Emissions at 3 m Distance (for frequenc ies at or above 30 MHz) – Orthogonal Position #1 ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 7 Radiated Emissions at 3 m Distance (for above 1 GHz) – Orthogonal Position #2 ANNEX 1 - TEST SETUP PHOTOGRAPHS Buffalo Filter Buffalo Filter Limited Module RFID System, Model BF0001 FCC ID: Y92-BF0001 IC: 9532A-BF0001 A1 - 8 Radiated Emissions at 3 m Distance (for above 1 GHz) - – Orthogonal Position #2