Y9ZMT401050BPELTOR LiteCom Pro II headset

3M Personal Safety Division 3M Center, Building 235-2NW-70 St. Paul, MN 55144-1000 www.3M.com/Peltor 3M Technical Support USA Canada 1-800-665-2942 www.3M.com/patent 1-855-484-3093 [email protected] [email protected] FP3771 rev a Copyright © 3M 2015. All rights reserved. 3M™ PELTOR™ LiteCom Pro II Headsets are made in Sweden by 3M Svenska AB, SE-331 02, Värnamo, Sweden. 3M and PELTOR are trademarks of 3M Company, St. Paul, MN 55144-1000, USA. Used under license in Canada. Please recycle. Printed in Sweden. USA Canada MT7H7F4010-NA-50 MT7H7F4010-CA-50 MT7H7B4010-NA-50 MT7H7B4010-CA-50 MT7H7P3E4010-NA-50 MT7H7P3E4010-CA-50 PELTOR™ LiteCom Pro II Headset The Sound Solution Two-way Radio Headset Orejera con radio de dos vías Headset radio bidirectionnel The Sound Solution (A) (A:18) (A:17) (A:16) (A:9) (A:12) (A:13) (A:6) (A:1) (A:2) (A :11) (A:3) (A:4) (A:5) (A:8) (A:14) (A:10) (A:15) (A:7) (E) (F) (G) E:1 F:1 G:1 E:2 F:2 G:2 G:3 C:1 (B) (C) B:1B:2 C:2 B:3 C:3 B:4 C:4 C:5C:6 (D) D:1D:2D:3 USACanada LiteCom Pro II Channel Frequency (MHz) Type Requires FCC License? TypeRequires IC License? 1462,5625FRS 1/GMRS 9No FRS 1/GMRS 2 No 2462,5875FRS 2/GMRS 10 No FRS 2/GMRS 4 No 3462,6125FRS 3/GMRS 11No FRS 3/GMRS 6 No 4462,6375FRS 4/GMRS 12 No FRS 4/GMRS 8 No 5462,6625FRS 5/GMRS 13No FRS 5/GMRS 10 No 6462,6875FRS 6/GMRS 14No FRS 6/GMRS 12 No 7462,7125FRS 7/GMRS 15No FRS 7/GMRS 14 No 8467,5625FRS 8 No FRS 8 No 9467,5875FRS 9 No FRS 9 No 10467,6125FRS 10 No FRS 10 No 11467,6375FRS 11 No FRS 11 No 12467,6625FRS 12 No FRS 12 No 13467,6875FRS 13 No FRS 13 No 14467,7125FRS 14 No FRS 14 No 15462,5500GMRS 1Ye s GMRS 1 No 16462,5750GMRS 2Ye s GMRS 3 No 17462,6000GMRS 3Ye s GMRS 5 No 18462,6250GMRS 4Ye s GMRS 7 No 19462,6500GMRS 5Ye s GMRS 9 No 20462,6750GMRS 6Ye s GMRS 11 No 21462,7000GMRS 7Ye s GMRS 13 No 22462,7250GMRS 8Ye s GMRS 15 No 23464,5000 PLMR 1Ye s Not Applicable Not Applicable 24464,5500 PLMR 2Ye s Not ApplicableNot Applicable 25467,7625 PLMR 3Ye s Not ApplicableNot Applicable 26467,8125 PLMR 4Ye s Not ApplicableNot Applicable 27467,8500 PLMR 5Ye s Not ApplicableNot Applicable 28467,8750 PLMR 6Ye s Not ApplicableNot Applicable 29467,9000 PLMR 7Ye s Not ApplicableNot Applicable 30467,9250 PLMR 8Ye s Not ApplicableNot Applicable (H) ANSI S3.19-1974 per USA EPA (I) Radio Channel Frequencies NOTE: • Canadian models only have 1-22 channels preprogrammed into the headset • USA models have all 1-30 channels preprogrammed into the headset Frequency [Hz] H1 125250500100020003150400063008000NRRCSA Class Headband: MT7H7F4010-NA-50 MT7H7F4010-CA-50 Mean Attenuation [dB] H2 17.823.032.136.235.139.038.738.336.525 dBA Standard Deviation [dB] H3 4.43.22.83.02.43.83.03.53.9 Neckband: MT7H7B4010-NA-50 MT7H7B4010-CA-50 Mean Attenuation [dB] H2 18.925.935.237.034.940.639.939.739.726 dBA Standard Deviation [dB] H3 5.23.23.32.92.53.63.02.32.5 Hard hat attachment: MT7H7P3E4010-NA-50 MT7H7P3E4010-CA-50 Mean Attenuation [dB] H2 19.424.333.635.534.138.538.035.835.725 dBA Standard Deviation [dB] H3 3.43.33.81.72.63.63.15.45.4 (J) Continuous Tone Coded Squelch System (CTCSS) (K) Digital Coded Squelch (DCS) 1. 67 08. 88.515. 110.922. 141.329. 179.926. 233.6 2. 71.99. 91.516. 114.823. 146.230. 186.237. 241.8 3. 74.410. 94.817. 118.824. 151.431. 192.838. 250.3 4. 77.011. 97.418. 123.025. 156.732. 203.5 5.79.712. 100.019. 127.326. 162.233. 210.9 6. 82.513. 103.520. 131.827. 167.934. 218.1 7.85.414. 107.221. 136.528. 173.835. 225.7 39. 02353. 11467. 17481. 31595. 445109. 631 40. 02554. 11568. 20582. 33196. 464110. 632 41. 02655. 11669. 22383. 34397. 465111. 654 42. 03156. 12570. 22684. 34698. 466112. 662 43. 03257. 13171. 24385. 35199. 503113. 664 44. 04358. 13272. 24486. 364100. 506114. 703 45. 04759. 13473. 24587. 365101. 516115. 712 46. 05160. 14374. 25188. 371102. 532116. 723 47. 05461. 15275. 26189. 411103. 546117. 731 48. 06562. 15576. 26390. 412 104. 565118. 732 49. 07163. 15677. 26591. 413105. 606119. 734 50. 07264. 16278. 27192. 423106. 612120. 743 51. 07365. 16579. 30693. 431107. 624121. 754 52. 07466. 172 80. 31194. 432108. 627 3M™ PELTOR™ LiteCom Pro II Headset EN Programmable Built-in Two-way Communication Headset 1-4 ES Orejera con comunicación de dos vías programable FR Headset de communication bidirectionnel intégré programmable 1 EN Important Safety Information Please read, understand, and follow all safety information in these instructions prior to using the 3M™ PELTOR™ LiteCom Pro II Headset. Retain these instructions for future reference. You have purchased a two way radio that operates using GMRS and Part 90 frequencies for use within the United States. In the US, the Federal Communications Commission (FCC) requires that you register for a GMRS/Part 90 license, and requires that anyone operating a device on the General Mobile Radio Service (GMRS) and Part 90 obtain a license prior to use. You can contact your 3M™ PELTOR™ authorized dealer or if dealer is not available in your area you can also apply for a GMRS/Part 90 license online at FCC Universal License System (ULS) web site (http://wireless.fcc.gov/uls/) WARNING: SPECIAL CONDITIONS FOR INSTRICALLY SAFE USE The user is responsible for ensuring that the 3M™ PELTOR™ LiteCom Pro II Headset and Accessories are used according to the applicable regulations in explosive environments. • Substitution of components will nullify the intrinsically safe design. • Do not use the headsets or accessories in potentially explosive environments if they appear broken or otherwise damaged. • Only use the 3M™ PELTOR™ ACK08 Battery, and only use the 3M™ PELTOR Power Supply (FR08) and Charger Cable (AL2AH) to charge the battery. • Only change or charge the battery in a nonhazardous location. RF Exposure Statement: The headset antenna must be operated to provide a separation distance of at least 4cm from the head and must not be co- located or operating in conjunction with any other antenna or transmitter. WARNING: • If the information and recommendations contained h…

Text truncated - open the document above for the full version.

Company name: 3M Company Add: Personal Safety Division, 3M Center, Building 235-2NW-70,，St. Paul,，Minnesota,，United States Tel: + 651-778-6336 Fax: +651-778-6336 Product Similarity Declaration October 10, 2015 To Whom It May Concern, We, 3M Company , hereby declare that we have a product named as PELTOR™ LiteCom Pro II headset (Model number: MT7H7F4010-NA-50) was tested by BACL, meanwhile, for our marketing purpose, we would like to list a series models (MT7H7B4010-NA-50; MT7H7P3E4010-NA-50), on reports and certificate, all the models are identical schematics, only named differently. No other changes are made to them We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature: Yuriy Litvinov Lead EMC Engineer

Company name: 3M Company Tel: + 651-778-6336 FCC Confidential Authorization October 10, 2015 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: Y9ZMT401050B In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (3M Company ) hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • Parts List/Tune up procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Yuriy Litvinov Lead EMC Engineer Fax: +651-778-6336 Add: Personal Safety Division, 3M Center, Building 235-2NW-70,，St. Paul,，Minnesota,，United States

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – Front View EUT – Rear View EUT – Top View EUT – Bottom View EUT – Left Side View EUT – Right Side View

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT –Cover off View 1 EUT –Cover off View 2 EUT –Left Main Board #1 View EUT –Left Main Board #2 View EUT –Left Main Board #3 View EUT –Right Main Board #1 View EUT –Right Main Board #2 View EUT –Right Main Board #3 View EUT –Right Main Board #4 View EUT –Right Main Board #5 View EUT – Battery Front View EUT – Battery Back View EUT –Battery Label View

Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. FCC PART 95 MEASUREMENT AND TEST REPORT For 3M Company Personal Safety Division,3M Center, Building 235-2NW-70,St. Paul,Minnesota,United States FCC ID: Y9ZMT401050B Report Type: Original Report Product Type: PELTOR™ LiteCom Pro II headset Test Engineer: William Li Report Number: RSZ150720007-00A Report Date: 2015-08-14 Reviewed By: Jimmy Xiao RF En gineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ150720007-00A FCC Part 95 Page 2 of 7 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 TEST FACILITY ............................................................................................................................................................. 3 SYSTEM TEST CONFIGURATION .......................................................................................................................... 4 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 4 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 4 SUMMARY OF TEST RESULTS ............................................................................................................................... 5 FCC §1.1307(b) & §2.1093 - RF EXPOSURE ............................................................................................................. 6 PRODUCT SIMILARITY DECLARATION LETTER ............................................................................................ 7 BELOW IS THE ORIGINAL REPORT (Appendix A) ............................................................................................. 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ150720007-00A FCC Part 95 Page 3 of 7 GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The 3M Company ’s product, model number: MT7H7F4010-NA-50 (FCC ID: Y9ZMT401050B ) or the "EUT" in this report was a PELTOR™ LiteCom Pro II headset , which was measured approximately: 26cm (L)×14cm (W)×9.8 cm (H), rated input voltage: DC 3.7 V battery. Note: the product, series model MT7H7B4010-NA-50;MT7H7P3E4010-NA-50 and MT7H7F4010-NA-50 ,the model MT7H7F4010-NA-50 was selected for fully testing; the detailed information can be referred to the attached declaration which was stated and guaranteed by the applicant. * All measurement and test data in this report was gathered from production sample serial number: 1505765 (Assigned by BACL, Shenzhen). The EUT supplied by the applicant was received on 2015-07-20. Objective This report is prepared on behalf of 3M Company in accordance with Part 2 and Part 95, Subpart A & Subpart B & Subpart E of the Federal Communication Commissions rules. Related Submittal(s)/Grant(s) FCC Part 90 TNE submission with FCC ID: Y9ZMT401050B. Test Methodology All tests and measurements indicated in this document were performed in accordance with Part 95 Subpart A, B and Subpart E of the Federal Communication Commissions rules with TIA-603-D, Land Mobile FM or PM-Communications Equipment-Measurement and Performance Standards. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on October 31, 2013. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2014. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ150720007-00A FCC Part 95 Page 4 of 7 SYSTEM TEST CONFIGURATION Description of Test Configuration The system was configured for testing in a typical fashion (as normally used by a typical user). Equipment Modifications No modification was made to the EUT tested. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ150720007-00A FCC Part 95 Page 5 of 7 SUMMARY OF TEST RESULTS FCC Rules Description of Test Results §1.1307(b) (1) ,§2.1093 RF Exposure Info Compliance §2.…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions – Front View (Below 1 GHz) Radiated Emissions – Front View (Above 1 GHz)