YDUVMTB533Cruz Tablet

ADVANCED MULTI TECH PTE. LTD Date: 2010-9-27 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms Cathy Wang of Neutron Engineering Inc. and hereafter referred to as Neutron, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms Cathy Wang of Neutron Engineering Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Neutron as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

Neutron Engineering Inc. Project No.: 1009C186 Page 2 of 18 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 3 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 3 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 4 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 4 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 5 of 18 1009C186 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 5 of 18 1009C186 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 6 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 6 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 7 of 18 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 8 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 8 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 9 of 18 1009C186

Neutron Engineering Inc. Project No.: 1009C186 Page 10 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 10 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 11 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 11 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 12 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 12 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 13 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 13 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 14 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 14 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 15 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 15 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 16 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 16 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 17 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 17 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 18 of 18 1009C186 1009C186 Neutron Engineering Inc. Project No.: 1009C186 Page 18 of 18 1009C186 1009C186

Report No.: RZA2010-1496 TESTING No. L2264 OET 65 TEST REPORT Product Name Cruz Tablet Model Cruz Tablet T103, Cruz Tablet T105, Cruz Tablet T104 FCC ID YDUVMTB533 Client ADVANCED MULTI TECH PTE. LTD TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name Cruz Tablet Model Cruz Tablet T103, Cruz Tablet T105, Cruz Tablet T104 FCC ID YDUVMTB533 Report No. RZA2010-1496 Client ADVANCED MULTI TECH PTE. LTD Manufacturer ADVANCED MULTI TECH PTE. LTD Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radiofrequency Electromagnetic Fields, 3 KHz to 300 GHz. OET Bulletin 65 supplement C, published June 2001 including DA 02-1438, published June 2002: Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits. Transition Period for the Phantom Requirements of Supplement C to OET Bulletin 65. KDB 248227 D01 SAR meas for 802 11 a b g v01r02: SAR Measurement Procedures for 802.11a/b/g Transmitters KDB 616217 D03 SAR Supp Note and Netbook Laptop v01: SAR Evaluation Considerations for Laptop/Notebook/Netbook and Tablet Computers - supplement to KDB 616217. KDB 447498 D01 Mobile Portable RF Exposure v04: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: October 1 st , 2010 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Xue Chaofeng TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1496 Page 3of 66 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the test report.........................................................................................................5 1.2. Testing laboratory .................................................................................................................5 1.3. Applicant Information ............................................................................................................6 1.4. Manufacturer Information ......................................................................................................6 1.5. Information of EUT................................................................................................................7 1.6. The Maximum SAR 1g Values and Conducted Power of each tested band ...........................8 1.7. Test Date ..............................................................................................................................8 2. Operational Conditions during Test ..............................................................................................9 2.1. General description of test procedures .................................................................................9 2.2. Position of module in Portable devices ...............................................................................10 3. SAR Measurements System Configuration ................................................................................ 11 3.1. SAR Measurement Set-up .................................................................................................. 11 3.2. DASY5 E-field Probe System .............................................................................................12 3.2.1. EX3DV4 Probe Specification .......................................................................................12 3.2.2. E-field Probe Calibration ..............................................................................................13 3.3. Other Test Equipment .........................................................................................................13 3.3.1. Device Holder for Transmitters ....................................................................................13 3.3.2. Phantom......................................................................................................................14 3.4. Scanning procedure............................................................................................................14 3.5. Data Storage and Evaluation ..............................................................................................16 3.5.1. Data Storage................................................................................................................16 3.5.2. Data Evaluation by SEMCAD ......................................................................................16 3.6. System check......................................................................................................................19 3.7. Equivalent Tissues ..............................................................................................................20 4. Laboratory Environment............................................................................................................. 20 5. Characteristics of the Test .......................................................................................................... 21 5.1. Applicable Limit Regulations ...............................................................................................21 5.2. Applicable Measurement Standards...................................................................................21 6. Conducted Output Power Measurement.................................................................................... 22 6.1. Summary ............................................................................................................................22 6.2. Conducted Power Results ..........................................................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1496 Page 63of 66 ANNEX G: The EUT Appearances 3-a: Front side Right To p Left Bottom Wifi TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1496 Page 64of 66 3-b: Back side Picture 3: Constituents of the EUT Picture 4: Test position 1 3mm 117mm 8mm 143mm TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1496 Page 65of 66 Picture 5: Test position 2 (This is not the most conservative antenna – to – user distance at edge mode. According to KDB 447498 4) ii) (2) –SAR is required only the edge with the most conservative exposure conditions, No SAR) Picture 6: Test position 3 0.8cm 14.3cm WiFi WiFi TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1496 Page 66of 66 Picture 7: Test position 4 Picture 8: Test position 5 (This is not the most conservative antenna – to – user distance at edge mode. According to KDB 447498 4) ii) (2) –SAR is required only the edge with the most conservative exposure conditions, No SAR) WiFi 0.3cm 11.7cm WiFi

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 2 of 110 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 3 of 110 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 25 4.2.1 RADIATED EMISSION LIMITS 25 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 25 4.2.3 TEST PROCEDURE 25 4.2.4 DEVIATION FROM TEST STANDARD 25 4.2.5 TEST SETUP 25 4.2.6 EUT OPERATING CONDITIONS 25 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 25 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 25 5 . BANDWIDTH TEST 25 5.1 APPLIED PROCEDURES / LIMIT 25 5.1.1 MEASUREMENT INSTRUMENTS LIST 25 5.1.2 TEST PROCEDURE 25 5.1.3 DEVIATION FROM STANDARD 25 5.1.4 TEST SETUP 25 5.1.5 EUT OPERATION CONDITIONS 25 5.1.6 TEST RESULTS 25 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 4 of 110 Table of Contents Page 6 . PEAK OUTPUT POWER TEST 25 6.1 APPLIED PROCEDURES / LIMIT 25 6.1.1 MEASUREMENT INSTRUMENTS LIST 25 6.1.2 TEST PROCEDURE 25 6.1.3 DEVIATION FROM STANDARD 25 6.1.4 TEST SETUP 25 6.1.5 EUT OPERATION CONDITIONS 25 6.1.6 TEST RESULTS 25 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 25 7.1 APPLIED PROCEDURES / LIMIT 25 7.1.1 MEASUREMENT INSTRUMENTS LIST 25 7.1.2 TEST PROCEDURE 25 7.1.3 DEVIATION FROM STANDARD 25 7.1.4 TEST SETUP 25 7.1.5 EUT OPERATION CONDITIONS 25 7.1.6 TEST RESULTS 25 8 . POWER SPECTRAL DENSITY TEST 25 8.1 APPLIED PROCEDURES / LIMIT 25 8.1.1 MEASUREMENT INSTRUMENTS LIST 25 8.1.2 TEST PROCEDURE 25 8.1.3 DEVIATION FROM STANDARD 25 8.1.4 TEST SETUP 25 8.1.5 EUT OPERATION CONDITIONS 25 8.1.6 TEST RESULTS 25 9 . EUT TEST PHOTO 25 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 5 of 110 1. CERTIFICATION E q u i p m e n t : Cruz Tablet Brand Name : N/A Model Name : Cruz Tablet T103; Cruz Tablet T105; Cruz Tablet T104 A p p l i c a n t : ADVANCED MULTI TECH PTE.LTD Date of Test : Sep. 23, 2010 ~ Sep. 28, 2010 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANCI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1009C186) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 6 of 110 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spurious EmissionPASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(b)(3) Peak Output Power PASS 15.209/15.205 Radiated Spurious Emission PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 7 of 110 2.1 TEST FACILITY The test facilities used to collect the test data in this report is CB03/DG-C03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China.523792 Neutron's test firm number is 319330 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 A. Conducted Measurement : Test Site Method Measurement Frequency Range U，(dB) NOTE DG-C03 CISPR 150 KHz ~ 30MHz 1.94 B. Radiated Measurement : Test Site Method Measurement Frequency Range Ant. H / V U，(dB) NOTE 30MHz ~ 200…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 100 of 104 Conducted Measurement Photos Video Play/Play Music & Photo/WIFI Mode (PHIHONG Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 100 of 104 9. EUT TEST PHOTO Conducted Measurement Photos Video Play/Play Music & Photo/WIFI Mode (PHIHONG Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 101 of 104 Conducted Measurement Photos USB Read& Write (PHIHONG Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 101 of 104 Conducted Measurement Photos USB Read& Write (PHIHONG Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 102 of 104 Conducted Measurement Photos Video Play/Play Music & Photo/WIFI Mode (DVE Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 102 of 104 Conducted Measurement Photos Video Play/Play Music & Photo/WIFI Mode (DVE Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 103 of 104 Conducted Measurement Photos USB Read& Write (DVE Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 103 of 104 Conducted Measurement Photos USB Read& Write (DVE Adapter) Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 104 of 104 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C186 Page 104 of 104 Radiated Measurement Photos