YHN-CHT1Wireless Controller

User Manual 一、 Connecting to the power： The voltages for this tubular motor is 3V。The black wire should connect to the positive and the black and white wire should connect to the negative. 二、 Emitter There are five kinds of emitters: following are the relevant pictures of button instruction: CHT-1 CHT-5 三、Programming: 1、Program channel on single and double remote control : (CHT-1,CHT-5) 1、Push programming button until motor jerks back and forth. 2、Push up and down button on the remote at the same time..... Motor confirms by jerking back and forth twice. 3、Done 4、Go on and add more channels in the same way. 5. The key is a switch and used to control the motor. Note：Each motor can listen to up to six different channels or remotes. 2、Remove all programming: 1、Push and hold programming button. 2、Motor jerks back and forth..... keep holding the programming button. 3、Motor jerks again back and forth twice. 4、Now all the channels are lost. 3、Change direction of motor: 1、Press up or down on your remote. Motor starts running. 2、Now press the programming button on the motor while the motor is running. The motor stops and jerks back and forth twice to confirm the signal. Done 3、Next time the motor moves the direction will be inversed. 4. The product is a vehicular device , it also can be used on the family purdah and the other different using for the user. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

YUYAO CHANS MOTOR CO., LTD. Data: June 7, 2010 FCC ID：YHN-CHT1 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Most Technology Service Co., Ltd Address: No.5, Langshan 2nd Rd, North Hi-Tech Industrial park, Nanshan, Shenzhen, Guangdong, China Name: Terry Job Title: Manager Email: [email protected] I am therefore responsible for the contents of the application. Model Name of the specified radio equipment: CHT1, CHT5 FCC ID: YHN-CHT1 Product Name: Wireless Controller Signature____________________ FCC grantee contact person information. Name/Title: LaiGao Wang (Engineer Director) Company Name: YUYAO CHANS MOTOR CO., LTD. Address: NO.1358,Tanjialing West Road, Yuyao, Zhejiang, China TEL: 86-574-62517010 FAX: 86-574-62517010 Email: [email protected]

FCC ID: YHN-CHT1 Report No.: MOST100511F1 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE FCC ID: YHN-CHT1 Report No.: MOST100511F1 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FCC ID: YHN-CHT1 Report No.: MOST100511F1 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE FCC ID: YHN-CHT1 Report No.: MOST100511F1 PHOTO OF THE SERIES MODEL(CHT-5)

FCC ID: YHN-CHT1 Report No.: MOST100511F1 INTERNAL PHOTO OF SAMPLE - 1 INTERNAL PHOTO OF SAMPLE - 2

Operation Description The product is a wireless controller, it can control the motor device to running or not, it is normally a vehicular device , it also can be used on the family purdah and the other different using for the user. Circuit Operation Description: The circuit was supplied by DC 3V power, IC EV1527 was a controller unit, it was connected with the key and LED light, It was transmitted a code to the 433 MHz crystal and generated 433 MHz filter wave, the filter carried power view the transmitter circuit to magnify and send out by the antenna. The modulation type is ASK and the antenna is internal. Function Operation Description: The voltages for this tubular motor is 3V. A. Program channel on the multiplex remote control: 1.Push programming button until motor jerks back and forth. 2.Push up and down button on the remote at the same time..... Motor confirms by jerking back and forth twice. 3.Done 4.Go on and add more channels in the same way. B Remove all programming: 1.Press up or down on your remote. Motor starts running. 2.Now press the programming button on the motor while the motor is running. The motor stops and jerks back and forth twice to confirm the signal. Done 3.Next time the motor moves the direction will be inversed.

Tune Up Description Product Wireless Controller Brand Name N/A Model Number CHT-1 Series Model Name: CHT-5 Series Model Difference description: Only the appearance and model name are different Power Supply DC 3V by battery Frequency Range 433.92 MHz Modulation Technique ASK Antenna Gain 1.0 dBi Temperature Range -10°C-50°C

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant : YUYAO CHANS MOTOR CO., LTD. Address : NO.1358,Tanjialing West Road,Yuyao,Zhejiang,China Product Name : Wireless Controller Model Name : CHT-1, CHT-5 Brand Name : N/A FCC ID : YHN-CHT1 Report No. : MOST100511F1 Date of Issue : June 24, 2010 Issued by :Most Technology Service Co., Ltd. Address : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 31 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: YHN-CHT1 Report No.: MOST100511F1 Page 2 of 31 TABLE OF CONTENTS 1．VERIFICATION OF CONFORMITY .............................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................ 5 2.1 Product Information ...................................................................................................................................... 5 2.2 Objective ...................................................................................................................................................... 6 2.3 Test Standards and Results .......................................................................................................................... 6 2.4 Environmental Conditions............................................................................................................................. 6 3. TEST METHODOLOGY ................................................................................................................................. 7 3. 1TEST FACILITY............................................................................................................................................ 7 3.2 GENERAL TEST PROCEDURES ................................................................................................................ 7 4 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................ 8 4.1 SETUP CONFIGURATION OF EUT............................................................................................................. 8 4.2 SUPPORT EQUIPMENT.............................................................................................................................. 8 4. 3 TEST EQUIPMENT LIST ............................................................................................................................ 9 5. 47 CFR Part 15 C Requirements.................................................................................................................. 10 5.1 Transmission Time ..................................................................................................................................... 10 5.1.1 Limit......................................................................................................................................................... 10 5.1.2 Test Configuration ................................................................................................................................... 10 5.1.3 Test Description ....................................................................................................................................... 10 5.1.4 Test Result............................................................................................................................................... 10 5.2 Duty Cycle ...................................................................................................................................................11 5.2.1 Limit..........................................................................................................................................................11 5.2.2 Test Configuration ....................................................................................................................................11 5.2.3 Test Description ........................................................................................................................................11 5.2.4 Test Result................................................................................................................................................11 5.3 Radiated Emission ..................................................................................................................................... 14 5.3.1 Definition ................................................................................................................................................. 14 5.3.2 Test Configuration ................................................................................................................................... 15 5.3.3 Test Description ....................................................................................................................................... 16 5.3.4 Test Result............................................................................................................................................... 17 5.4 20dB Bandwidth ......................................................................................................................................... 18 5.4.1 Definition ................................................................................................................................................. 18 5.4.2 Test Description ..................................................................…

Text truncated - open the document above for the full version.

FCC ID: YHN-CHT1 Report No.: MOST100511F1 Radiated Emission Test Setup